R60 What did you do to your Countryman TODAY?
#2626
Great!
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#2629
Helped my son put the Winter tires on. He was amazed that I take a screwdriver to all the embedded rocks in the treads, figured I was nuts for doing so as it will just fill up again.....
visual inspection found a nail in the tire, that is why I look them over before putting them back on and why I'm glad the tire shop isn't doing it.
We seem to be getting a lot of nails, etc. in our tires recently.
visual inspection found a nail in the tire, that is why I look them over before putting them back on and why I'm glad the tire shop isn't doing it.
We seem to be getting a lot of nails, etc. in our tires recently.
#2630
Helped my son put the Winter tires on. He was amazed that I take a screwdriver to all the embedded rocks in the treads, figured I was nuts for doing so as it will just fill up again.....
visual inspection found a nail in the tire, that is why I look them over before putting them back on and why I'm glad the tire shop isn't doing it.
We seem to be getting a lot of nails, etc. in our tires recently.
visual inspection found a nail in the tire, that is why I look them over before putting them back on and why I'm glad the tire shop isn't doing it.
We seem to be getting a lot of nails, etc. in our tires recently.
#2631
Lucy is going in for new rear pads and rotors. Thank you maintenance plan, it will now have paid for itself just over 3X with two more years to go.
Dropping the 2005 Xterra off to the shop at the same time and then going cruising in whatever loaner Mini we get. The Xterra has 64K on it and this will be it's second dealer visit in 12 years. 1st was for a recall on the trailer harness and this time is so they can figure out why the passenger side turn signal does not work on my trailer (yes I rewired and put all new lights on the trailer - Then tested the plug on the Xterra - Hey all new LED's on the trailer). The Xterra is our deep snow and general Mini back-up car - also used to tow boat and trailer.
Dropping the 2005 Xterra off to the shop at the same time and then going cruising in whatever loaner Mini we get. The Xterra has 64K on it and this will be it's second dealer visit in 12 years. 1st was for a recall on the trailer harness and this time is so they can figure out why the passenger side turn signal does not work on my trailer (yes I rewired and put all new lights on the trailer - Then tested the plug on the Xterra - Hey all new LED's on the trailer). The Xterra is our deep snow and general Mini back-up car - also used to tow boat and trailer.
#2632
6th Gear
iTrader: (8)
Dropping the 2005 Xterra off to the shop at the same time and then going cruising in whatever loaner Mini we get. The Xterra has 64K on it and this will be it's second dealer visit in 12 years. 1st was for a recall on the trailer harness and this time is so they can figure out why the passenger side turn signal does not work on my trailer (yes I rewired and put all new lights on the trailer - Then tested the plug on the Xterra - Hey all new LED's on the trailer). The Xterra is our deep snow and general Mini back-up car - also used to tow boat and trailer.
#2633
#2634
Nice you got the Sonar ones. Make a huge improvement on the front end.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#2635
I would be interested to know about the milkshake prevention.
#2636
#2638
6th Gear
iTrader: (8)
Since I have no clue what this is I will say no. Dealer suggested tans fluid and differential fluid changes since it is at 60K. I have had bad luck with transmission fluid changes I have had three done (by dealers) in cars/suvs in my life and all three failed shortly after the change. So my theory since then is why make it fail earlier.
I would be interested to know about the milkshake prevention.
I would be interested to know about the milkshake prevention.
http://www.thenewx.org/forum/11-powe...t-threads.html
#2639
I'm in West Michigan, 20 miles from Lake Michigan and we have been getting hammered w snow so I just added new winter wheels & tires
Firestone just released their Winterforce II's so I thought I'd try them. Only $90/ea and so far they are performing just as well as my Blizzaks did AND at almost half the price!
Not much road noise at all and much smoother than the run flats! lol
Instead of steel wheels, I paid $10 more each and got some Focal Alloy wheels from tire rack.
Loving the performance and the look so far!
