F55/F56 Mini coding/programming
#976
So,
Option 1: allways but then the navi wont show at all.
Option 2: When in sport mode (this option is i think when you use bimmer code to leave it in sport mode all the time)
Option 3: When you select sport mode with the selector switch.
I can change the mode in the HUD option list.
#977
Hola amigo, en primer lugar espero que todos estén bien.
Estoy tratando de codificar algunas cosas en mi mini cooper f56 sin éxito y me preguntaba si podrían ayudarme en caso de que esté haciendo algo mal ... es un mini cooper s f56 2014 192
Primero trato de reducir el tiempo de advertencia de el cinturón de seguridad de 90 segundos de fábrica a 5 segundos, use el siguiente código sin éxito:
Para reducir el tiempo de pitido del cinturón de seguridad, use:
ACSM2
GWF_SBR_WARNDAUDER = 05
Lo siguiente que hice fue codificar la pantalla del concentrador jcw y me aparece el logotipo pero los símbolos blancos a la izquierda y a la derecha no aparecen ni en modo deportivo especialmente desconectado y el deporte cambia a la izquierda.
Uso:
Nbt
HUD_SPORTANZEIGE_ENABLE
HUD_SPORTANZEIGE_FES_ENABLE
HUD_SPORTANZEIGE_MS_GASSE_ENABLE
Kombi
HUD_SPORTANZEIGE_ENABLE
HUD_SPORTANZEIGE_FES_ENABLE
HUD_SPORTANZEIGE_MS_GASSE_ENABLE
HUD_FAHRSTUFE_ENABLE
Creo que se actualizó en 2017, pero no puedo garantizarlo.
Gracias de antemano por toda la ayuda brindada y mantente saludable sonrisa
Estoy tratando de codificar algunas cosas en mi mini cooper f56 sin éxito y me preguntaba si podrían ayudarme en caso de que esté haciendo algo mal ... es un mini cooper s f56 2014 192
Primero trato de reducir el tiempo de advertencia de el cinturón de seguridad de 90 segundos de fábrica a 5 segundos, use el siguiente código sin éxito:
Para reducir el tiempo de pitido del cinturón de seguridad, use:
ACSM2
GWF_SBR_WARNDAUDER = 05
Lo siguiente que hice fue codificar la pantalla del concentrador jcw y me aparece el logotipo pero los símbolos blancos a la izquierda y a la derecha no aparecen ni en modo deportivo especialmente desconectado y el deporte cambia a la izquierda.
Uso:
Nbt
HUD_SPORTANZEIGE_ENABLE
HUD_SPORTANZEIGE_FES_ENABLE
HUD_SPORTANZEIGE_MS_GASSE_ENABLE
Kombi
HUD_SPORTANZEIGE_ENABLE
HUD_SPORTANZEIGE_FES_ENABLE
HUD_SPORTANZEIGE_MS_GASSE_ENABLE
HUD_FAHRSTUFE_ENABLE
Creo que se actualizó en 2017, pero no puedo garantizarlo.
Gracias de antemano por toda la ayuda brindada y mantente saludable sonrisa
Last edited by user 4744737; 06-16-2020 at 04:59 AM.
#978
Hey all.
New 2020 F56 SE here and I'm looking to upgrade to the 8.8" screen. Chu Shao gave me some lines to tweak, but it looks like I need to find a newer set of the PSDZData (hopefully a 2020 full version).
Can anyone point me in the right direction for the full download?
Happy Motoring
New 2020 F56 SE here and I'm looking to upgrade to the 8.8" screen. Chu Shao gave me some lines to tweak, but it looks like I need to find a newer set of the PSDZData (hopefully a 2020 full version).
Can anyone point me in the right direction for the full download?
Happy Motoring
#979
Hey all.
New 2020 F56 SE here and I'm looking to upgrade to the 8.8" screen. Chu Shao gave me some lines to tweak, but it looks like I need to find a newer set of the PSDZData (hopefully a 2020 full version).
