What did you do to your mini today?
#8401
Very nice looking Mini. Couple of questions if you don't mind. Any mods needed to take advantage of the Accessport remapping? Also, what offset are your wheels and what size spacers did you use?
#8408
#8409
It's really easy to do. There are tons of videos on youtube that will show you step by step. in particular by dipyourcar.com tape off about an inch around the symbol coat it on, and peel off the excess.
#8412
Greetings all the way from South Africa!!
Well , i carbon wrapped the inside of the hood scoop red. was just playing around with a few ideas but i actually like it. its not too flashy, but it is visible.
Got "Actual Size" plates with "SOOPER" in small font at the bottom, seen many people smile and take pictures of it completely amused
Then i ordered some Union Jack door handle covers off ebay. Adds a nice touch to the interior
ive also recently added some Lamin-x film on the tail lights. there are some cheap films around but Lamin-x has been great for me. a bit thick to work with, but once the heat is applied it sticks and shapes perfectly most people go for the smoked or dark black look, but i like the red
Well , i carbon wrapped the inside of the hood scoop red. was just playing around with a few ideas but i actually like it. its not too flashy, but it is visible.
Got "Actual Size" plates with "SOOPER" in small font at the bottom, seen many people smile and take pictures of it completely amused
Then i ordered some Union Jack door handle covers off ebay. Adds a nice touch to the interior
ive also recently added some Lamin-x film on the tail lights. there are some cheap films around but Lamin-x has been great for me. a bit thick to work with, but once the heat is applied it sticks and shapes perfectly most people go for the smoked or dark black look, but i like the red
#8413
#8416
#8418
I picked up my MCSa from the shop today after getting the valve body replaced. Fixed the hard shifting issue and now that the problems are resolved, the fun of modding can begin! Looking to add a 15% SC pulley and an intake for now, but I'd like to add a JCW cat back and chip it eventually.
#8419
#8420
#8421
Recently:
-Replaced leaky motor mount with OEM.
-Euro parcel shelf (driver side)
-"3"-ball pool ball shift ****
-Coverking neoprene car seats
-Osram 65W headlight bulbs
-Rubber mats
-Cabrio braces
-Glove box organizer
-PIAA 540 driving lights (waiting to be installed)
-Rear window and rear side window shades
-Replaced leaky motor mount with OEM.
-Euro parcel shelf (driver side)
-"3"-ball pool ball shift ****
-Coverking neoprene car seats
-Osram 65W headlight bulbs
-Rubber mats
-Cabrio braces
-Glove box organizer
-PIAA 540 driving lights (waiting to be installed)
-Rear window and rear side window shades
#8422
Today I completed my RMW remote tune. I was able to notice an immediate difference. I like the fact he increased my idle speed to 1k as it really smoothed out the NVH that increased with the addition of the Powerflex engine and gearbox mounts as well as the VibraTecnics upper mount.
I also received my Bluetooth OBDII adapter and got to mess around with the Torque Android App. Looks like this is going to be a fun tool.
Now I am waiting on UPS to deliver my two cans of Astro Black and Clear-coat so I can complete my wheel arches and rocker panel project. I am trying to get this all done prior to Saturday when my wife and I will be cruising the Western North Carolina Mountains with The Tarheel Mini Club.
Sent from my iPad using NAMotoring
I also received my Bluetooth OBDII adapter and got to mess around with the Torque Android App. Looks like this is going to be a fun tool.
Now I am waiting on UPS to deliver my two cans of Astro Black and Clear-coat so I can complete my wheel arches and rocker panel project. I am trying to get this all done prior to Saturday when my wife and I will be cruising the Western North Carolina Mountains with The Tarheel Mini Club.
Sent from my iPad using NAMotoring
#8423
Recently:
-Replaced leaky motor mount with OEM.
-Euro parcel shelf (driver side)
-"3"-ball pool ball shift ****
-Coverking neoprene car seats
-Osram 65W headlight bulbs
-Rubber mats
-Cabrio braces
-Glove box organizer
-PIAA 540 driving lights (waiting to be installed)
-Rear window and rear side window shades
-Replaced leaky motor mount with OEM.
-Euro parcel shelf (driver side)
-"3"-ball pool ball shift ****
-Coverking neoprene car seats
-Osram 65W headlight bulbs
-Rubber mats
-Cabrio braces
-Glove box organizer
-PIAA 540 driving lights (waiting to be installed)
-Rear window and rear side window shades