Firestone just released their Winterforce II's so I thought I'd try them. Only $90/ea and so far they are performing just as well as my Blizzaks did AND at almost half the price!
Not much road noise at all and much smoother than the run flats! lol
Instead of steel wheels, I paid $10 more each and got some Focal Alloy wheels from tire rack.
Loving the performance and the look so far!
#2642
I am contemplating the LED kits from ECSTuning- between $65 and $110 depending on watts, come with a error corrector too- dont know if they can tell us how hot the little box (resistor) gets, I want to mount min inside my housing if it can handle whatever heat it produces-
would love to see someone else try them first lol-
I am also wanting to see if anyones done their Dragon Laminate on their headlight too-
Maybe ECSTuning can post on here regarding this
#2643
help me decide
need some help deciding what color schematic to do on my scuttles
they are currently the graphite color- Im wanting to either do them in White with the honey comb section red, or in Red with the honeycomb White
as you can see- I have red mirror caps and red brake ducts and white roof and stripes, so its a matter of trying to match without making it obnoxious
tell me what you guys think
they are currently the graphite color- Im wanting to either do them in White with the honey comb section red, or in Red with the honeycomb White
as you can see- I have red mirror caps and red brake ducts and white roof and stripes, so its a matter of trying to match without making it obnoxious
tell me what you guys think
#2644
how do you like those so far? was the wiring easy? are those the ones for like $425 from ECSTuning? do the projectors actually focus the light like they are supposed to (i ask because ive seen aftermarket projectors and HID kits that pretty much make the light disappear or focus it to a point that you can only see like a 2 foot radius)
lots of questions i know, just curious
#2645
how do you like those so far? was the wiring easy? are those the ones for like $425 from ECSTuning? do the projectors actually focus the light like they are supposed to (i ask because ive seen aftermarket projectors and HID kits that pretty much make the light disappear or focus it to a point that you can only see like a 2 foot radius)
lots of questions i know, just curious
lots of questions i know, just curious
The main lights are plug and play with the factory connectors, but you need to piggyback off of your parking lights to get the plasma tube light going. It was not hard at all to wire the plasma tube using the supplied connectors.
The Projectors do focus the beam more to the front of you vs all over the place and they seems a bit brighter. You can adjust how far up/low or how far to the left/right you want the beam.
As for scuttle colors. Since your roof is white, I’d probably go white with the scuttles with the red mesh. If you ever do wheel blacked out would be cool, but white with a red line around the lip would tighten up that look
#2647
Hey! These are a couple of things I call the angry eyes. It gives the front end a bit more aggressive look I think. All i did was buy some carbon fibre vinyl off of a local vinyl shop, mocked it up on the headlights, and pressed it on. It took a few tries to get it right but in the end I'm really happy with it.
#2648
need some help deciding what color schematic to do on my scuttles
they are currently the graphite color- Im wanting to either do them in White with the honey comb section red, or in Red with the honeycomb White
as you can see- I have red mirror caps and red brake ducts and white roof and stripes, so its a matter of trying to match without making it obnoxious
tell me what you guys think
they are currently the graphite color- Im wanting to either do them in White with the honey comb section red, or in Red with the honeycomb White
as you can see- I have red mirror caps and red brake ducts and white roof and stripes, so its a matter of trying to match without making it obnoxious
tell me what you guys think
#2649
Hey! These are a couple of things I call the angry eyes. It gives the front end a bit more aggressive look I think. All i did was buy some carbon fibre vinyl off of a local vinyl shop, mocked it up on the headlights, and pressed it on. It took a few tries to get it right but in the end I'm really happy with it.
#2650
So- I tried red first, I think Im going to do as suggested and have them hydro-dipped white with red inside. surprised I cant find the inset in red anywhere, can find all other colors, just not red.......
doing the engine cover in blue to match the car
next will be the gloss black interior pieces to match the blue as well.
doing the engine cover in blue to match the car
next will be the gloss black interior pieces to match the blue as well.