R60 What did you do to your Countryman TODAY?
#2501
You are welcome. Looks great Juts that lower lip improves the whole front end.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#2502
Looks good man! That JCW lip spoiler totally changes the look of the countryman. I have the JB+ as well as a place holder until I have the parts ready for the Manic Stage2... Just need an intercooler now.
#2503
#2504
6th Gear
iTrader: (8)
There should've been a little gain in low end response since its a lot smoother now, but with the stock tune it may not feel like much. Definitely not going to gain power from this mod. The major difference with this is when you tune your engine and raise your boost, response tends to be much much better.
#2506
I actually went through ECS it looks like they offer the same price point its possible it has MAP (minimum advertised price) so vendors generally have the same price. ECS offered free shipping on the competition not sure that wagner does...
Do you have a full on front shot? I think i like it but need to see more. I think it would look good with my red and black but i would need to black out the chrome rings.
Do you have a full on front shot? I think i like it but need to see more. I think it would look good with my red and black but i would need to black out the chrome rings.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#2508
#2509
Congrats on the new CM, black is a hard car to get the swirl marks out of.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#2510
Right now I like the black look but may go back to stripes sometime.
#2511
Just picked up a 2012 CMS All4 w only 10k miles on it!
This is my first mini. I've always wanted a mini. I've been looking at them and saw this deal and had to jump on it. I wanted a 2 door but I had to go with a CM due to the bear/dog I have (135lb American Akita). I am liking the CM more and more though. The ground clearance and size is definitely a plus!
Anyway, I have had it for 3 weeks now and just got the stripes done.
Window tint is scheduled for this Friday. Going with 65% on the front doors, 5% for the back doors, 25% or 50% for the hatch glass, and a 4" 25% stripe across the windshield.
just ordered upgraded front cupholders
decided to go with a checkered flag theme bc I don't think much else will go with "light coffee". I just ordered checkered flag lower steering wheel piece, checkered paddle shifter "buttons," and the "S" start button
It has silver/gray around the dash vents and the "mickey mouse." I want to do these dash pieces in black but just the center accent piece is $300+ from mini! Might just have them painted instead.
I was kind of annoyed that it already had that ugly front plate holder on it. The holes are already there, so I will probably get some sort of mini vanity plate.
Also not a fan of the chrome. Still contemplating blacking it all out, including the black inserts for the headlights.
I'm excited to make this mini mine! $$$$$$$!
Ignore the pollen all over the hood. Spring in West Michigan is crazy!
This is my first mini. I've always wanted a mini. I've been looking at them and saw this deal and had to jump on it. I wanted a 2 door but I had to go with a CM due to the bear/dog I have (135lb American Akita). I am liking the CM more and more though. The ground clearance and size is definitely a plus!
Anyway, I have had it for 3 weeks now and just got the stripes done.
Window tint is scheduled for this Friday. Going with 65% on the front doors, 5% for the back doors, 25% or 50% for the hatch glass, and a 4" 25% stripe across the windshield.
just ordered upgraded front cupholders
decided to go with a checkered flag theme bc I don't think much else will go with "light coffee". I just ordered checkered flag lower steering wheel piece, checkered paddle shifter "buttons," and the "S" start button
It has silver/gray around the dash vents and the "mickey mouse." I want to do these dash pieces in black but just the center accent piece is $300+ from mini! Might just have them painted instead.
I was kind of annoyed that it already had that ugly front plate holder on it. The holes are already there, so I will probably get some sort of mini vanity plate.
Also not a fan of the chrome. Still contemplating blacking it all out, including the black inserts for the headlights.
I'm excited to make this mini mine! $$$$$$$!
Ignore the pollen all over the hood. Spring in West Michigan is crazy!
#2512
Just picked up a 2012 CMS All4 w only 10k miles on it!
This is my first mini. I've always wanted a mini. I've been looking at them and saw this deal and had to jump on it. I wanted a 2 door but I had to go with a CM due to the bear/dog I have (135lb American Akita). I am liking the CM more and more though. The ground clearance and size is definitely a plus!
Anyway, I have had it for 3 weeks now and just got the stripes done.
Window tint is scheduled for this Friday. Going with 65% on the front doors, 5% for the back doors, 25% or 50% for the hatch glass, and a 4" 25% stripe across the windshield.
just ordered upgraded front cupholders
decided to go with a checkered flag theme bc I don't think much else will go with "light coffee". I just ordered checkered flag lower steering wheel piece, checkered paddle shifter "buttons," and the "S" start button
It has silver/gray around the dash vents and the "mickey mouse." I want to do these dash pieces in black but just the center accent piece is $300+ from mini! Might just have them painted instead.
I was kind of annoyed that it already had that ugly front plate holder on it. The holes are already there, so I will probably get some sort of mini vanity plate.
Also not a fan of the chrome. Still contemplating blacking it all out, including the black inserts for the headlights.
I'm excited to make this mini mine! $$$$$$$!
Ignore the pollen all over the hood. Spring in West Michigan is crazy!
This is my first mini. I've always wanted a mini. I've been looking at them and saw this deal and had to jump on it. I wanted a 2 door but I had to go with a CM due to the bear/dog I have (135lb American Akita). I am liking the CM more and more though. The ground clearance and size is definitely a plus!
Anyway, I have had it for 3 weeks now and just got the stripes done.
Window tint is scheduled for this Friday. Going with 65% on the front doors, 5% for the back doors, 25% or 50% for the hatch glass, and a 4" 25% stripe across the windshield.
just ordered upgraded front cupholders
decided to go with a checkered flag theme bc I don't think much else will go with "light coffee". I just ordered checkered flag lower steering wheel piece, checkered paddle shifter "buttons," and the "S" start button
It has silver/gray around the dash vents and the "mickey mouse." I want to do these dash pieces in black but just the center accent piece is $300+ from mini! Might just have them painted instead.
