R60 What did you do to your Countryman TODAY?
#176
#177
#178
Just looked at drivers front wheel, I curbed it late Friday night swerving to avoid getting clipped. Well this much I knew driving home, no balance or alignment issues. Will put her on a lift later and double check.
Looking at the situation as a good reason to get my 18's, anyone have twin spoke 18's for a reasonable price...
Looking at the situation as a good reason to get my 18's, anyone have twin spoke 18's for a reasonable price...
#179
#181
#184
#185
Visited Octane Guy and picked up a couple gallons of Hydro and Mystique to keep Sargent looking good; then further up the road visited Jerry at NM Engineering and was informed of their next product for our CM's, their soon to be released rear sway as well as the latest on their upcoming ECU Tune for the post Feb 12 build CM's...all this while on a road trip with the Mrs...
#186
Gave it a full detail, vacuumed the interior for over an hour and still could not get all the dog hair out of the cheap carpet. Oh well, it's as clean as it's going to get this time around.
I also tried a car cover from my 6 series and it fits! Well, it mostly fits. The front is really saggy but the rear fits fine. I picked up a BMW cover for the 6 recently and I did not know what I was going to do with the aftermarket one, but it just got handed down to the CM!
I also tried a car cover from my 6 series and it fits! Well, it mostly fits. The front is really saggy but the rear fits fine. I picked up a BMW cover for the 6 recently and I did not know what I was going to do with the aftermarket one, but it just got handed down to the CM!
#187
Saturday I installed my VIP Fog Brackets & my Hella 500 fogs. Ran the relay harness & have the signal wire fed into the car. Going to order an OEM fog switch this morning to replace a dummy sw. & then have separate control of the 500 fogs.
(This install was a DIY thread for the most part...coming soon)
Install requires removing grill/trimming, routing a relay wire harness, finding grounds & routing through the firewall.
Washed it yesterday & went to 2 car events.
(This install was a DIY thread for the most part...coming soon)
Install requires removing grill/trimming, routing a relay wire harness, finding grounds & routing through the firewall.
Washed it yesterday & went to 2 car events.
#188
well YESTERDAY I vacuumed the floor mats and washed my CM and gave it a coat of wax.
I'm pretty impressed with the Meguiar's Ultimate Liquid Wax's application in full hot sun. It didn't do anything weird and buffed off nicely with my microfiber cloths. I did two applications before buffing on the horizontal surfaces.
I'm pretty impressed with the Meguiar's Ultimate Liquid Wax's application in full hot sun. It didn't do anything weird and buffed off nicely with my microfiber cloths. I did two applications before buffing on the horizontal surfaces.
#192
#193
#196
#197