Originally Posted by unclemeat

For awhile I've been running Scangauge Boost but only while MAP was displayed at the same time;

Well - Im getting the hang of this thing!!

Now display Boost pressure without having to display MAP at the same time:

TXD: 07DF010B
RXF: 0441850B0000
RXD: 2808
MTH: 00910064FFxx

Where FFxx will fit one of the following offsets:
14.0 -- FF74
14.1 -- FF73
14.2 -- FF72
14.3 -- FF71
14.4 -- FF70
14.5 -- FF6F
14.6 -- FF6E
14.7 -- FF6D
14.8 -- FF6C
14.9 -- FF6B
15.0 -- FF6A

Best way to guess your offset would be to first display MAP on the scangauage, and while the car is in neutral, press the start button but without the clutch pedal depressed. What this will do is initiate the engine electronics without starting the vehicle. Next, take whatever MAP number the scangauge displays and complete the MTH xGauge.

Save as BST

Start boostin without MAP concurrently displayed!

Originally Posted by richardsperry

Konly have to do it once. It's nonvolatile.

Originally Posted by bmwr606

send your gauge back for a software update

new software shows fuel pressure and oil pressure

Originally Posted by bmwr606

sorry ... oil pressure on N18 engine only