Can anyone point me in the right direction for the full download?
Happy Motoring
New 2020 F56 SE here and I'm looking to upgrade to the 8.8" screen. Chu Shao gave me some lines to tweak, but it looks like I need to find a newer set of the PSDZData (hopefully a 2020 full version).
Can anyone point me in the right direction for the full download?
Happy Motoring
The following users liked this post:
jamez (06-16-2020)
#982
FB is lousy for sharing albums but I have documented the process for the 8.8" screen retrofit on my 2020 SE. Thanks everyone for their help!
https://www.facebook.com/R53JCW/photos_albums
https://www.facebook.com/R53JCW/photos_albums
The following 2 users liked this post by jamez:
scotty_r56s (10-28-2020),
TkPk (08-17-2020)
#983
Just for you guys, here's shots from a spreadsheet I made with all the coding parameters I've scrounged up from various BMW/MINI coding sources, along with my notes. Some codes were for BMW so some of them won't work (or didn't work for me) and some we can get working someday (turn signals in HUD please!).
I haven't coded in months so some info may be outdated or I never updated the sheet.
I haven't coded in months so some info may be outdated or I never updated the sheet.
#985
Funny, my 2019 F57 came with the UJ lights from the factory and I’ve been trying to figure out how to separate the brake/turn signal functions. Curious to see what you might learn, as it might help me reverse engineer the coding changes needed to separate the functions.
#986
Simple solution... Swap cars!!!
#987
#988
FB is lousy for sharing albums but I have documented the process for the 8.8" screen retrofit on my 2020 SE. Thanks everyone for their help!
https://www.facebook.com/R53JCW/photos_albums
https://www.facebook.com/R53JCW/photos_albums
#989
OEM Euro/world rear light clusters (amber indicators, red brake) they dont
OEM NA rear (red to both, single LED sectionL they do
non OEM: whole can of worms
Theres a very long programming thread for union jack lights - both here and on the British centric F56 blog.
The following users liked this post:
Bob N Sheila Murphy (02-07-2021)
#990
Hi Everyone
has anyone found the coding to not have full lights on at night in the 0 mode on the light switch?
I think it's possible as i've seen the line item on some websites, but i haven't been able to find it by searching through expert mode or anywhere online
"turn off Lights on the Off / 0 Position (Select 2018 and newer vehicles"
thanks!
has anyone found the coding to not have full lights on at night in the 0 mode on the light switch?
I think it's possible as i've seen the line item on some websites, but i haven't been able to find it by searching through expert mode or anywhere online
"turn off Lights on the Off / 0 Position (Select 2018 and newer vehicles"
thanks!
#992
#993
#994
Set FLC_AKTIV to freigeschaltet_in_Stellung_A using expert mode for the Body Domain Controller
#995
Not trying to get satellite radio. Seems more work than it's worth to me; I'm used to Spotify, Beats, Pandora, and Songza. No need for Satellite.
