F55/F56 The New Key Fob for the F56
#428
#432
Just ordered an orange one to match my Volcanic F56 I picked up yesterday. I uploaded a 1920x1080 png file of the Mini logo (http://www.carlogos.org/logo/Mini-lo...-1920x1080.png), scaled to 120% and i'll report back with how it looks! Looked super official on the preview!
#435
Another storefront has a lot more designs available - worth considering as well!
http://www.shapeways.com/shops/tp-1
http://www.shapeways.com/shops/tp-1
A side note, the compass version looks extremely uncomfortable. I can't imagine putting that in my pocket.
Thanks
#437
Some of those designs are....How would you....in your pocket?...
#439
just went on the shapeways site .....i see the V3
https://www.shapeways.com/product/WK...ionId=59665577
and also the V2
https://www.shapeways.com/product/L9...ionId=59615160
those were the only ones designated as designed by devries ......no V1 ...but what is the difference, without me reading all 18 pages of this thread? can i assume that V3 being the latest version is the one to buy?
https://www.shapeways.com/product/WK...ionId=59665577
and also the V2
https://www.shapeways.com/product/L9...ionId=59615160
those were the only ones designated as designed by devries ......no V1 ...but what is the difference, without me reading all 18 pages of this thread? can i assume that V3 being the latest version is the one to buy?
#440
ah ... and here is version 1
https://www.shapeways.com/product/L9...ign=webdynamic
they all look alike ..... so which is the one to buy: v1 v2 or v3 ?
https://www.shapeways.com/product/L9...ign=webdynamic
they all look alike ..... so which is the one to buy: v1 v2 or v3 ?
#442
ah ... and here is version 1
https://www.shapeways.com/product/L9...ign=webdynamic
they all look alike ..... so which is the one to buy: v1 v2 or v3 ?
https://www.shapeways.com/product/L9...ign=webdynamic
they all look alike ..... so which is the one to buy: v1 v2 or v3 ?
#445
just installed my V3 in blue ...NICE .... ....fits perfectly ...the hardest part
was taking off the darn MINI plate of the FOB ...was VERY difficult and took a LOT of pressure as it was really resisting and did chip a little just where you stick in the end of the key ( i had to use a screwdriver to go in further ...but just a tiny chip) .....thanks Devries
was taking off the darn MINI plate of the FOB ...was VERY difficult and took a LOT of pressure as it was really resisting and did chip a little just where you stick in the end of the key ( i had to use a screwdriver to go in further ...but just a tiny chip) .....thanks Devries
#446
#447
Join Date: Aug 2016
Location: California Native still livin' in LaLa Land
Posts: 2,163
Received 510 Likes
on
384 Posts
The following users liked this post:
zagman (07-28-2017)
#450
Best Fob Solution
Works great - cheaper than buying any knock-off, smaller, too.
"Doesn't look as good"? C'mon - nobody ever sees it, it's in my POCKET !!
-Oly