F55/F56 Coding parameters that actually work using Bimmercode Expert Mode
#51
I knew what you meant, but didn't have the heart to tell you. I just explained it to my Grandson the other day. When he saw the groove/slot on the roof gasket his eyes lit up. Could have been that light bulb over his head too, but he's only ten so I'll cut him some slack.
The following users liked this post:
Mini_Vinnie (11-27-2017)
#52
FYI: I started a thread in FAQ for bimmercode app codings. Check it out. If you have a tested coding parameter and it's not listed feel free to add it. As I see new postings I'll try to keep the list updated. I think it'll be easier to have this info in one place rather than spread across multiple threads/forums. Any suggestions for improvements let me know.
#53
I knew what you meant, but didn't have the heart to tell you. I just explained it to my Grandson the other day. When he saw the groove/slot on the roof gasket his eyes lit up. Could have been that light bulb over his head too, but he's only ten so I'll cut him some slack.
#56
Hey guys. I see you can activate rear fog lights. What’s the deal with that? Does Mini install it but not activate it unless you pay for the option? I’m pretty sure the lease I’m taking over doesn’t have rear fog lights but I’d love to have them.
I downloaded the app. What’s the best OBD2 module to buy? Is there anything that will read and clear codes should they arise?
thanks!
Best,
Gene
I downloaded the app. What’s the best OBD2 module to buy? Is there anything that will read and clear codes should they arise?
thanks!
Best,
Gene
#57
This is the module that I bought and I can confirm that it works.
If your car is like my '15 model it comes with everything needed for the rear fogs except the correct switch and the programming. You can buy the switch from your dealer (or eBay) , but the dealer will/can not program it unless it shows the option when they check the VIN. I bought the switch and had the car coded at MOTD a couple years ago. Then two weeks later when I had the JCW BBK installed they had to enter the programming for the upgrade. This canceled all the custom coding I had done. Every software update the dealer does will have the same result. That's what makes the app so great. I also like being able to code using my phone or iPad vs a Windows PC and a cable.
I have a brand new cable I'm trying to get rid of now.
If your car is like my '15 model it comes with everything needed for the rear fogs except the correct switch and the programming. You can buy the switch from your dealer (or eBay) , but the dealer will/can not program it unless it shows the option when they check the VIN. I bought the switch and had the car coded at MOTD a couple years ago. Then two weeks later when I had the JCW BBK installed they had to enter the programming for the upgrade. This canceled all the custom coding I had done. Every software update the dealer does will have the same result. That's what makes the app so great. I also like being able to code using my phone or iPad vs a Windows PC and a cable.
I have a brand new cable I'm trying to get rid of now.
#58
This is the module that I bought and I can confirm that it works.
https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1
If your car is like my '15 model it comes with everything needed for the rear fogs except the correct switch and the programming. You can buy the switch from your dealer (or eBay) , but the dealer will/can not program it unless it shows the option when they check the VIN. I bought the switch and had the car coded at MOTD a couple years ago. Then two weeks later when I had the JCW BBK installed they had to enter the programming for the upgrade. This canceled all the custom coding I had done. Every software update the dealer does will have the same result. That's what makes the app so great. I also like being able to code using my phone or iPad vs a Windows PC and a cable.
I have a brand new cable I'm trying to get rid of now.
https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1
If your car is like my '15 model it comes with everything needed for the rear fogs except the correct switch and the programming. You can buy the switch from your dealer (or eBay) , but the dealer will/can not program it unless it shows the option when they check the VIN. I bought the switch and had the car coded at MOTD a couple years ago. Then two weeks later when I had the JCW BBK installed they had to enter the programming for the upgrade. This canceled all the custom coding I had done. Every software update the dealer does will have the same result. That's what makes the app so great. I also like being able to code using my phone or iPad vs a Windows PC and a cable.
I have a brand new cable I'm trying to get rid of now.
Best,
Gene
#60
#61
Yep, they're on either side of the exhaust. They are the same brightness as the brake lights. I had to use mine a few times on my R56. Once when I got caught in a snow/sleet storm for about 250 miles returning from the Dragon and a couple times in the fog driving in the mountains. I figure they must work since nobody rear ended me.
The following users liked this post:
phantasms (11-30-2017)
#62
Yep, they're on either side of the exhaust. They are the same brightness as the brake lights. I had to use mine a few times on my R56. Once when I got caught in a snow/sleet storm for about 250 miles returning from the Dragon and a couple times in the fog driving in the mountains. I figure they must work since nobody rear ended me.
Can you post a picture of the switch you bought Whitey? I noticed on my panel, I have a button for the fog then a dead button right next to that switch. That must be where the rear switch might go
#63
This is the realoem.com page. The part number has changed since I bought mine, but if you're gonna search for a used one you might search the discontinued numbers as well. You can also try AllMag who is a site vendor/sponsor for a used one. They usually charge ~1/2 MSRP. I believe the one you're looking for is #8. There is only a single wire hookup regardless of which switch you have. Everything is done via software.
http://www.realoem.com/bmw/enUS/show...diagId=61_3283
The coding required can be found in 3rd Gen FAQ.
http://www.realoem.com/bmw/enUS/show...diagId=61_3283
The coding required can be found in 3rd Gen FAQ.