No, I just want to code the following snippets that I've found around the internet, but it's not letting me get that far:
No, I just want to code the following snippets that I've found around the internet, but it's not letting me get that far:
Code:
BDC Unlock all doors with vehicle shutoff (only works when vehicle settings "lock all doors upon drive" has been turned on) BDC 3040 - VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK = Set Aktiv or 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK = aktiv 01 Turn off radio and nav system if equiped when drivers door is opened BDC 3020 - TCM_LOGIC_R_OFF_DOOR = Set Aktiv Increase Angel Eyes Brightness to 100% 3062 MAPPING_STANDL_V_L_PWM_LEVEL_1 = 100% 3062 MAPPING_STANDL_V_R_PWM_LEVEL_1 = 100% 3062 MAPPING_PARKL_V_L_PWM_1_LEFT = 100% 3062 MAPPING_PARKL_V_L_PWM_2_RIGHT = 100% Turn on door handle lights when reverse is selected 3070 OVT_BEI_REUCKFAHRLICHT = Set Aktiv Fog lights can remain on with high beams 3068 NSW_AUS_BEI_FL = Set Nicht Aktiv (remain on with high beams) Close windows, sunroof & mirror from key fob: 3056 KOMFORTSCHLIESSUNG_FB = aktiv 00 (Comfort Access ONLY) 3056 KOMFORT_SCHLIESSEN WERTE = 00 (Mirror Fold Delay = 0 sec delay) 3110 ASP_BEIKLAPPEN = aktiv (werte=01) 3110 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = (werte=01) 3110 ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN = (werte=01) Turn on Brake Force Flashing with Hard Braking: 3068 ESS_AKTIVIERBARER_AUSGANG = bremsclicht blinkend Turn on Fog Lights with Welcome Lights: 3063 MAPPING_NEBELSCHW_L_PART_OF_WL = hard on 3063 MAPPING_NEBELSCHW_R_PART_OF_WL = hard on Enable Active Sound Design Configuration Menu 3000 ASD_CONFIGURATION set to: aktiv 3000 ASD_SOUND_4 set to: aktiv Enable Sport Displays (Power/Torque) & Unit Changing (kW/nM) 3000 EFF_DYN_SPORT_CID set to: aktiv 3000 EFF_DYN_SPORT_UNIT set to: aktiv Enable Turn Signals in HUD 3001 HUD_TURNSIGNAL set to: aktiv Navi Trip-Import 3000 NAVI_TRIP_IMPORT set to: aktiv Auto Start/Stop Remember Last Setting: 3023 TCM_MSA_MEMORY = aktiv 01 HU_NBT: Play video on navigation screen while vehicle is in motion 3000 - SPEEDLOCK_X_KMH_MAX = (Werte Value = FF) 3000 - SPEEDLOCK_X_KMH_MIN = (Werte Value = FF) 3000 - VIDEO_HANDBRAKE = Set Nicht Aktiv 3000 - VIDEO_FRONT_LOCKED = Set Nicht Aktiv 3000 - VIDEO_SPEEDLOCK_CONDITION = Set none Enable Video Files from USB 3000 ENT_CODEC_XVID set to: aktiv 3000 ENT_CODEC_XVCD set to: aktiv 3000 API_USB_VIDEO set to: both Remove the iDrive system startup disclaimer message 3001 - LEGAL_DISCLAIMER_TIME = Set kein_ld Enable the function of saving video files to NBT Hard Drive for play later 3000 ENT_MC_VIDEO_SUPPORT set to: aktiv Disable Office Function Speed Lock-Out 3000 OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv Enable Full Text Lines in Office While Driving 3003 PIM_DRIVING_TEXT_LENGTH set to: whole text_07 Enable Audible Chirp/Beep When Locking Car 3000 ACOUSTICAL_LOCK_CONFIRM set to: aktiv Enable Speeach Input for E-Mail or SMS 3003 SPEECH_2_TEXT set to: aktiv Enable Time-Stamp Display for Call Log 3003 TIMESTAMP_DISPLAY set to: aktiv Add GPS Current Location to Navi Menu Items 3000 NAVI_POSITION_MENU set to: aktiv Change maximum radio volume upon vehicle start [32 is the hex value for 50%, other hex values for example: 25% is 19; 75% is 4B)] 3002 VOL_MAX_ON = (Werte Value = 32) Display Tire Pressure AND temperature in vehicle status menu 3001 RDC_SAFETY = Set Aktiv Change Navi Voice to British English 3000 LANGUAGE_ENGLISH_UK set to: master (default was nicht_aktiv) 3000 LANGUAGE_ENGLISH_US set to: nicht_aktiv (default was aktiv) KOMBI: Set Clock via GPS: 3000 GPS_UHR = aktiv 01 Bright daytime instrument display a lot better than the nighttime orange display. 3007 DIM_NACHT_EIN = Werte = FF The default value is Werte=0A (10%) . This hexadecimal value relates to the sensitivity of the sensor that determines the threshold at which the display changes into its nighttime mode. When set to FF it stays on the daytime mode constantly."
