F55/F56 Mini coding/programming
#1002
Dear all,
i am in the process retrofitting Speed Limit Info to my 03/2018 F54.
I've checked that my car has the KAFAS2 camera and just received the offical FSC Code from BMW.
I have E-Sys installed and and E-Net cable at hand.
Now I am looking at E-Sys and complied the below process:
Do I have to add the SLI Option to my VO first and what FDL changes are necessary?
Many thanks,
Tim
i am in the process retrofitting Speed Limit Info to my 03/2018 F54.
I've checked that my car has the KAFAS2 camera and just received the offical FSC Code from BMW.
I have E-Sys installed and and E-Net cable at hand.
Now I am looking at E-Sys and complied the below process:
- E-Sys => Options => Settings => FSC Tab => Certificate Field: Load FSC Code Certificate --> xxxxxxx_007E0001.der)
-
- E-Sys => Comfort Mode => FSC => FSC Field: Load FSC Code --> . xxxxxxx_007E0001.fsc.
-
- FA Field: Select "Read FA" to use cars current VO.
-
- Parameter Fields:
-
- Diagnostic Address (hex) = 0x5D ??? --> Is that correct?
- Application Number (dec) = 0x7E
- Base Variant = KAFAS2 ??? --> Is that correct?
- Upgrade Index = 0x01
-
- Select "Upgrade FSC" to Import and Activate FSC Code.
Do I have to add the SLI Option to my VO first and what FDL changes are necessary?
- From an F45 SLI Activation - i found the below required codings:
- On the KAFAS 2 ECU:
- <<< CAFD_00001148.caf.000_029_006 (Kafas2) >>>
- Kafas2 > SLI_CODING 3010 > NPI_ON_OFF = F056
- Kafas2 > SLI_CODING 3010 > SLI_ON_OFF = F056
- On the KOMBI ECU:
- <<< CAFD_000009C8.caf.006_004_021 (KOMBI L7_MID) >>>
- KOMBI L7_MID > Anzeige_Konfiguration 3000 > SPEED_LIMIT = aktiv
- KOMBI L7_MID > ERM_Konfiguration 3004 > RCOG_TRSG_APPL = aktiv
- KOMBI L7_MID > ERM_Konfiguration 3004 > RCOG_TRSG_TIMEOUT = aktiv
- KOMBI L7_MID > FZG_Ausstattung 3003 > ANZEIGE_NPI = aktiv (Note: I think NPI stands for no passing information)
- KOMBI L7_MID > FZG_Ausstattung 3003 > TSM_ENABLE = aktiv
- KOMBI L7_MID > PIA_Einheiten 3008 > KI_PIA_SPEED_LIMIT = aktiv (Note: This was already aktiv for me)
- On the Head Unit ECU:
- <<< CAFD_00000DED.caf.003_015_037 (HU_NBT) >>>HU_NBT > EXBOX 3001 > SPEEDLIMIT_INFO = aktiv
Many thanks,
Tim
#1003
Hi all,
2022 F60, I was able to code the following:
- Handle Lights On with reverse
- Fogs on with HB
- Declaimer removed
- Auto Fold Mirrors when closing and opening
- Removed fake engine sound
Questions:
- Tire temperature wont show, even after coding a few times. Any ideas?
- If I add blinkers to the HUD , would it auto remove anything? I know if I add JCW sport display to the HUD then the GPS wont show during navigation.
Thank you all!
2022 F60, I was able to code the following:
- Handle Lights On with reverse
- Fogs on with HB
- Declaimer removed
- Auto Fold Mirrors when closing and opening
- Removed fake engine sound
Questions:
- Tire temperature wont show, even after coding a few times. Any ideas?
- If I add blinkers to the HUD , would it auto remove anything? I know if I add JCW sport display to the HUD then the GPS wont show during navigation.
Thank you all!
#1004
#1005
I don't think anyone here had been able to get the turn signal green arrows to show up in their head-up displays... I wish we could, it would be one little extra bit of MINI-awesomeness. As for the tire temps, I got it to display on my tire pressure screen on my 2016 F56 base Cooper... I keep a running text file in my cloud storage of all the coding changes I have made to my MINI and for the tire temp I only have this wrote down:
Display Tire Pressure & Temperature in Vehicle Info: 3001 RDC_SAFETY = aktiv
So that must be what worked for me on that.
I also added the JCW sport display option and it only comes on if you are in SPORT mode so if you are in GREEN or MID you will still have the navigation on your HUD and if you go from sport back to mid or green the JCW display goes away and the turn by turn navigation will reappear.
Display Tire Pressure & Temperature in Vehicle Info: 3001 RDC_SAFETY = aktiv
So that must be what worked for me on that.
I also added the JCW sport display option and it only comes on if you are in SPORT mode so if you are in GREEN or MID you will still have the navigation on your HUD and if you go from sport back to mid or green the JCW display goes away and the turn by turn navigation will reappear.
#1008
JCW in Head up display in sport mode:
go in to expert mode in both the HUD and KOMBI ECUs and enable the following: (All to “aktiv”)
HU_NBT > EXPERT MODE >
HUD_SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
Code vehicle then...
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
Code vehicle again.
-On center instrument Go to SETTINGS --> HEAD UP DISPLAY --> DISPLAYED INFORMATION: make sure SPORTS DISPLAYS is checked and at least "In SPORT Mode" is checked as well. Sports Displays only work in SPORT.
JCW Led light ring
NBT_HU_EVO > 3000 > John Cooper Works HMI > Aktiv then enable in settings under standard view
Hope that helps.