I was kind of annoyed that it already had that ugly front plate holder on it. The holes are already there, so I will probably get some sort of mini vanity plate.
Also not a fan of the chrome. Still contemplating blacking it all out, including the black inserts for the headlights.
I'm excited to make this mini mine! $$$$$$$!
Ignore the pollen all over the hood. Spring in West Michigan is crazy!
Also, ECS and Mini Parts have the black out light rings pretty inexpensive
The following users liked this post:
BlakeC (05-03-2018)
#2513
#2514
Finally got everything together. Hadn't posted pics before because everything was kind of being done at the same time. Just washed/waxed her up and took a couple pics.
KW V3 Coilovers
Hotchkis rear control arms
Milltek cat back exhaust with black MBRP tips
Flat black vinyl wrapped head/tail light rings
ECS Black Line Tail Lights
Outmotoring Smoked Side Markers
Outmotoring Smoked Scuttle Turn Signals
Joey Mod Head lights
Outmotoring LED Driving Lights
Enkei T6S 18x8 et42 Wheels
Continental ExtremeContact Sport 235/40R18
The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon.
KW V3 Coilovers
Hotchkis rear control arms
Milltek cat back exhaust with black MBRP tips
Flat black vinyl wrapped head/tail light rings
ECS Black Line Tail Lights
Outmotoring Smoked Side Markers
Outmotoring Smoked Scuttle Turn Signals
Joey Mod Head lights
Outmotoring LED Driving Lights
Enkei T6S 18x8 et42 Wheels
Continental ExtremeContact Sport 235/40R18
The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon.
Last edited by HasAnMTBProblem; 05-08-2017 at 10:03 AM.
#2516
Got the tint done a few days ago. Also washed and waxed since the last photos... much better without a coating of pollen!
I ended up going with 5% on the rear side windows, 15% on the rear hatch window, 15% on the stripe across the windshield, and 50% on the front side windows. The cops are pretty bad around here and made us remove the tint on my wife's focus bc her front windows were too dark, so I thought I'd play it safe. Still like it MUCH better than no tint!
I ended up going with 5% on the rear side windows, 15% on the rear hatch window, 15% on the stripe across the windshield, and 50% on the front side windows. The cops are pretty bad around here and made us remove the tint on my wife's focus bc her front windows were too dark, so I thought I'd play it safe. Still like it MUCH better than no tint!
Last edited by BlakeC; 05-08-2017 at 05:43 AM.
#2517
The color is a custom job. I was shooting for the Volk bronze color. They turned out quite a bit darker, but I think I like it even more.
#2518
Finally got everything together. Hadn't posted pics before because everything was kind of being done at the same time. Just washed/waxed her up and took a couple pics.
KW V3 Coilovers
Hotchkis rear control arms
Milltek cat back exhaust with black MBRP tips
Flat black vinyl wrapped head/tail light rights
ECS Black Line Tail Lights
Outmotoring Smoked Side Markers
Outmotoring Smoked Scuttle Turn Signals
Joey Mod Head lights
Outmotoring LED Driving Lights
Enkei T6S 18x8 et42 Wheels
Continental ExtremeContact Sport 235/40R18
The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon.
KW V3 Coilovers
Hotchkis rear control arms
Milltek cat back exhaust with black MBRP tips
Flat black vinyl wrapped head/tail light rights
ECS Black Line Tail Lights
Outmotoring Smoked Side Markers
Outmotoring Smoked Scuttle Turn Signals
Joey Mod Head lights
Outmotoring LED Driving Lights
Enkei T6S 18x8 et42 Wheels
Continental ExtremeContact Sport 235/40R18
The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon.
#2519
#2520
Finally got everything together. Hadn't posted pics before because everything was kind of being done at the same time. Just washed/waxed her up and took a couple pics.
KW V3 Coilovers
Hotchkis rear control arms
Milltek cat back exhaust with black MBRP tips
Flat black vinyl wrapped head/tail light rights
ECS Black Line Tail Lights
Outmotoring Smoked Side Markers
Outmotoring Smoked Scuttle Turn Signals
Joey Mod Head lights
Outmotoring LED Driving Lights
Enkei T6S 18x8 et42 Wheels
Continental ExtremeContact Sport 235/40R18
The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon.
KW V3 Coilovers
Hotchkis rear control arms
Milltek cat back exhaust with black MBRP tips
Flat black vinyl wrapped head/tail light rights
ECS Black Line Tail Lights
Outmotoring Smoked Side Markers
Outmotoring Smoked Scuttle Turn Signals
Joey Mod Head lights
Outmotoring LED Driving Lights
Enkei T6S 18x8 et42 Wheels
Continental ExtremeContact Sport 235/40R18
The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon.
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html
#2521
First Ive heard of these Black Line Tail Lights, do you happen to have a pic of them compared to the stock ones? The pics on ECS dont really make it look much different, are they noticiably darker? seems pretty pricey otherwise.
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html
#2522
They are here and are dark vs stock. Also, they come with the outside rings in black. Maybe those pics will help.
https://www.northamericanmotoring.co...and-rings.html
https://www.northamericanmotoring.co...and-rings.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#2523
They are here and are dark vs stock. Also, they come with the outside rings in black. Maybe those pics will help.
https://www.northamericanmotoring.co...and-rings.html
https://www.northamericanmotoring.co...and-rings.html
Id love to see a side by side comparison.
#2524
First Ive heard of these Black Line Tail Lights, do you happen to have a pic of them compared to the stock ones? The pics on ECS dont really make it look much different, are they noticiably darker? seems pretty pricey otherwise.
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html
#2525