Drivetrain Aftermarket Supercharger Intake duct
#54
07-13-2009, 07:07 PM
1st Gear
Join Date: Jul 2007
Location: Gaithersburg, MD
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
#55
07-16-2009, 10:40 PM
Join Date: Jul 2006
Location: Anacortes Washington
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
#57
07-22-2009, 02:40 AM
Join Date: Jan 2007
Location: Santa Cruz County Jail
Posts: 3,716
Likes: 0
Received 0 Likes
on
0 Posts
Expensive Gold Tape
Im pretty postive that heat soak is not a myth.
But hey if it is id love for you to submit a video of you pressing a pan to your face just after you cooked something in it.
I have the DDM, It will heat soak. Ill even make notation to prove it via scangauge.
You could always ask Big Howe about what hes data logged on his car.
He is very methodical when it comes to data logging.
And i would love to hear the AGS
But hey if it is id love for you to submit a video of you pressing a pan to your face just after you cooked something in it.
I have the DDM, It will heat soak. Ill even make notation to prove it via scangauge.
You could always ask Big Howe about what hes data logged on his car.
He is very methodical when it comes to data logging.
And i would love to hear the AGS
#58
07-22-2009, 11:30 AM
#60
08-06-2009, 08:13 PM
Dr.Steve & I were talking last night & the AGS v.4 is at the fabricator's as we speak. Both of our v.3 units are there getting some new CNC work done & they should be ready for install on our cars in <3 weeks. As far as what he's doing to our existing units it's just some small tweaks to improve supercharger fitment on an already solid design.
update??
#61
08-07-2009, 01:40 PM
Join Date: Jan 2007
Location: Santa Cruz County Jail
Posts: 3,716
Likes: 0
Received 0 Likes
on
0 Posts
#62
08-07-2009, 01:48 PM
Join Date: Aug 2006
Location: Who knows?
Posts: 1,127
Likes: 0
Received 0 Likes
on
0 Posts
#64
08-07-2009, 07:59 PM
#67
11-07-2009, 10:31 PM
#68
11-08-2009, 07:57 AM
i was digging around on the net looking for more info on this and found this.
---------------------------------------------------------------------
So this is the latest. Steve Tech at: http://www.customminishop.com/product/m7-ags.htm, is the vendor with the rights to the AGS. He is as we speak developing a V4 edition. The first one is at the manufacture being made. The CNC and machining is the easy part, the wiring harness is the hold up. In the older versions, the wiring harness had to be cut and spliced
Steve said he would not market a part like that. He is confident that something can be done. The V3 edition was $479. US. He is aiming at trying to get under that price. Unfortunately there will have to be a minimum amount made to make this worth his while. He is aiming at this next month, October, in getting the first one back from the manufacture. Once he gets a final and a price, he said he will need down payments to proceed. I hope this answers a few questions?
---------------------------------------------------------------------
so it sounds like it is in the works
---------------------------------------------------------------------
So this is the latest. Steve Tech at: http://www.customminishop.com/product/m7-ags.htm, is the vendor with the rights to the AGS. He is as we speak developing a V4 edition. The first one is at the manufacture being made. The CNC and machining is the easy part, the wiring harness is the hold up. In the older versions, the wiring harness had to be cut and spliced
Steve said he would not market a part like that. He is confident that something can be done. The V3 edition was $479. US. He is aiming at trying to get under that price. Unfortunately there will have to be a minimum amount made to make this worth his while. He is aiming at this next month, October, in getting the first one back from the manufacture. Once he gets a final and a price, he said he will need down payments to proceed. I hope this answers a few questions?---------------------------------------------------------------------
so it sounds like it is in the works
#70
11-08-2009, 11:08 AM
Join Date: Jan 2007
Location: Santa Cruz County Jail
Posts: 3,716
Likes: 0
Received 0 Likes
on
0 Posts
#71
11-08-2009, 06:59 PM
Wanderer
Join Date: Jul 2007
Location: St. Louis, Missouri
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
also very interested, have money to lay out as well. BUT, I'd really like to understand the benefits. Also, is the AGS just the duct? Or is it multiple parts? And, whats the wiring harness for? Thanks all, keep the info coming.
Last edited by MaxMini81; 11-08-2009 at 07:14 PM. Reason: Addition
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
Mini Mania
Drivetrain Products
0
08-21-2015 11:25 AM
iamcamkeenan
R50/R53 :: Hatch Talk (2002-2006)
3
08-10-2015 03:31 PM