Drivetrain Official ALTA Q&A thread!
#826
#827
djdport66: Yes it does! No problem and a positive HP gain as well! Let me know if I can help further.
edulbdie: No significant difference other than color, minor air box changes, filter change and the lack of warranty would be it. Thanks for asking!
Thanks again folks!
edulbdie: No significant difference other than color, minor air box changes, filter change and the lack of warranty would be it. Thanks for asking!
Thanks again folks!
Thanks Guys, It's on my shopping list! DJD
#829
Cold Air Intake Version 2.0
Just installed CAI Version 2.0 ( AMP-INT-200). Closing the hood causes an interferance problem with the hood on the 2006 manual trans. I did not use
an Air Box Top. What do I do ? Cut the supplied 3 forward side trim seal
or the hood insulation or both?How much/ how far ?
Thanks Bill
an Air Box Top. What do I do ? Cut the supplied 3 forward side trim seal
or the hood insulation or both?How much/ how far ?
Thanks Bill
#830
trackertracker: Thank you for your phone call today. As I mentioned that has not ever been a problem before, and I am anxious to help you resolve the conflict with your vehicle. If you were unable to resolve it after our conversation PLEASE call me back later today. In the office ready to help! (DO NOT CUT ANYTHING!)
Thanks again NAM! Hope everyone had a great weekend!
Thanks again NAM! Hope everyone had a great weekend!
Last edited by ALTAPerformance; 03-05-2007 at 02:01 PM. Reason: typos
#831
Per our discussion I reviewed the lower box mounting and all was in order.
The hood insulation showed the indentation of the Alta Box. I removed the Alta three sided insulation strip ,which allows the hood to close without problem. I believe the top edge of the box seals against the hood but as yet haven't figured out how to prove it ,
Thanks for your prompt help.
Bill
The hood insulation showed the indentation of the Alta Box. I removed the Alta three sided insulation strip ,which allows the hood to close without problem. I believe the top edge of the box seals against the hood but as yet haven't figured out how to prove it ,
Thanks for your prompt help.
Bill
#833
#834
#835
AMVIV FYI: https://www.northamericanmotoring.co...ad.php?t=94352
Not only to we have the hottest parts in Vegas, but now we have the hottest deals! Sin City is going to sizzle with the heat eminating from our trailer and show cars! Come and check it out!
Call or e-mail me with any questions or concerns! Happy to help.
Not only to we have the hottest parts in Vegas, but now we have the hottest deals! Sin City is going to sizzle with the heat eminating from our trailer and show cars! Come and check it out!
Call or e-mail me with any questions or concerns! Happy to help.
#836
Alta CAI modification
Since it takes forever for me to post pictures ----if anyone wants to see the Alta CAI with www.cdoc.com gold reflective foil film install , go to
www.sunshineminis.org forum;Mini Modifications;Alta CAI Insulation Install;
by "Bully" ( I hope this doesn't break any rules by showing another web site ?? )
www.sunshineminis.org forum;Mini Modifications;Alta CAI Insulation Install;
by "Bully" ( I hope this doesn't break any rules by showing another web site ?? )
#842
Mr. Alta,
I have the dreaded mushrooming of the strut towers. I want to install the M7 strut brace because the way it is designed it flattens the strut towers and reinforces it plus the benefit of a strut brace. The thing is how would it interfere with your CAI I have installed in my car sense it would go over the top of it? Would I have to get your "box top" to reseal it? I love your CAI and I am not going to get rid of it! Worse case scenario is I will just get the strut reinforcement plates. Thank you.
I have the dreaded mushrooming of the strut towers. I want to install the M7 strut brace because the way it is designed it flattens the strut towers and reinforces it plus the benefit of a strut brace. The thing is how would it interfere with your CAI I have installed in my car sense it would go over the top of it? Would I have to get your "box top" to reseal it? I love your CAI and I am not going to get rid of it! Worse case scenario is I will just get the strut reinforcement plates. Thank you.
#843
#844
trackertracker: Thanks for the photos. Interesting look! Any gains?
tavis1: The M7 brace will work with our air box, but you may need to relieve a bit of metal underneath the strut brace to clear the air box. Some clients will upgrade to the air box top at the same time to clean up the installation. Let us know how we can help further! Thanks again!
See everyone at AMVIV!
tavis1: The M7 brace will work with our air box, but you may need to relieve a bit of metal underneath the strut brace to clear the air box. Some clients will upgrade to the air box top at the same time to clean up the installation. Let us know how we can help further! Thanks again!
See everyone at AMVIV!
#845
I have not done any temperature measurements. The car isn't broken in yet,
Since the ambient temp/speed would change so much , I don't think that I could have gotten a apples to apples comparision. I am just going on-----it
seemed to be a good idea at the time and most of the Daytona Rolex cars
used the stuff ( thier R&D budget isonly slightly larger than mine )
Since the ambient temp/speed would change so much , I don't think that I could have gotten a apples to apples comparision. I am just going on-----it
seemed to be a good idea at the time and most of the Daytona Rolex cars
used the stuff ( thier R&D budget isonly slightly larger than mine )
#847
trackertracker: Thanks for the photos. Interesting look! Any gains?
tavis1: The M7 brace will work with our air box, but you may need to relieve a bit of metal underneath the strut brace to clear the air box. Some clients will upgrade to the air box top at the same time to clean up the installation. Let us know how we can help further! Thanks again!
See everyone at AMVIV!
tavis1: The M7 brace will work with our air box, but you may need to relieve a bit of metal underneath the strut brace to clear the air box. Some clients will upgrade to the air box top at the same time to clean up the installation. Let us know how we can help further! Thanks again!
See everyone at AMVIV!
#848
Hey NAM folks! Check us out on White Roof Radio
http://www.whiteroofradio.com/woofcast-140/
ENJOY!
Thanks again for choosing ALTA Performance Products!
http://www.whiteroofradio.com/woofcast-140/
ENJOY!
Thanks again for choosing ALTA Performance Products!
#849
Also, check out the new info about the water/meth injection on a 15% MCS. We may be releasing more info with a 17-21% soon too!
https://www.northamericanmotoring.co...ad.php?t=95030
Yee ha!
See you at AMVIV!
https://www.northamericanmotoring.co...ad.php?t=95030
Yee ha!
See you at AMVIV!