Bimmercode App
#302
tried all of these steps and then some. i had to go into expert mode and change a few other settings in bimmercode to even get the video options to show even though i do have the NBT_EVO module. sadly i think our HUs don't do video.. seriously, i have one of the most expensive MINIs out there and i can't do video? oh well. emailed bimmercode and they believe the same and awaiting a response from mini about it. i believe we have a headunit similar to the BMW F48 models.
Please let me know. =)
#303
#305
Great post! Just read through 300+ responses and found that I am not alone with some issues. I am hoping that there might be an update in the 3-5 blink option? One of the main reasons I got the Bimmercode app was for that. I was able to code the fogs as brakes without issues. I tried the unlock doors when the car shuts off and that did not seem to take. Disappointing as every time I get out of the car, I forget to unlock the passenger side to get my back pack out.
One big question though. Did anyone ever have an issue with rain sensing wipers after coding anything? My auto wipers have stopped sensing. I tried everything. I know how to activate and cycle through on the stalk. Nothing is working. Wanted to pull the fuse and see if that did anything. I read the wipers had to be "reset" after a windshield replacement. Could some coding have affected this and cause them to need to be "reset"? Any help would be great. Raining a lot recently but not enough to have the wipers on all the time. One of my favorite features.
Thanks to everyone that has contributed to this post as I have learned quite a bit! Cheers!
One big question though. Did anyone ever have an issue with rain sensing wipers after coding anything? My auto wipers have stopped sensing. I tried everything. I know how to activate and cycle through on the stalk. Nothing is working. Wanted to pull the fuse and see if that did anything. I read the wipers had to be "reset" after a windshield replacement. Could some coding have affected this and cause them to need to be "reset"? Any help would be great. Raining a lot recently but not enough to have the wipers on all the time. One of my favorite features.
Thanks to everyone that has contributed to this post as I have learned quite a bit! Cheers!
#306
btw.. am now looking at other options to see if i need FSC unlock,etc. contacting several BMW coding places to see what they think. we do have the X1 headunit in our 2020 F60 JCWs (from what i'm gathering)
#307
Anyone have luck unlocking all four doors on engine off?
#308
First post!
I just purchased a 2016 F54 automatic and I've been able to program a bunch of different things onto the car (tach/gear in HUD, remember last drive setting, seat belt warnings, radio warning screen, etc), but I haven't been able to find a way to install the Sport transmission/launch control. I don't have (or plan on installing) paddle shifters, but I would like the ability to use launch control and have a little more aggressive shifting in S mode. Thanks for any info!
I just purchased a 2016 F54 automatic and I've been able to program a bunch of different things onto the car (tach/gear in HUD, remember last drive setting, seat belt warnings, radio warning screen, etc), but I haven't been able to find a way to install the Sport transmission/launch control. I don't have (or plan on installing) paddle shifters, but I would like the ability to use launch control and have a little more aggressive shifting in S mode. Thanks for any info!
#309
First post!
I just purchased a 2016 F54 automatic and I've been able to program a bunch of different things onto the car (tach/gear in HUD, remember last drive setting, seat belt warnings, radio warning screen, etc), but I haven't been able to find a way to install the Sport transmission/launch control. I don't have (or plan on installing) paddle shifters, but I would like the ability to use launch control and have a little more aggressive shifting in S mode. Thanks for any info!
I just purchased a 2016 F54 automatic and I've been able to program a bunch of different things onto the car (tach/gear in HUD, remember last drive setting, seat belt warnings, radio warning screen, etc), but I haven't been able to find a way to install the Sport transmission/launch control. I don't have (or plan on installing) paddle shifters, but I would like the ability to use launch control and have a little more aggressive shifting in S mode. Thanks for any info!
#310
Same here. I have it set to active, and while it unlocks the front doors, it does not unlock the rear seat doors. I ALWAYS yank the handle, then have to hit the unlock from the front door (too lazy to dig out the fob.) Was wondering if I need to go into expert for that or some such.
Anyone have luck unlocking all four doors on engine off?
Anyone have luck unlocking all four doors on engine off?
#312
Hi all
Can anyone confirm this adapter will definately work with android on my 2018my as the last 1 i bought didn't - https://www.amazon.co.uk/gp/product/...GJCU0C43&psc=1
Thanks
Can anyone confirm this adapter will definately work with android on my 2018my as the last 1 i bought didn't - https://www.amazon.co.uk/gp/product/...GJCU0C43&psc=1
Thanks
The following users liked this post:
robby71 (02-10-2020)
#316
https://bimmercode.app/
#317
If you mean code it, then you can do it via Bimmercode app and supported OBD2 scanner.
https://bimmercode.app/
https://bimmercode.app/
#318
https://f30.bimmerpost.com/forums/sh....php?t=1073764
The following users liked this post:
BamaMan44 (04-05-2020)
#319
This is to have the rear sidelights on when the car is running - DRLs just have the front lights on as standard but with this you can have the rears on all the time as well (same as when you turn the light switch on)
The following users liked this post:
Imperial (04-05-2020)
#320
I started using this app today. I have searched another thread, you can check if your settings are similar for your vehicle. I would say it should be somewhere in BDC
https://f30.bimmerpost.com/forums/sh....php?t=1073764
https://f30.bimmerpost.com/forums/sh....php?t=1073764
#321
So it just turns on taillights pretty much all the time? The confusing part was inner and outer.
#322
Robby71 called it: Toggle them to on- and the rear lights will be on when the car is running. your battery wouldn't last long if they were on all the time when its not running. be a bit lame eh and you would have to have a battery charger in your pocket all the time. your pants would look phat. not in a good way
Experiment with the inner and outer sections and ID what you prefer.
When i added the union flag lights the inner/outer correspond to the differing sections of the flag motif. experiment and clock what you like personally. Pics are always good so share what you find and pass the info to others
Experiment with the inner and outer sections and ID what you prefer.
When i added the union flag lights the inner/outer correspond to the differing sections of the flag motif. experiment and clock what you like personally. Pics are always good so share what you find and pass the info to others
Last edited by curlywurly; 04-10-2020 at 11:51 AM.
The following users liked this post:
Imperial (04-10-2020)
#323
#324
Back when I first got Bimmercode, and I was exploring the app, I stumbled upon this feature. However, I can't seem to find it again. Possibly, I was hallucinating. Possibly, I was looking at the wrong vehicle.
I remember seeing a feature that when you had the front windshield wiper 'on', and shifted into reverse, it would automatically turn the rear wiper 'on'.
Anyone else know about this?
I remember seeing a feature that when you had the front windshield wiper 'on', and shifted into reverse, it would automatically turn the rear wiper 'on'.
Anyone else know about this?
#325
Does anybody know the coding parameters for the side indicators (the turn signals in the A-panel)?
I recently installed a set of LED indicators that were not supposed to require any additional resistors or anything but they're occasionally hyperflashing on me. I'm curious if there's a bulb type setting I could change or turn off any hot/cold monitoring for them. No bulb errors other than the occasional hyperflash, which typically occurs the first few times I use either turn signal after starting the car. Curiously, the hazards always blink at normal speed.
If I can't resolve via coding, I'm going to have to look into returning these as this is a PITA to live with.
I recently installed a set of LED indicators that were not supposed to require any additional resistors or anything but they're occasionally hyperflashing on me. I'm curious if there's a bulb type setting I could change or turn off any hot/cold monitoring for them. No bulb errors other than the occasional hyperflash, which typically occurs the first few times I use either turn signal after starting the car. Curiously, the hazards always blink at normal speed.
If I can't resolve via coding, I'm going to have to look into returning these as this is a PITA to live with.