R60 Smelly Clutch
#551
Well...-5 degrees this morning and the doors were not functioning again. Had the dealer send a tech to come pick up the car a drop off another loaner. We are really starting to lose faith in the build quality of these cars. One more deep freeze and we will probably file another lemon law claim.
#552
Well, as I posted in another thread, my 2012 ALL4 original clutch went at 29k miles and the replacement (with the "upgraded" clutch) went at 37k miles (11 months after install with 8k miles on it). After some arguing, MINI agreed to pay for the initial teardown and inspection and the dealership identified that there is no manufacturer defect, so I am now trying to fight this with MINI USA. Not sure how my clutch skills - after nearly 25 years of driving manual cars, including many European performance cars - got so bad that I was only able to get 8k miles out of the second clutch!
#553
Do you have the work order for the second clutch repair....at same time they were to also replace the clutch pedal spring....check the part numbers to be sure it was the updated JCW clutch parts that went in. It should have been kicked back by warranty if not the correct part number, but for the sake of being thorough take a look.
What was the condition of the flywheel on second inspection, do you ever tow anything with the MINI ?
What was the condition of the flywheel on second inspection, do you ever tow anything with the MINI ?
#554
Do you have the work order for the second clutch repair....at same time they were to also replace the clutch pedal spring....check the part numbers to be sure it was the updated JCW clutch parts that went in. It should have been kicked back by warranty if not the correct part number, but for the sake of being thorough take a look.
What was the condition of the flywheel on second inspection, do you ever tow anything with the MINI ?
What was the condition of the flywheel on second inspection, do you ever tow anything with the MINI ?
No towing of any kind and live in mostly-flat area.
#555
2012 ALL4 Countryman
2012 - ALL4 Countryman. Already had my clutch replaced at 36k. Having clutch issues again at 65k miles. Luckily have the 5 year warranty on it. Took it in ... advised it would cost $4100 to replace. Warranty covers clutch ... but flywheel is not covered ... will need to pay $1400 to fix. Ugh!!!! Will be selling this car before the clutch goes out again. Asked the dealership why flywheel isn't covered especially given the track record with these cars and the clutch issues. Dealership is checking to see if they can give a 'better' price on the flywheel. So frustrating! ):
#556
Just curious on the flywheel - my paperwork states the flywheel was replaced in May 2016; but when I read this post, I notice a specific part number for the flywheel that is not listed in the parts on my paperwork:
I see the 21-20-7-595-577 as the flywheel - is that included in the-067 parts set and they don't list it out separately?
Got car back yesterday with new twin mass flywheel, clutch and various other parts, fork levers and springs installed. Major new clutch parts are #21-20-8-606-067 and 21-20-7-595-577.
#557
I see no flywheel billed out on this invoice.
If replaced, it would have to be on the bill so as to be reimbursed by MINI under warranty.
No way the shop would have absorbed a $700.00 flywheel and, for the tech to have been paid on the labor for that, it would have to be billed out. And techs dont work for free....
IMO, they noted damage to FW, and it was NOT replaced....
If replaced, it would have to be on the bill so as to be reimbursed by MINI under warranty.
No way the shop would have absorbed a $700.00 flywheel and, for the tech to have been paid on the labor for that, it would have to be billed out. And techs dont work for free....
IMO, they noted damage to FW, and it was NOT replaced....
#558
In addition to lack of Flywheel being billed out/replaced, I do not see the 6 flywheel bolts needed being billed out either...they are not re-usable !!! They obviously noted damage but replaced clutch, pressure plate and TO bearing only....
IMO they should be doing this job over again and not at any cost to you.
IMO they should be doing this job over again and not at any cost to you.
#559
In addition to lack of Flywheel being billed out/replaced, I do not see the 6 flywheel bolts needed being billed out either...they are not re-usable !!! They obviously noted damage but replaced clutch, pressure plate and TO bearing only....
IMO they should be doing this job over again and not at any cost to you.
IMO they should be doing this job over again and not at any cost to you.
my mistake I found the second page.
Trying to determine what to do. Dealer quoted me $3200. Mini agreed to pay for the initial teardown and inspection. Balance to complete job is $2050. Dealer offered 10% to help. Balance of $1800. I spoke to mini USA and their response was they are unwilling to help. 8k miles on a new clutch and flywheel is insane with a driver who was logged easily over a million miles with manual transmissions and never once had to replace a clutch on my own car.
MINI said that there is no one else I can speak to. That their "After Sales" department makes the final decision and that's it...any suggestions?
#560
#561
#562
I'VE GONE THROUGH THIS THREAD AND FOUND MANY EXAMPLES OF PEOPLE WHO HAD A SECOND CLUTCH FAIL WITH A SMALL NUMBER OF MILES AND I AM PUTTING TOGETHER SIGNIFICANT DOCUMENTATION TO SUBMIT TO SMALL CLAIMS COURT. Oops sorry caps was on.
Ok well frustrating to say the least! This has otherwise been a terrific car and lots of fun to drive. I have taken meticulous care of it and it is in excellent shape with only 37,000 miles on it. I can only imagine what happens to those cars that people either beat on or don't maintain. Thanks for everyone's help and suggestions.
#563
Thread
Thread Starter
Forum
Replies
Last Post
drrigg
R50/R53 :: Hatch Talk (2002-2006)
6
05-27-2022 03:31 AM
eliseo1981
MINI Parts for Sale
4
11-02-2015 11:24 AM
unxpectederror
Drivetrain (Cooper S)
5
10-22-2015 12:16 PM
ECSTuning
Vendor Announcements
0
10-01-2015 12:13 PM
Mini Mania
Drivetrain Products
0
09-28-2015 09:13 AM