F55/F56 Mini coding/programming
#927
I can confirm that this coding works for the:
JCW Tach and Gear Selection in HUD
HU_NBT > EXPERT MODE > HUD_SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
Code
Then
KOMBI > EXPERT MODE > FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
Code
So Cool!
I had to cycle the ignition twice to get rid of the error message.
#928
#929
#930
The logical behavior would be to always show NAV directions (if NAV directions are activated on HUD settings) no matter if the Sports displays - JCW tacho is activated or not in that settings.
#931
#933
Hopefully this is the proper place for posting this. Does anyone know the codes to keep the "Angel Eye Halo's" on with the fog lights when placed in the Parking Lights toggle position. I can code the fog lights on with DRL's so that the full fog light is lit up in parking light position. However, after my ECU got reset by the factory, I cannot seem to get the Halo to stay on with the fog lights. Example of how my car used to be below
#934
Just an update for everyone, I have updated the first post in the "Union Jack" thread to cover physical install, coding removal of the errors, and changes to both the US lights for correctly working the turn signal during braking and the EU lights for correctly working brake force display.
The following users liked this post:
curlywurly (04-05-2019)
#935
Looking for some coding guidance to turn off the welcome gongs/chime, what would be the code? I just hate that bee-bop bee-bop sound every time the car started. What is it under?
Also, I tried to do the accoustic confirmation upon locking/unlocking the car. The checkbox succesfully appeared on the idrive system but it does not do anything. What gives? The 2015MCS simply does not have the small beep speaker?
Succesfully added the JCW tach, roll up all windows by holding the lock button.
Also, I tried to do the accoustic confirmation upon locking/unlocking the car. The checkbox succesfully appeared on the idrive system but it does not do anything. What gives? The 2015MCS simply does not have the small beep speaker?
Succesfully added the JCW tach, roll up all windows by holding the lock button.
#939
#941
Same here.. Although you can code the car to sound the horn when you lock the doors while the engine is running. I hope there is a way to code the same when the engine is off.
#942
Bimmercode could not access my head unit to turn off the legal disclaimers that come up every start-up. I'm bummed.
I have a 2019 JCW 3 dr without the navigation. So it's a 6.5 display with no touchscreen. But it has Mini Connect and everything else Anyone had any luck with another coder, Esys?
I have a 2019 JCW 3 dr without the navigation. So it's a 6.5 display with no touchscreen. But it has Mini Connect and everything else Anyone had any luck with another coder, Esys?
#943
Bimmercode could not access my head unit to turn off the legal disclaimers that come up every start-up. I'm bummed.
I have a 2019 JCW 3 dr without the navigation. So it's a 6.5 display with no touchscreen. But it has Mini Connect and everything else Anyone had any luck with another coder, Esys?
I have a 2019 JCW 3 dr without the navigation. So it's a 6.5 display with no touchscreen. But it has Mini Connect and everything else Anyone had any luck with another coder, Esys?
#944
Sansho, was your 2018 the non-touch screen 6.5" display? It does appear the 8.8 Navigation/Touchscreen in the 2019 definitely is supported.
#945
He told me the same thing too. We need more people to request this for the 6.5” display.
The following users liked this post:
Warren2185 (04-24-2019)
#946
#948
Hello I have a 2015 cooper s with the factory jcw package on it but want to remove fog lights to convert it to jcw look. After I do this I would get error codes with the removal of the fog lights and also the sidelights would need to be changed from the fog lights to the headlights. Thank you very much guys and hope someone can help
#949
I recently used Bimmercode to enable the rear fog lights in my 2019 F56 S. They work fine, but since then, I regularly get warnings that my rear brake lights and rear turn signals are malfunctioning (they aren’t). Sometimes it goes away if I restart the car, and sometimes ithe warning stays for a few days and then goes away. Any ideas wha might be causing this?
#950
I recently used Bimmercode to enable the rear fog lights in my 2019 F56 S. They work fine, but since then, I regularly get warnings that my rear brake lights and rear turn signals are malfunctioning (they aren’t). Sometimes it goes away if I restart the car, and sometimes ithe warning stays for a few days and then goes away. Any ideas wha might be causing this?