How To Interior/Exterior :: Headlight Joey Mod How To
#176
If you're talking about the led's in the projector surrounds here's the thread:
https://www.northamericanmotoring.co...eadlights.html
Just power them any way you like, key, park lights, headlights or even switched if you want to use a non-road legal color just for show when parked, be creative.
https://www.northamericanmotoring.co...eadlights.html
Just power them any way you like, key, park lights, headlights or even switched if you want to use a non-road legal color just for show when parked, be creative.
#178
#179
#183
You have to cut the lights apart (I believe he uses a dremel) to get the 'cover' off of it, they aren't in two pieces like the headlights. Once open its pretty easy, then just make sure you use a really good waterproof glue to put them back together. There is an extra layer of sealant then applied to the outside rim.
#184
Thanks for this thread for the Joey mod! Doing my 06 Xenons right now. Only thing I'm doing different is painting essentially everything except the projector lens and the chrome reflector for the high beam, black. I would love to do bi-Xenon projectors one day, but for now this will have to do. I'm probably the only person to think this way, but I don't like the little ovals where the light shines through going around the projector shroud, so I painted those black as well. Looks much better to me this way.
I hate chrome.
I hate chrome.
#185
I painted almost everything as well: http://www.blueminicooper.com/2013/j...ight-blackout/
The hardest was getting them apart, I was afraid to break the tabs, but once you get the first one apart its all down hill.
The hardest was getting them apart, I was afraid to break the tabs, but once you get the first one apart its all down hill.
#186
I really want to get rid of all the chrome on my car.. I have the adaptive headlights (R56).. any reason I shouldn't do this mod? has anyone done this with the adaptive headlights?
#187
Did the mod today as well as removed the orange lense and changed the bulb to an amber one(stock one is clear). And removed the center cones that go in front of the bulbs. BTW auto zone says the replacement turn bulb is 7075. This is not true. Its 1056 but finding those are tough, 1156 is a compatible replacement. You can find the amber 1156 which plugs and plays to replace your OEM clear bulbs when you punch the orange lenses out and choose to go no-lense. The 7075 does not fit in the stock bulb holder. The 1156 is rated at a few watts higher but nothing close to fuse blowing or really any issue causing scenario.
#190
Mine's a Countryman, so the headlights are not round, but the procedure should be the same. I baked the headlights at 200 degrees for 7 minutes and tried prying them open, but could not get them apart. Baked them again for another 7 minutes, with no success. Finally, I just reinstalled them without the Joey Mod and called it a day. Any advice?
#192
Mine's a Countryman, so the headlights are not round, but the procedure should be the same. I baked the headlights at 200 degrees for 7 minutes and tried prying them open, but could not get them apart. Baked them again for another 7 minutes, with no success. Finally, I just reinstalled them without the Joey Mod and called it a day. Any advice?
#199
Found this thread from another site. It is in another language but has some good pictures in it for the rear.
http://www.newminiclub.nl/forum/about5765.html
http://www.newminiclub.nl/forum/about5765.html
#200
Im trying to seperate my light lenses but not having luck. Its on the old style xenons. Not really looking to paint them, just have one housing where the internal self leveling is broken, and the other housing has good internals, but the lense is really scratched and hazy. Llooking to swap the good lense. Using a heat gun how long should i be heating it up for. Its almost to hot to touch, but the adhesive doesnt seem to be losening. Would i be better off putting it in the oven?