Drivetrain Aquamist HFS Methanol Injection Systems
#251
4th Gear
iTrader: (1)
Join Date: May 2012
Location: NC
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a Snow Performance Stage II Kit, but it's just the Tank, Pump and Nozzle holder. All other hardware is from Devils Own. I would need the plug when I go to the Dealership for Service. Don't want to just throw it in their face that I'm running a Meth Kit...
#254
It was only for oil changes. I don't know what they would do if something was "wrong", but the Technicians have all been cool and I do tip them when I pickup the car.
#255
I'm considering putting my meth pump in a cool spot in the engine bay and leaving the tank in the back of the GP2. Any issues I should consider?
Thanks
Thanks
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
#256
Most pumps are not weather proof (only resistant) so take that into consideration.
BTW, who did your ceramic coatings on your DP? I'm thinking about getting a high flow 100 cell cat and having it coated.
#257
Just installed this kit. Everything seems to be working properly. Right now, cleaning my windshield with only the purest water. I would like to set up fail safe being meth will be an integral component of the map (22.5 psi) I will be running. Anyone set this up yet? From what I see: 1. cut the wastegate wire from ecu and splice the brown and white wire from gray harness. 2. Calibrate flow bars on gauge 3. Calibrate wl and wh dials on gauge. 4. Set jumper in cel dr1 I think that's it. Sounds simple enough.. I guess. Any additional thoughts?
#258
I will take a pic tomorrow. Away from the mini tonight. Just make sure the brown wire goes to wastegate and the white goes to the ecu.
#260
Here's a pic before I wire tied and taped it. You can also use a posi tap to make the connection.
#262
#263
Going to move my jet further down the pipe (Closer to the intercooler) so it has more time to cool down the intake before it hits the sensor. I originally was going to put the blanking plug to where the original hole was but now I am thinking of just running a twin nozzle set up since I will have 2 holes. Do you guys see any problems running 2 nozzles on the same pipe? I am on the stock turbo running 18-19psi so temps are something i really need to combat. I will give it a go since i will have 2 holes anyway. What do you guys think? The more meth the better? Lol
#265
No more e85 then ?
Just finished up my aquamist install . Might sound like a stupid question , but now that I'm running this system ( 80/20 mix btw) do I need not bother using my usual 2.5 gallons of e85 per tankful anymore ??? Didn't know if there would no longer be a benefit or if I should still run that mix regardless .
Thanks in advance for your answers
Thanks in advance for your answers
#266
Just finished up my aquamist install . Might sound like a stupid question , but now that I'm running this system ( 80/20 mix btw) do I need not bother using my usual 2.5 gallons of e85 per tankful anymore ??? Didn't know if there would no longer be a benefit or if I should still run that mix regardless . Thanks in advance for your answers
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
#267
Just finished up my aquamist install . Might sound like a stupid question , but now that I'm running this system ( 80/20 mix btw) do I need not bother using my usual 2.5 gallons of e85 per tankful anymore ??? Didn't know if there would no longer be a benefit or if I should still run that mix regardless .
Thanks in advance for your answers
Thanks in advance for your answers
#268
#269
Race gas would be ideal, but not at $9-13 a gallon. E85 is great, but only can be used at 30% or less. You are one of the lucky ones, that can get E85 so easy. Can't wait to get my lazy butt to install my meth kit
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
#270
#271
Let us know how the 1.0mm jet works out. I was thinking of doing 1 big single jet or dual small jets. Not sure
#272
3rd Gear
iTrader: (1)
Join Date: Oct 2012
Location: San Francisco, CA
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
I had been doing it by weight on a scale. It was suggested over on the aquamist forums
http://www.aquamist.co.uk/vbulletin/
http://www.aquamist.co.uk/vbulletin/