#64
#65
#66
Animation is mostly just for fun, especially the BMW/M ones. I have the JCW splash screen on my Clubman, even though it's not a real JCW, but you can also specify the new LCI splash screen too with the new logo.
#67
#68
#69
Oh baby! OBD2 adapter came in today, so impatient me had to get some coding done. LOL. I did just about all the coding on the coding list, minus the rear fogs as I have not purchased the switch yet. Now, I was able to get the power mirrors to fold in and out via the key fob, but not the Comfort Access button. Any suggestions? I always use the comfort access button and not the key fob.
#72
Cold monitoring is the same thing but checking the bulb occasionally while it is off (by briefly putting a voltage and checking to see if it flows through the filament).
#74
#75
Expert Mode?
Coding I tested today using Bimmercode Expert Mode:
Add as you wish, but only tested and working functions.
Activate Rear Fog Lights:
3068 NSL_Verbaut = Verbaut
Code first, the cycle ignition, then restart Bimmercode for the below options
to show up
Activate Rear Fog Lights feature for lighting switch:
3064 Mapping_Nebelschlussl_L_output = nsl_l
3064 Mapping_Nebelschlussl_L_Function = nebelschlusslicht
3064 Mapping_Nebelschlussl_R_output = nsl_r
3064 Mapping_Nebelschlussl_R_Function = Nebelschlusslicht
Every time you recode after doing rear fogs, you WILL get a dash warning about lighting errors.
cycle the ignition, it will go away, the warning after coding is because the VO has not been coded.
It will not persist after that.
Close windows, sunroof & mirror from key fob:
3056 KOMFORTSCHLIESSUNG_FB = aktiv 00
Turn off window roll-up door interrupt when ignition off, and door is being opened:
3050 FH_TUERAUF_STOP_MAUT =aktiv
Disable Active Sound Design
3000 ASD_SOUND_OFF = aktiv
Display Tire Pressure & Temperaure in Vehicle Info:
3001 RDC_SAFETY = aktiv
Fogs on with high beams
3068 NSW_AUS_BEI_FL = nicht aktiv (AUS means off + nicht aktiv is a double negative = ON, so nicht aktiv)
Fogs on with DRL/Parking lamps
3068 NSW_EIN_AUF_LDS_STL =Activ (EIN_ AUF means To go on)
Enable Illumination of Exterior Door Handle LEDs when in Reverse
3070 OVT_BEI_REUCKFAHRLICHT = aktiv
Installed LED reverse lights:
Turn off warm and cold monitoring
Turn on LED status
Rückfahrscheinwerfer = Reverse lamps. RFS
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED = aktiv
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED aktiv
Tip blinker stalk for 5 blinks instead of 3.
3069 PIA_DEFAULT_TIPPBLINKEN =FUENFMAL
Add as you wish, but only tested and working functions.
Activate Rear Fog Lights:
3068 NSL_Verbaut = Verbaut
Code first, the cycle ignition, then restart Bimmercode for the below options
to show up
Activate Rear Fog Lights feature for lighting switch:
3064 Mapping_Nebelschlussl_L_output = nsl_l
3064 Mapping_Nebelschlussl_L_Function = nebelschlusslicht
3064 Mapping_Nebelschlussl_R_output = nsl_r
3064 Mapping_Nebelschlussl_R_Function = Nebelschlusslicht
Every time you recode after doing rear fogs, you WILL get a dash warning about lighting errors.
cycle the ignition, it will go away, the warning after coding is because the VO has not been coded.
It will not persist after that.
Close windows, sunroof & mirror from key fob:
3056 KOMFORTSCHLIESSUNG_FB = aktiv 00
Turn off window roll-up door interrupt when ignition off, and door is being opened:
3050 FH_TUERAUF_STOP_MAUT =aktiv
Disable Active Sound Design
3000 ASD_SOUND_OFF = aktiv
Display Tire Pressure & Temperaure in Vehicle Info:
3001 RDC_SAFETY = aktiv
Fogs on with high beams
3068 NSW_AUS_BEI_FL = nicht aktiv (AUS means off + nicht aktiv is a double negative = ON, so nicht aktiv)
Fogs on with DRL/Parking lamps
3068 NSW_EIN_AUF_LDS_STL =Activ (EIN_ AUF means To go on)
Enable Illumination of Exterior Door Handle LEDs when in Reverse
3070 OVT_BEI_REUCKFAHRLICHT = aktiv
Installed LED reverse lights:
Turn off warm and cold monitoring
Turn on LED status
Rückfahrscheinwerfer = Reverse lamps. RFS
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED = aktiv
3061 RFS_L_KALTUEBERWACHUNG = nicht aktiv
3061 RFS_L_WARMUEBERWACHUNG = nicht aktiv
3061 RFS_L_IS_LED aktiv
Tip blinker stalk for 5 blinks instead of 3.
3069 PIA_DEFAULT_TIPPBLINKEN =FUENFMAL