Drivetrain Project MSFITOY Part 2...
#201
Dynomax do one for an RV which is stainless but labeled as street in sound, unfortunatley its very very long but the hp rating is really good as it is straight thru with a 6 inch od.
I've always found the Flowmaster stuff very loud apart from they're big block 4 chamber mufflers.
The only other answer is to be wise and just get a turbo
I've always found the Flowmaster stuff very loud apart from they're big block 4 chamber mufflers.
The only other answer is to be wise and just get a turbo
#202
Dynomax do one for an RV which is stainless but labeled as street in sound, unfortunatley its very very long but the hp rating is really good as it is straight thru with a 6 inch od.
I've always found the Flowmaster stuff very loud apart from they're big block 4 chamber mufflers.
The only other answer is to be wise and just get a turbo
I've always found the Flowmaster stuff very loud apart from they're big block 4 chamber mufflers.
The only other answer is to be wise and just get a turbo
Hushpower II™
Jet Laminar Technology
Hushpower II mufflers utilize multiple layers of flow directors that work much like a jet engine by compressing the gases and increasing the velocity of gases as its entering the sound chamber. By using the laminar jet gas flow technology, sound frequencies are blended upon entering the sound chamber canceling out high frequencies as they exit creating a deep mellow tone that is pleasing to the ear.
Jet Laminar Technology
Hushpower II mufflers utilize multiple layers of flow directors that work much like a jet engine by compressing the gases and increasing the velocity of gases as its entering the sound chamber. By using the laminar jet gas flow technology, sound frequencies are blended upon entering the sound chamber canceling out high frequencies as they exit creating a deep mellow tone that is pleasing to the ear.
#203
#205
Some of my friends parked illegally in the streets but he never mentioned that...I shoulda taken a picture of his blacked out Charger with all the lights on while he was there...Hell, I shoulda taken up his offer for a ride...
#206
making me nuts
I am about to put a Magnaflow on my car and I am very concerned with the volume.... I have to drive the car to LDG next week and that is 10 hrs each way..... my GF is going with me....
I hope tha Magnaflow is an acceptable compromise......
seeing this thread and the spl being generated is ....making me nuts
the Milltek sounds great but is robbing me of 15 whp
I hope tha Magnaflow is an acceptable compromise......
seeing this thread and the spl being generated is ....making me nuts
the Milltek sounds great but is robbing me of 15 whp
#207
I am about to put a Magnaflow on my car and I am very concerned with the volume.... I have to drive the car to LDG next week and that is 10 hrs each way..... my GF is going with me....
I hope tha Magnaflow is an acceptable compromise......
seeing this thread and the spl being generated is ....making me nuts
the Milltek sounds great but is robbing me of 15 whp
I hope tha Magnaflow is an acceptable compromise......
seeing this thread and the spl being generated is ....making me nuts
the Milltek sounds great but is robbing me of 15 whp
#208
#211
this is my opinion but I think the Borla Race is raspy to begin with, then you put the header on which amplifies the sound. This is why WE settled on the Magnaflow as it has the best overall sound quality and performance with the least amount of volume for what you get.
There is a trade-off with everything and if you want high hp you have to settle for a little more noise
There is a trade-off with everything and if you want high hp you have to settle for a little more noise
#212
Fireballed Brian found a 3 inch cat that didn't effect the hp at allwhne they hit 500+whp, so you could throw one on as well if you need it to pass your local authority test.
We tested a free flowing sytem last week which was just as loud if not louder than yours and the one ball and guess who won
#214
Great party Friday night Sid! I had a feeling you had a thread going here on your new mod You wasted no time posting that video clip I sent ya!
Now aren't you glad I asked you to do this so I could hear it!
I was laughing at the fact that we could hear Lisa screaming STOP!! in the background
Thanks again for a fun time.
~Lina
I was laughing at the fact that we could hear Lisa screaming STOP!! in the background
Thanks again for a fun time.
~Lina
#215
Fireballed Brian found a 3 inch cat that didn't effect the hp at allwhne they hit 500+whp, so you could throw one on as well if you need it to pass your local authority test.
We tested a free flowing sytem last week which was just as loud if not louder than yours and the one ball and guess who won
We tested a free flowing sytem last week which was just as loud if not louder than yours and the one ball and guess who won
#217
Great party Friday night Sid! I had a feeling you had a thread going here on your new mod You wasted no time posting that video clip I sent ya!
Now aren't you glad I asked you to do this so I could hear it!
I was laughing at the fact that we could hear Lisa screaming STOP!! in the background
Thanks again for a fun time.
~Lina
Now aren't you glad I asked you to do this so I could hear it!
I was laughing at the fact that we could hear Lisa screaming STOP!! in the background
Thanks again for a fun time.
~Lina
#219
6th Gear
iTrader: (2)
Join Date: Feb 2005
Location: Miami, Florida
Posts: 3,291
Likes: 0
Received 0 Likes
on
0 Posts
I am about to put a Magnaflow on my car and I am very concerned with the volume.... I have to drive the car to LDG next week and that is 10 hrs each way..... my GF is going with me....
I hope tha Magnaflow is an acceptable compromise......
seeing this thread and the spl being generated is ....making me nuts
the Milltek sounds great but is robbing me of 15 whp
I hope tha Magnaflow is an acceptable compromise......
seeing this thread and the spl being generated is ....making me nuts
the Milltek sounds great but is robbing me of 15 whp
I heard Sid's new sytem via a cell phone call - sucker was loud BUT as Sid points out its only loud when your on it. Sounded great.
You can always stick some tube socks in the pipes for dates and the what not
#221
5th Gear
iTrader: (6)
Join Date: Nov 2006
Location: Redneck Kentucky
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Call Jan or head to www.revolutionmini.com for pricing. There are a few threads here posting gains with the head, you'll just have to search for them.
#222
Well I finally fixed everything...
1-found out that the V-clamp wasn't tight and that's why it was EXTREMELY LOUD!!!
2-it was still VERY LOUD after the clamp was tightened!!! Still has this "rasping ricer" like sound at WOT...
3-removed the 18" Magnaflow resonator and replaced with 18" Flowmaster Hushpower 2 and she's sounding extremely sweeeeet!!! The whole custom exhaust system is now welded from V-clamp to the tips...Loud but pleasingly so and very Italian...not resonating low low like a complete Magnaflow system but more mid-low...like I said...very Italian...Think Ferrari/Alfa...I like very much...
1-found out that the V-clamp wasn't tight and that's why it was EXTREMELY LOUD!!!
2-it was still VERY LOUD after the clamp was tightened!!! Still has this "rasping ricer" like sound at WOT...
3-removed the 18" Magnaflow resonator and replaced with 18" Flowmaster Hushpower 2 and she's sounding extremely sweeeeet!!! The whole custom exhaust system is now welded from V-clamp to the tips...Loud but pleasingly so and very Italian...not resonating low low like a complete Magnaflow system but more mid-low...like I said...very Italian...Think Ferrari/Alfa...I like very much...
#224
I applaud Sid for putting forth the effort to make his dreams reality. Not everyone dreams of Ferrari's just because the media said "it's expensive, thus you want one". I'd rather have something truly my own creation than anything off the shelf anyday.