#1009
The directions I followed and wrote down on my running log of coding changes are as follows:
JCW in Head up display in sport mode:
go in to expert mode in both the HUD and KOMBI ECUs and enable the following: (All to “aktiv”)
HU_NBT > EXPERT MODE >
HUD_SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
Code vehicle then...
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
Code vehicle again.
-On center instrument Go to SETTINGS --> HEAD UP DISPLAY --> DISPLAYED INFORMATION: make sure SPORTS DISPLAYS is checked and at least "In SPORT Mode" is checked as well. Sports Displays only work in SPORT.
JCW Led light ring
NBT_HU_EVO > 3000 > John Cooper Works HMI > Aktiv then enable in settings under standard view
Hope that helps.
JCW in Head up display in sport mode:
go in to expert mode in both the HUD and KOMBI ECUs and enable the following: (All to “aktiv”)
HU_NBT > EXPERT MODE >
HUD_SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
Code vehicle then...
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
Code vehicle again.
-On center instrument Go to SETTINGS --> HEAD UP DISPLAY --> DISPLAYED INFORMATION: make sure SPORTS DISPLAYS is checked and at least "In SPORT Mode" is checked as well. Sports Displays only work in SPORT.
JCW Led light ring
NBT_HU_EVO > 3000 > John Cooper Works HMI > Aktiv then enable in settings under standard view
Hope that helps.
Thank you so much!
Will try tonight
#1011
Hi,
I was able to code almost everything but the below part:
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
I cannot find that anywhere on the app, I am using Bimmercode's latest app.
Any ideas?
I was able to code almost everything but the below part:
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
I cannot find that anywhere on the app, I am using Bimmercode's latest app.
Any ideas?
#1012
Hi,
I was able to code almost everything but the below part:
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
I cannot find that anywhere on the app, I am using Bimmercode's latest app.
Any ideas?
I was able to code almost everything but the below part:
KOMBI > EXPERT MODE >
FZG_Aussttang,HUD _SPORTANZEIGE_ENABLE, HUD_SPORTANZEIGE_FES_ENABLE, and HUD_SPORTANZEIGE_MS_GASSE_ENABLE to AKTIV.
----HUD_FAHRSTUFE_ENABLE*
I cannot find that anywhere on the app, I am using Bimmercode's latest app.
Any ideas?
#1013
#1014
#1015
Thank you.
No, I have a fully loaded F60 with all extras.
Bimmercode just does not offer that coding for the new Mini Head units.
I contacted another company who can do the codding remotely but I need to buy a cable. I will try to get the cable and get that code in unless you guys have any other idea?
The following users liked this post:
S_Banks (08-26-2021)
#1016
Hi,
Thank you.
No, I have a fully loaded F60 with all extras.
Bimmercode just does not offer that coding for the new Mini Head units.
I contacted another company who can do the codding remotely but I need to buy a cable. I will try to get the cable and get that code in unless you guys have any other idea?
Thank you.
No, I have a fully loaded F60 with all extras.
Bimmercode just does not offer that coding for the new Mini Head units.
I contacted another company who can do the codding remotely but I need to buy a cable. I will try to get the cable and get that code in unless you guys have any other idea?
The following users liked this post:
Sinbrad (05-14-2024)
#1017
#1018
#1019
Hi guys,
I want to install new 6WB digital cluster in Cooper S F56. I'm french and I have tried everything...
Uninstall and install multiple times ... Esys 3.27.1 and Prolauncher 2.8.2 BFU_XODE edition
when I open prolauncher, "date incorrect or date manipulation detected" error
when i change the date it works, but the token expires in 04/2020 error
when I change the date to 04/2020 "ONLY v2 EST files accepted" error
I will try tomorrow to clean all my disk ... Have you got any idea? I have the correct version of esys? Do you also use these versions?
I already have the obd cable and everything I need for the retrofit, I'm losing hope lol
Thank you for being so kind to answer me
I want to install new 6WB digital cluster in Cooper S F56. I'm french and I have tried everything...
Uninstall and install multiple times ... Esys 3.27.1 and Prolauncher 2.8.2 BFU_XODE edition
when I open prolauncher, "date incorrect or date manipulation detected" error
when i change the date it works, but the token expires in 04/2020 error
when I change the date to 04/2020 "ONLY v2 EST files accepted" error
I will try tomorrow to clean all my disk ... Have you got any idea? I have the correct version of esys? Do you also use these versions?
I already have the obd cable and everything I need for the retrofit, I'm losing hope lol
Thank you for being so kind to answer me
#1020
Hello everyone, I need your help, I'm new to coding. I am looking for a code to let the daytime running lights ring light up in position lights mode. because when I put the position lights, the ring goes out and instead I have a small LED light up in the anti fog lamp. on the jcw model it works like this. thanks in advance friends.
#1021
Hello everyone, I need your help, I'm new to coding. I am looking for a code to let the daytime running lights ring light up in position lights mode. because when I put the position lights, the ring goes out and instead I have a small LED light up in the anti fog lamp. on the jcw model it works like this. thanks in advance friends.
Thas how mine works, if DRL option is off, then the ring goes off in position (parking in the US) mode.
#1022
Does anyone know if BimmerCode allows you to turn on parking lines, contract and brightness in the rear camera mode options?
My 2022 F56 SE had the options but are non selectable. I turned on the trailer hitch zoom option with BimmerCode and it shows the option but also grayed out along with the other 3 options.
My 2022 F56 SE had the options but are non selectable. I turned on the trailer hitch zoom option with BimmerCode and it shows the option but also grayed out along with the other 3 options.
#1023