F60 2011 Countryman S P0010 code help
#1
2011 Countryman S P0010 code help
Hey all, so I'm back with some more issues with my Countryman.
Background. Had the timing chain replaced and the FRM module replaced.
I'm now getting a P0010 code, which shows that there is an open circuit on the intake VANOS. Trying to figure out if there is a fuse, a bad wire, a loose connection, or if that is an indication of a bad solenoid. Any help would be greatly appreciated.
Background. Had the timing chain replaced and the FRM module replaced.
I'm now getting a P0010 code, which shows that there is an open circuit on the intake VANOS. Trying to figure out if there is a fuse, a bad wire, a loose connection, or if that is an indication of a bad solenoid. Any help would be greatly appreciated.
#2
Fault service plan involves checking the wiring, then replacing the solenoid valve:
https://bmwfault.codes/XMLDiagView?d...EAOAAyADAANAA=
If the connector looks good, I would just go ahead and replace the solenoid.
https://www.ecstuning.com/b-hamburg-...368610388~ham/
https://bmwfault.codes/XMLDiagView?d...EAOAAyADAANAA=
If the connector looks good, I would just go ahead and replace the solenoid.
https://www.ecstuning.com/b-hamburg-...368610388~ham/
#3
The following 2 users liked this post by navwizard:
2014 MC (08-31-2020),
ColtTheBolt (09-29-2021)
Thread
Thread Starter
Forum
Replies
Last Post
ChopperDan
Stock Problems/Issues
2
02-20-2018 05:19 AM