Removing Emblems.....
#26
04-09-2013, 07:45 AM
1st Gear
Join Date: Apr 2011
Location: Boston, MA area
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
#28
05-25-2013, 03:15 PM
2nd Gear
Join Date: Apr 2011
Location: Riverside County
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
seems to be conflicting info, can anyone confirm pins or no pins on JCW emblem for rear trunk lid (2011 model year). also, if there are pins i can see how using fishing line to remove old one could be problematic as how do you loosen up between the pins without scratching paint.
if there are no pins on the other hand, any ideas on how to align the new one in place? make a template maybe?
it's being replaced because the red paint on John Cooper is gone-just chrome now... after just one year
thanks for your help
if there are no pins on the other hand, any ideas on how to align the new one in place? make a template maybe?
it's being replaced because the red paint on John Cooper is gone-just chrome now... after just one year
thanks for your help
The new emblem actually came on a template, that helped me line it up perfectly on the boot.
I hope this helps.
#35
05-26-2013, 08:55 PM
3rd Gear
Join Date: Aug 2012
Location: East Bay, CA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Safest choice is the tape. I had bought the adhesive glue, and the warning label said, "could melt paint" (in so many words), so I returned it and bought the tape. I used it to reapply my bonnet emblem. Pain to cut, but didn't harm my paint and it is stuck on really good.
Thread
Thread Starter
Forum
Replies
Last Post
UncDeo
Stock Problems/Issues
12
11-04-2019 04:08 AM
Mini Mania
Drivetrain Products
0
09-02-2015 09:05 AM
Interior/Exterior Another hood stripe removal thread
broncobuddha
Interior/Exterior
3
09-01-2015 06:32 PM