R60 What did you do to your Countryman TODAY?
#1976
#1980
KohlerSC -
This is the NM Engineering R60 Rear sway bar : 22mm adjustable NM.258860
http://www.ecstuning.com/Search/SiteSearch/NM.258860/
![](http://c1552172.r72.cf0.rackcdn.com/666151_x600.jpg)
And we now Carry Milltek Exhaust for the R60 S All4 :
Cat Back SSXM402
http://www.ecstuning.com/Search/SiteSearch/SSXM402/
![](http://c1552172.r72.cf0.rackcdn.com/693243_x600.jpg)
and
Turbo Back SSXM400
http://www.ecstuning.com/Search/SiteSearch/SSXM400/
![](http://c1552172.r72.cf0.rackcdn.com/693292_x600.jpg)
thanks
This is the NM Engineering R60 Rear sway bar : 22mm adjustable NM.258860
http://www.ecstuning.com/Search/SiteSearch/NM.258860/
![](http://c1552172.r72.cf0.rackcdn.com/666151_x600.jpg)
And we now Carry Milltek Exhaust for the R60 S All4 :
Cat Back SSXM402
http://www.ecstuning.com/Search/SiteSearch/SSXM402/
![](http://c1552172.r72.cf0.rackcdn.com/693243_x600.jpg)
and
Turbo Back SSXM400
http://www.ecstuning.com/Search/SiteSearch/SSXM400/
![](http://c1552172.r72.cf0.rackcdn.com/693292_x600.jpg)
thanks
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 06-03-2015 at 06:04 AM.
#1982
Nope they have it and support it and we are there largest stocking distributor in the America.
![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1984
Damn you ECS...I had looked into getting one earlier this year but had been told they were no longer supported, so I moved on (financially and emotionally), now you're pulling at my heartstrings. I still really want to hear this exhaust in person before dropping the $ though.
#1985
Sorry , I did not know or hear about this.
Ok, yea where did you hear this?
Here some examples people posted of the Milltek, sounds good.
Ok, yea where did you hear this?
Here some examples people posted of the Milltek, sounds good.
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1986
#1987
No problem, not mad , just wanted to make sure.
We are really happy to carry Milltek and stock most if not all exhaust with pictures.
![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1989
Bought new plugs/wrench from ECS and installed today. Photo is of old plug with Corona around insulator which apparently is normal according to Beru and all the other plug manufacturers. Plugs weren't due and didn't look bad, although the gaps were wider than the new plugs so I changed them out. Butt dyno says slight improvement.
Attachment 110661
Attachment 110661
Last edited by Minnie.the.Moocher; 08-20-2019 at 03:50 PM.
#1990
Thanks for the purchases.
Browning is typical with age / heat.
![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1991
#1993
Yes , we have them and many other instock Milltek exhaust. ![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
If you need Milltek , we have you covered.
![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
If you need Milltek , we have you covered.
![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1994
Free shipping on Milltek for a Limited time.
![Smilie](https://www.northamericanmotoring.com/forums/images/smilies/smile.gif)
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#1995
Filled the tank, Fred Meyer gasoline station which is Shell Oil Gas. Generally cheaper than most other places. Now the rest of the story. Idiot puts in regular when I asked for Premium fill, then said sorry.
Big help. Spoke to manager who offered to have the "truck" come and drain the tank and put the right gas in. However that was a 1 hour wait at best. Obviously this is a pretty common event. I had him throw in a can of octane booster on the house and went on my way.
All in all I'm avoiding this place in the future, but the manager was pretty cool.
Got me thinking and then I found this site http://www.gnttype.org/techarea/misc/octanebooster.html anyone have any experience with home brew booster?
![Mad](https://www.northamericanmotoring.com/forums/images/smilies/mad.gif)
![Thumbs Up](https://www.northamericanmotoring.com/forums/images/smilies/thumb-up.gif)
Got me thinking and then I found this site http://www.gnttype.org/techarea/misc/octanebooster.html anyone have any experience with home brew booster?
#1999
Nice !
__________________
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
![](https://www.northamericanmotoring.com/forums/signaturepics/sigpic130940_6.gif)
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172