F54 Help with Codes from BlueDriver OBD Scan
#1
Join Date: Aug 2022
Location: Lower Merion Township, PA
Posts: 8
Received 0 Likes
on
0 Posts
Help with Codes from BlueDriver OBD Scan
Hi all,
I’ll be picking up BIMMERCODE, however, in the meantime, I hoping those much more knowledgeable than I with codes can provide some feedback.
I ran a full system module scan on my Cooper S ALL4 Clubman and receive these codes. I can’t find any information about them. I could should use some guidance about how to research these on my own without bothering others, but until then, I hoping the experts on here can shed some light for me. Here is a copy of the report. I’m most concerned about the Gearbox codes.So sorry for the enormous graphic!
Any and al help is greatly appreciated! ‘
TIA
TF
I’ll be picking up BIMMERCODE, however, in the meantime, I hoping those much more knowledgeable than I with codes can provide some feedback.
I ran a full system module scan on my Cooper S ALL4 Clubman and receive these codes. I can’t find any information about them. I could should use some guidance about how to research these on my own without bothering others, but until then, I hoping the experts on here can shed some light for me. Here is a copy of the report. I’m most concerned about the Gearbox codes.So sorry for the enormous graphic!
Any and al help is greatly appreciated! ‘
TIA
TF
Last edited by TurgidFlux; 11-13-2022 at 07:21 AM. Reason: Typos
#2
This site can help:
https://bmwfault.codes
If the car is driving fine, my suggestion would be the clear them all and see if any return.
https://bmwfault.codes
If the car is driving fine, my suggestion would be the clear them all and see if any return.
The following users liked this post:
TurgidFlux (11-14-2022)
#3
Join Date: Aug 2022
Location: Lower Merion Township, PA
Posts: 8
Received 0 Likes
on
0 Posts
This site can help:
https://bmwfault.codes
If the car is driving fine, my suggestion would be the clear them all and see if any return.
https://bmwfault.codes
If the car is driving fine, my suggestion would be the clear them all and see if any return.
I’ll also clear them and see if they surface again.
Thank you!
Keith
#4
Join Date: Aug 2022
Location: Lower Merion Township, PA
Posts: 8
Received 0 Likes
on
0 Posts
Hey mjarenka,
Thank you! That site is great! I quickly figured they were hex codes, punched them in and up they popped. I need to go through each tomorrow and collectively review them to see if I can determine what they mean. The gearbox codes appear to be related to a bus communication issue, either the transmitter or receiver.
As you suggested, I’ll clear everything and drive a while and review them then work on analysis.
Thank you again for your help!
Thank you! That site is great! I quickly figured they were hex codes, punched them in and up they popped. I need to go through each tomorrow and collectively review them to see if I can determine what they mean. The gearbox codes appear to be related to a bus communication issue, either the transmitter or receiver.
As you suggested, I’ll clear everything and drive a while and review them then work on analysis.
Thank you again for your help!
Last edited by TurgidFlux; 11-14-2022 at 04:10 PM. Reason: Added mjarenka to the message as I did a quick reply.
Thread
Thread Starter
Forum
Replies
Last Post