#996
Hi,
So I got a 2019 Cooper S, the exterior door handles LEDs are there but the package that was required to make them active wasn’t optioned originally.
I’m guessing they are not coded to turn on or there’s a missing module to make them work.
I need help to source the right parts or for the coding itself.
I already tried coding them on when reversing, it didn't work.
Thank you.
So I got a 2019 Cooper S, the exterior door handles LEDs are there but the package that was required to make them active wasn’t optioned originally.
I’m guessing they are not coded to turn on or there’s a missing module to make them work.
I need help to source the right parts or for the coding itself.
I already tried coding them on when reversing, it didn't work.
Thank you.
#997
#998
I tried changing to the British nav voice on my 2016 f56 about 2 years ago and got the exact same problems so I quickly switched back to the standard US nav voice. Don't know a solution but had the same issue...
#999
#1000
Dear all,
i am in the process retrofitting Speed Limit Info to my 03/2018 F54.
I've checked that my car has the KAFAS2 camera and just received the offical FSC Code from BMW.
I have E-Sys installed and and E-Net cable at hand.
Now I am looking at E-Sys and complied the below process:
Do I have to add the SLI Option to my VO first and what FDL changes are necessary?
Many thanks,
Tim
i am in the process retrofitting Speed Limit Info to my 03/2018 F54.
I've checked that my car has the KAFAS2 camera and just received the offical FSC Code from BMW.
I have E-Sys installed and and E-Net cable at hand.
Now I am looking at E-Sys and complied the below process:
- E-Sys => Options => Settings => FSC Tab => Certificate Field: Load FSC Code Certificate --> xxxxxxx_007E0001.der)
-
- E-Sys => Comfort Mode => FSC => FSC Field: Load FSC Code --> . xxxxxxx_007E0001.fsc.
-
- FA Field: Select "Read FA" to use cars current VO.
-
- Parameter Fields:
-
- Diagnostic Address (hex) = 0x5D ??? --> Is that correct?
- Application Number (dec) = 0x7E
- Base Variant = KAFAS2 ??? --> Is that correct?
- Upgrade Index = 0x01
-
- Select "Upgrade FSC" to Import and Activate FSC Code.
Do I have to add the SLI Option to my VO first and what FDL changes are necessary?
- From an F45 SLI Activation - i found the below required codings:
- On the KAFAS 2 ECU:
- <<< CAFD_00001148.caf.000_029_006 (Kafas2) >>>
- Kafas2 > SLI_CODING 3010 > NPI_ON_OFF = F056
- Kafas2 > SLI_CODING 3010 > SLI_ON_OFF = F056
- On the KOMBI ECU:
- <<< CAFD_000009C8.caf.006_004_021 (KOMBI L7_MID) >>>
- KOMBI L7_MID > Anzeige_Konfiguration 3000 > SPEED_LIMIT = aktiv
- KOMBI L7_MID > ERM_Konfiguration 3004 > RCOG_TRSG_APPL = aktiv
- KOMBI L7_MID > ERM_Konfiguration 3004 > RCOG_TRSG_TIMEOUT = aktiv
- KOMBI L7_MID > FZG_Ausstattung 3003 > ANZEIGE_NPI = aktiv (Note: I think NPI stands for no passing information)
- KOMBI L7_MID > FZG_Ausstattung 3003 > TSM_ENABLE = aktiv
- KOMBI L7_MID > PIA_Einheiten 3008 > KI_PIA_SPEED_LIMIT = aktiv (Note: This was already aktiv for me)
- On the Head Unit ECU:
- <<< CAFD_00000DED.caf.003_015_037 (HU_NBT) >>>HU_NBT > EXBOX 3001 > SPEEDLIMIT_INFO = aktiv
Many thanks,
Tim
Last edited by dertimaushh; 08-12-2021 at 08:43 AM.