New to NAM
#1
#7
Trending Topics
#8
Pics as promised
These are right after we picked it up, i'll post better pictures later.
So far I have installed a Cravenspeed Garmin Bracket, Hardwire V1, VEI V1 Display Gauge, Cravenspeed Gauge Pod, and working on a few other things. I will have pictures of everything once I get it back from the tint guy this afternoon.
Edit: Forgot to mention I took the front plate bracket off, I'll show you what I did later
-Chris
These are right after we picked it up, i'll post better pictures later.
So far I have installed a Cravenspeed Garmin Bracket, Hardwire V1, VEI V1 Display Gauge, Cravenspeed Gauge Pod, and working on a few other things. I will have pictures of everything once I get it back from the tint guy this afternoon.
Edit: Forgot to mention I took the front plate bracket off, I'll show you what I did later
-Chris
Last edited by cemuscg; 03-08-2011 at 06:23 AM. Reason: Added another mod
#9
Pics as promised
Attachment 52076
Attachment 52075
These are right after we picked it up, i'll post better pictures later.
So far I have installed a Cravenspeed Garmin Bracket, Hardwire V1, VEI V1 Display Gauge, Cravenspeed Gauge Pod, and working on a few other things. I will have pictures of everything once I get it back from the tint guy this afternoon.
Edit: Forgot to mention I took the front plate bracket off, I'll show you what I did later
-Chris
Attachment 52076
Attachment 52075
These are right after we picked it up, i'll post better pictures later.
So far I have installed a Cravenspeed Garmin Bracket, Hardwire V1, VEI V1 Display Gauge, Cravenspeed Gauge Pod, and working on a few other things. I will have pictures of everything once I get it back from the tint guy this afternoon.
Edit: Forgot to mention I took the front plate bracket off, I'll show you what I did later
-Chris
#10
Well here's the story about the front plate bracket... The dealer had to get the MINI from CT and deliver it to PA... While he was on his way up I asked him to make sure they don't put the plate on the front, and come to find out the other dealer had already put it on... long story short, I got some nice black rubber fittings to cover the holes, I'm not too worried since my four Hella 500's (black Magic) are enroute right now and they will cover it up
Here's a pic of the rubber fittings:
Edit: The 2 smaller indents in the bumper to the left and right of the rubber fittings are I'm assuming where a euro plate would be mounted, they aren't too deep, but deep enough I notice them every time I look at it
-Chris
Here's a pic of the rubber fittings:
Edit: The 2 smaller indents in the bumper to the left and right of the rubber fittings are I'm assuming where a euro plate would be mounted, they aren't too deep, but deep enough I notice them every time I look at it
-Chris
Last edited by cemuscg; 03-08-2011 at 01:09 PM. Reason: Added wording
#11
Some more pictures of the new addition
18% Tint all around except for windshield
Garmin 1490LMT and VEI V1 Gauge, both mounted on Cravenspeed mounts
Anthracite Headliner (figured I'd post a picture since there aren't many on the forum)
-Chris
18% Tint all around except for windshield
Garmin 1490LMT and VEI V1 Gauge, both mounted on Cravenspeed mounts
Anthracite Headliner (figured I'd post a picture since there aren't many on the forum)
-Chris
Last edited by cemuscg; 03-08-2011 at 01:23 PM. Reason: Inserted wrong picture
#12
Very elegant solution, Chris. I would recommend that you go over to Aesthetic Creations and get something to cover those silly warning labels on your visors (http://www.aestheticreations.net/vin...cstickers.htm). They bothered me worse than the bumper dimples! Nice ride.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
Interior/Exterior Products
6
05-21-2023 04:51 AM
PelicanParts.com
Accessory Products
0
10-01-2015 01:23 PM
Mini Mania
Drivetrain Products
0
09-28-2015 09:13 AM
Mini Mania
Vendor Announcements
0
09-25-2015 12:32 PM