Drivetrain Aquamist HFS Methanol Injection Systems
#151
Let's all try and remember that the forums should be for helping fellow mini owners, rather than picking them apart for the questions they ask. Nobody is perfect and in my opinion more people should be willing to help rather than scrutinize them for asking questions, but it seems to be the opposite. That is not my opinion based on the interactions solely in only this thread but many other.
#152
#153
take a breather, step back, and go over the installation manual from the beginning. It's easy to get your wires crossed(pun intended). Make sure every thing is connected as per instructions and all settings are correct. Then if you still have a problem then call manufacturer for help.
#154
Well, I finally put the jet in! I had been driving around for a week or so with the jet under the windshield. It was a hot day here in Texas with ambient temps in the high 90's and I had intake temps hovering at or even into the triple digits at some point. When the meth hits, it was dropping the intake temps by 5 & 10 degree increments quickly. It dropped into the 80's before I let off the gas. This is going to be nice this summer.
#155
Well, I finally put the jet in! I had been driving around for a week or so with the jet under the windshield. It was a hot day here in Texas with ambient temps in the high 90's and I had intake temps hovering at or even into the triple digits at some point. When the meth hits, it was dropping the intake temps by 5 & 10 degree increments quickly. It dropped into the 80's before I let off the gas. This is going to be nice this summer.
#156
Lol. I was done with the install but wanted to see when the jet sprayed. I'm still amazed how with my current setting with thres a little before noon on the dial the system does not spray too often. I know I can adjust it but I think it is where it needs to be after speaking with Jeff. Slightly biased towards boost.
#158
#159
Lol. I was done with the install but wanted to see when the jet sprayed. I'm still amazed how with my current setting with thres a little before noon on the dial the system does not spray too often. I know I can adjust it but I think it is where it needs to be after speaking with Jeff. Slightly biased towards boost.
Mine doesn't spray all that often either. If I try I can drive to work and NOT have it spray at all. Typically it comes on around 9 psi. I'm averaging about 1/2 gallon of methanol every 500 miles. I guess I need to start "driving" the car.
I'm too chicken to do this. I'm still at 50% on the dial. Other people on here say that 80% is about ideal.
#161
#162
I did the something with it spraying on the windshield for about a week. I was so nervous when I first installed the jet. Mine doesn't spray all that often either. If I try I can drive to work and NOT have it spray at all. Typically it comes on around 9 psi. I'm averaging about 1/2 gallon of methanol every 500 miles. I guess I need to start "driving" the car. I'm too chicken to do this. I'm still at 50% on the dial. Other people on here say that 80% is about ideal.
#163
I did the something with it spraying on the windshield for about a week. I was so nervous when I first installed the jet. Mine doesn't spray all that often either. If I try I can drive to work and NOT have it spray at all. Typically it comes on around 9 psi. I'm averaging about 1/2 gallon of methanol every 500 miles. I guess I need to start "driving" the car. I'm too chicken to do this. I'm still at 50% on the dial. Other people on here say that 80% is about ideal.
So do it!
#164
I've go him beat. I've read the instructins several times, looked at everything in the boxes (a couple of times) and put everything in the car twice. Just havent installed anything yet. Hoping to get really started tomorrow. I can't finish until I get a none colorblind to help with the wires at the ECM
What mix are you guys running? I was planing on starting with 50/50 VP M1 and water.
What mix are you guys running? I was planing on starting with 50/50 VP M1 and water.
#165
I've go him beat. I've read the instructins several times, looked at everything in the boxes (a couple of times) and put everything in the car twice. Just havent installed anything yet. Hoping to get really started tomorrow. I can't finish until I get a none colorblind to help with the wires at the ECM
A lot of people (on other forums) believe that 50/50 is to much water for the ignition system. IIRC Jeff recommends not more that 20% water (don't quote me on that though).
#166
#167
Turning the JB+ isn't something to be nervous about. When I was troubleshooting mine with Terry. He made me turn it up to 100% on pump gas for a while. You will boost more. Just as long as you don't pass 18-19psi you'll be good. I was afraid turning it up and told him I didn't wanna blow up my car or misfire or anything. And he said the dial is just a system they came up with, no particular stages are really defined. Just the sensitivity of the controller is increased a bit.
So do it!
So do it!
#168
Has anyone else found themselves getting a little spray from the jet upon start-up? Spoke to Jeff about this and he stated this is common when the mode is set to IDC with our engines. He said we should never spray while in vacuum. He had me switch to MPS and now I am adjusting to the appropriate boost level to kick in.
Last edited by wzabrouski; 05-31-2014 at 12:50 PM.
#170
So I bumped the JB from 12 to 2 and when going high into the RPM band I was getting what appeared to be a misfire. Lowered the JB back to 12, no issue. The best way to describe the sound was batta, batta, bat, batta... lol. The question is was it a result of too little or too much meth and why would the increase in the JB have this result.