F55/F56 thievin' Mini store
#1
thievin' Mini store
while back I go to Mini Store & they charge me $313 for a $90 downstream O2 sensor. come to find out later. Wised me up. Went yesterday to get # & $ on TPMS sensor. $ = 179, which I know I can reduce to $25 to $40,? & # = 36-10-6-881-890. Now, when I run that # through different Parts Sites I get about 3 different items & I'm trying to decide which way to go considering I've gone from stock 17" rims to 18" rims.& I don't know if the TPMS were changed or stock for that year (stock I assume) because the rim-switch was done bt previous owner. Decisions, Decisions ! all I want is ONE SHOW - GOOD-BYE !
Last edited by Stu-mon; 06-12-2024 at 07:17 AM.
#3
check Outmotoring https://www.outmotoring.com/_search....ms&categoryid=
They have been the best for customer service for my Mini parts. Prices are always very competitive.
They have been the best for customer service for my Mini parts. Prices are always very competitive.
The following users liked this post:
Stu-mon (06-12-2024)
#4
#5
Yep we have aftermarket options and i can tell you most of time what the OEM is for that part. I run the schwaben TPMS sensor programable on that one part on both my MINIs and range rover.
https://www.ecstuning.com/Search/Sit...h/36106881890/
https://www.ecstuning.com/Search/Sit...h/36106881890/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 06-13-2024 at 08:19 AM.
The following users liked this post:
Stu-mon (06-13-2024)
#6
#7
after browsing Outmotoring again I saw 2) 36-10-6-881-890 1) was $123 & 2) was $89.50. I'm thinking the $89.50 jobber. Since the one that's on the car still measures tire pressure fine, I'm thinking to just leave the guts in the tire, not breaking it down, & just spinning on the top for the time being & see if that turns off my 3 yellow icons. If not I can always break 'er down. My MFG Date was 7/27/14 on my '15 F-56 & last 7 digits on VIN are 2A34064 TELL ME WHAT YOU THINK ! Thanks Gents
Last edited by Stu-mon; 06-13-2024 at 06:13 AM.
Thread
Thread Starter
Forum
Replies
Last Post
goclubman
F54 :: Clubman Talk (2015+)
9
06-12-2024 10:32 AM