Post pics of your Factory JCW MINI
#652
Thanks so much. I've gotten a bunch of compliments already. Now for that first wave from a fellow mini driver....
And thanks for the feedback on the scoop. The body color may grow on me more. What's estimated cost on aero kit? If I have to a$k then I $houldn't even think about it probably....
And thanks for the feedback on the scoop. The body color may grow on me more. What's estimated cost on aero kit? If I have to a$k then I $houldn't even think about it probably....
#654
'09 Pepper White
Exterior styling cues: Bonnet stripes, stubby antenna, black belt line, side marker light tint.
Performance mods: JCW suspension, JCW strut brace, JCW undercarriage covers, JCW CF shifter w/Helix short shift kit, 215/45/ZR17 non-run flats.
Fun stuff: Harmon Kardon radio, iPod dock, Sirius radio, TomTom GPS.
Double-click thumbnails for details.
Performance mods: JCW suspension, JCW strut brace, JCW undercarriage covers, JCW CF shifter w/Helix short shift kit, 215/45/ZR17 non-run flats.
Fun stuff: Harmon Kardon radio, iPod dock, Sirius radio, TomTom GPS.
Double-click thumbnails for details.
Last edited by Teibito; 07-22-2010 at 03:19 AM. Reason: spelling
#656
finally had some mods installed after having my jcw for 2 years...
17x8 ccw classics, ast coilovers, swift springs, vorshlag camber plates, powerflex control arm bushings, h&r rear swaybar, nm engineering front/rear sway bar links and control arms. still need to re-adjust the height and dampening of the coilovers.
great thanks to danny at minicorsa for doing the install.
17x8 ccw classics, ast coilovers, swift springs, vorshlag camber plates, powerflex control arm bushings, h&r rear swaybar, nm engineering front/rear sway bar links and control arms. still need to re-adjust the height and dampening of the coilovers.
great thanks to danny at minicorsa for doing the install.
#660
#664
#665
5/16 Tape is what you want
All you need is black vinyl pinstripe tape in 5/16, a good exacto knife, and some patience. Matte black looks better than glossy. I did it myself but it took the better part of an afternoon, 'cause I ripped off a section and started it over if it did not look right. If you can't find a roll, you can always go to a sign shop and have them cut the pieces to size. You need to get the tape tucked under the rubber moulding for it to look right.
https://www.northamericanmotoring.co..._thumbnail.jpg
https://www.northamericanmotoring.co..._thumbnail.jpg
#667
2nd Gear
iTrader: (1)
Join Date: Nov 2008
Location: Short Pump, VA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
MINI cone popper
Although you can't see the car from this view, I ran over a 7 cone wall while autocrossing on Sunday. The camera was on the rear bumper and the cones pop out over the rest of the course.
http://www.youtube.com/watch?v=979jtj2nak0
http://www.youtube.com/watch?v=979jtj2nak0
#672
I actually don't know the owner.A friend came for a few days from out of town and was staying at his sister's house.He's bro in law has a Quattroporte and the JCW.He borrowed the JCW for a few days.He says that since the arrival of the Mini the Maserati spends increasingly longer periods of times neglected in the garage.
#673
Former Vendor
iTrader: (1)
Join Date: Jun 2007
Location: Oregon
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
I actually don't know the owner.A friend came for a few days from out of town and was staying at his sister's house.He's bro in law has a Quattroporte and the JCW.He borrowed the JCW for a few days.He says that since the arrival of the Mini the Maserati spends increasingly longer periods of times neglected in the garage.