R60 22mm Sway bar
#1
22mm Sway bar
Hi all I am new here so I am still learning. Does anyone know for sure if the countryman all4 shares the same rear sway bar as a 2 wheel drive countryman. Also has anyone here upgraded their rear sway bar. Mine is a Cooper D with a 16mm bar. The sport has a 17mm bar. But most people that do the mod fit a 22mm bar. I just wanted to stop the car leaning in tight corners. Will it improve things, or upset the unique handling of this lovely vehicle. I apologize if this subject has been covered before.
Last edited by Nick89; 04-01-2016 at 03:32 PM.
#2
My JCW CM, I just installed NM springs and 22mm on stiff. Helped a good amount mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
Last edited by MarioKart; 04-01-2016 at 03:51 PM.
#4
Greetings from SO-FLA,
This is from VIP's website. I purchased and installed on my vehicle and the difference was night/day along with some MR Lowering Springs. It was a pretty easy install and fit & finsih is perfect. Good Luck
"The VIP Sway bar 23MM Countryman rear sway bar will increase handling and cornering grip over the O.E.M. 16MM rear sway bar. Our 3-position rear sway bar is adjustable for those track days. We manufacture all our sway bars from high strength solid 4140 Chromoly. We only use the best material. One prime coat and then one finish coat in Bright Red. This kit comes complete with new greaseable sway bar D bushings and full instructions."
http://www.vipcustomparts.com/R60%20parts%20page.htm
This is from VIP's website. I purchased and installed on my vehicle and the difference was night/day along with some MR Lowering Springs. It was a pretty easy install and fit & finsih is perfect. Good Luck
"The VIP Sway bar 23MM Countryman rear sway bar will increase handling and cornering grip over the O.E.M. 16MM rear sway bar. Our 3-position rear sway bar is adjustable for those track days. We manufacture all our sway bars from high strength solid 4140 Chromoly. We only use the best material. One prime coat and then one finish coat in Bright Red. This kit comes complete with new greaseable sway bar D bushings and full instructions."
http://www.vipcustomparts.com/R60%20parts%20page.htm
Thread
Thread Starter
Forum
Replies
Last Post
Mark A
1st Gen Countryman (R60) Talk (2010-2015)
13
02-28-2016 08:45 AM