Drivetrain The Official ALTA AccessPORT Thread
#1805
#1808
#1810
#1811
Chris, any news on the new maps for the Auto. tranny folks? I seem to remember that you said that you would have something for us at the end of last week. However, I just jacked my AP into my PC and have not found any updates available. Have these new maps been released yet?
Thanks!
Thanks!
If you have an A/T with AP now and having concerns with the mapping, please just email Chris directly at Chris.Cone@ALTAPerformance.com
Explain exactly the concern you are having with the current map and he can tailor changes specific to you.
Thanks again!
#1812
#1814
A couple of questions:
1. Is there a way to get the AP to display the currently loaded map name?
2. Is there a way to read the entire map name displayed under the list of loaded maps? Mine is cut off to the length of the display, so version info on the end of the file name is not visible.
1. Is there a way to get the AP to display the currently loaded map name?
2. Is there a way to read the entire map name displayed under the list of loaded maps? Mine is cut off to the length of the display, so version info on the end of the file name is not visible.
#1815
#1818
#1819
Chris, any news on the new maps for the Auto. tranny folks? I seem to remember that you said that you would have something for us at the end of last week. However, I just jacked my AP into my PC and have not found any updates available. Have these new maps been released yet?
Thanks!
Thanks!
#1820
I don't really care about the P&B 'cause it's not real, but I'd really like to get the AP for my MCS, which I've had since last Thanksgiving (sounds like a long time putting it that way), and get "real" power. I know Bosch didn't make this encryption easy but I have faith that the smart folks at ALTA can break the code. I would just like a "progress" update like 50% there, or 20% there??
Adam, do you have an educated guess (SWAG) on when you'll bring the 2011 MCSa to market??
Thanks,
BZ
Adam, do you have an educated guess (SWAG) on when you'll bring the 2011 MCSa to market??
Thanks,
BZ
#1822
It's a coding error within the ECU. It doesn't seem to effect anything as I had it myself a couple of times.You can clear it with the AP but chances are it might return.
The ECU is seeing something it's not recognizing (new coding from the AP?) and it throws the P303e code. Did an update awhile back and haven't seen the code lately, anyway, Good luck.
The ECU is seeing something it's not recognizing (new coding from the AP?) and it throws the P303e code. Did an update awhile back and haven't seen the code lately, anyway, Good luck.
#1824
Thanks Maugre! It was showing the code when the stock flash was loaded, but went away when I re-loaded one of the custom tunes. Odd.
What is still showing is the little triangle with an exclamation point beside the trip miles on the tach. I thought that meant there was a code, but when I check the AP, no codes are reported. Am I misinterpreting what the exclamation means?
What is still showing is the little triangle with an exclamation point beside the trip miles on the tach. I thought that meant there was a code, but when I check the AP, no codes are reported. Am I misinterpreting what the exclamation means?
#1825
I notice little triangle at times too...
but can be as simple as...it needs gas. And the gas pump warning is showing if I cycle through the display. Add gas, no more triangle for me.
Thanks Maugre! It was showing the code when the stock flash was loaded, but went away when I re-loaded one of the custom tunes. Odd.
What is still showing is the little triangle with an exclamation point beside the trip miles on the tach. I thought that meant there was a code, but when I check the AP, no codes are reported. Am I misinterpreting what the exclamation means?
What is still showing is the little triangle with an exclamation point beside the trip miles on the tach. I thought that meant there was a code, but when I check the AP, no codes are reported. Am I misinterpreting what the exclamation means?