R60 What did you do to your Countryman TODAY?
#1401
The back flaps there's 2 pins that get broken the one under the car in the back is the worst. once that is removed your committed. The tools needed are a 1/4 drive, 8mm socket, a pair of pliers or channel locks, and a couple of flat head screw drivers. What I did was used a bucket or hot soapy water and a rag to clean all around where the mud flap would sit then dried it and then wiped it with rubbing alcohol to get rid of any wax or coating on the plastic. then I removed the under plastic pin and the bolts needed for the guard. I then wiped the area with the wipe that came with the rear guards. I found getting the under bolt in first worked out the best for me. The clips that come with the guards do not slide over the under brace that the bottom of the guard attaches to. Had to set the clip on top of the brace worked fine. Just get that one started and then have guard in place and add the other bolts with washers and the one pin thenjust snug it all up. good luck
#1402
Yes, from Sewell. Good prices and fast shipping. Just got the side vents in too, which I will install today. My local dealership is a rip off...they tried to charge me $120 for one of the front pressure lips (flap hanging down in front of front tires). Found it on Sewell for less than $9. Now looking for a different dealership for service.
#1403
Got my front mud guards installed (thanks for the input, Mr Smooth) First one took some time...took a bit trying to get those plastic tabs out, but figured the easiest thing to do was to drill them out. Wrapped up the second one in about 10 minutes.
Will attempt the rears tomorrow..maybe.
Will attempt the rears tomorrow..maybe.
#1404
Yes, from Sewell. Good prices and fast shipping. Just got the side vents in too, which I will install today. My local dealership is a rip off...they tried to charge me $120 for one of the front pressure lips (flap hanging down in front of front tires). Found it on Sewell for less than $9. Now looking for a different dealership for service.
#1405
The front pressure lip trim Part # 8 , you can do yourself, its not too hard , just line up and use #9 press in expansion fixing plug.
#9 Fixing Plug Black - Priced Each Part # 51471911992
http://www.ecstuning.com/Search/SiteSearch/51471911992/ES2676227/
And we have parts right here:
Pressure Lip Seal - Front Left ( driver side ) Part #51119802643
http://www.ecstuning.com/Search/SiteSearch/51119802643/
&
Pressure Lip Seal - Front Right ( passenger side ) Part # 51119802644
http://www.ecstuning.com/Search/SiteSearch/51119802644/
Thanks
#9 Fixing Plug Black - Priced Each Part # 51471911992
http://www.ecstuning.com/Search/SiteSearch/51471911992/ES2676227/
And we have parts right here:
Pressure Lip Seal - Front Left ( driver side ) Part #51119802643
http://www.ecstuning.com/Search/SiteSearch/51119802643/
&
Pressure Lip Seal - Front Right ( passenger side ) Part # 51119802644
http://www.ecstuning.com/Search/SiteSearch/51119802644/
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1410
The front pressure lip trim Part # 8 , you can do yourself, its not too hard , just line up and use #9 press in expansion fixing plug.
http://www.ecstuning.com/Search/SiteSearch/51471911992/ES2676227/
http://www.ecstuning.com/Search/SiteSearch/51119802643/
http://www.ecstuning.com/Search/SiteSearch/51119802644/
Thanks
http://www.ecstuning.com/Search/SiteSearch/51471911992/ES2676227/
http://www.ecstuning.com/Search/SiteSearch/51119802643/
http://www.ecstuning.com/Search/SiteSearch/51119802644/
Thanks
#1411
ECS, thanks and exactly what I'm talking about...you have it for $8 and my dealer tries to charge me $120. Pretty stupid in the day of internet searches. Already ordered the plugs as I will install myself, but looking for a new dealer for normal service since I don't trust them now.
Thanks, you are welcome.
The quicker you order things, the quicker we can try to get them in. Sometimes we can get them sooner, it just depends what it is.
Also we are here to help with questions and such.
Post up some pics when you get it done. Helps out people with the same issues.
Thanks again.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 12-13-2013 at 01:07 PM.
#1413
#1414
#1419
Installed!
Finally got my bigger cup holders in....Thanx for the fast shipping(2days) Sewell parts!!! This was a very simple project around 15 min start to finish and they are much bigger and work great! If you are always runnin through the drive thru and love your soda like me this is a "must have" MOD.
#1420
#1421
Same!
Finally got my bigger cup holders in....Thanx for the fast shipping(2days) Sewell parts!!! This was a very simple project around 15 min start to finish and they are much bigger and work great! If you are always runnin through the drive thru and love your soda like me this is a "must have" MOD.
#1422
#1423
We have the front larger cup holders / Mickey ( center speedo) Upgrade & matching side dash vents / rear dual cup holder thread here.
https://www.northamericanmotoring.co...-a-12-a-8.html
&
https://www.northamericanmotoring.co...a-12-a-10.html
https://www.northamericanmotoring.co...-a-12-a-8.html
&
https://www.northamericanmotoring.co...a-12-a-10.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1424
We have the front larger cup holders / Mickey ( center speedo) Upgrade & matching side dash vents / rear dual cup holder thread here. https://www.northamericanmotoring.co...-a-12-a-8.html & https://www.northamericanmotoring.co...a-12-a-10.html
What's the eta on the rear cupholders and all parts needed?