How To Interior/Exterior :: Replace mirror covers (WITHOUT breaking the clips!)
#52
5th Gear
iTrader: (3)
Join Date: Aug 2004
Location: Locked away
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
#56
4th Gear
iTrader: (1)
Join Date: Jun 2007
Location: Little Rock, AR
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Ok, they're done, but not without incident.
I started with the right one, but when I tried to pull the mirror away from the bottom as instructed, it wouldn't pop off easily and I was afraid to pull harder. So I tried just popping off the tabs with a butter knife, I got 1, and as other poster suggested, inserted a butter knife into another, as I was trying to pop the 3rd tab, the butter knife fell and scratched my door :-(. So, when trying this put a towel over your door too.
Anyway, after getting 2 tabs popped and the knife falling, I gently pushed the cap out and it popped off, voila.. of course the new cap popped right on.
On the driver's side... it went differently, I could only see one tab, felt around for others with no luck, caps are black so I couldn't see very well
So I tried to take the mirror off first, it came off but one little plastic tab broke off. I kept it.. just in case I need to glue it back on later. Of course once the mirror was off, no problem getting the cap off and new one on. Luckily the one broken tab on the mirror didn't seem to matter as the mirror went back on just fine and moves around fine also.
Will post pics later.
I started with the right one, but when I tried to pull the mirror away from the bottom as instructed, it wouldn't pop off easily and I was afraid to pull harder. So I tried just popping off the tabs with a butter knife, I got 1, and as other poster suggested, inserted a butter knife into another, as I was trying to pop the 3rd tab, the butter knife fell and scratched my door :-(. So, when trying this put a towel over your door too.
Anyway, after getting 2 tabs popped and the knife falling, I gently pushed the cap out and it popped off, voila.. of course the new cap popped right on.
On the driver's side... it went differently, I could only see one tab, felt around for others with no luck, caps are black so I couldn't see very well
So I tried to take the mirror off first, it came off but one little plastic tab broke off. I kept it.. just in case I need to glue it back on later. Of course once the mirror was off, no problem getting the cap off and new one on. Luckily the one broken tab on the mirror didn't seem to matter as the mirror went back on just fine and moves around fine also.
Will post pics later.
#57
Glad you got it done, Tess. Can't wait to see the pics !
Sorry you had some troubles though. That scratch on the PS door shouldn't be deep. You should be able to buff it out.
When it comes to pulling those mirrors off, you can't be timid about it. They require some elbow grease. But they will come off, even the ones that seem like they won't.
Hey... I remember back about a year, or so, ago that you were talking about doing mods on your MINI but you were somewhat unsure of yourself. I believe you were worried about your creativity (correct me, if I'm wrong). Anyway... good to see you are giving it a shot !
Sorry you had some troubles though. That scratch on the PS door shouldn't be deep. You should be able to buff it out.
When it comes to pulling those mirrors off, you can't be timid about it. They require some elbow grease. But they will come off, even the ones that seem like they won't.
Hey... I remember back about a year, or so, ago that you were talking about doing mods on your MINI but you were somewhat unsure of yourself. I believe you were worried about your creativity (correct me, if I'm wrong). Anyway... good to see you are giving it a shot !
Last edited by CR&PW&JB; 01-12-2008 at 04:29 PM. Reason: oops, tpyo !
#58
4th Gear
iTrader: (1)
Join Date: Jun 2007
Location: Little Rock, AR
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Glad you got it done, Tess. Can't wait to see the pics !
Sorry you had some troubles though. That scratch on the PS door shouldn't be deep. You should be able to buff it out.
When it comes to pulling those mirrors off, you can't be timid about it. They require some elbow grease. But they will come off, even the ones that seem like they won't.
Hey... I remember back about a year, or so, ago that you were talking about doing mods on your MINI but you were either unsure of yourself. I believe you were worried about your creativity (correct me, if I'm wrong). Anyway... good to see you are giving it a shot !
Sorry you had some troubles though. That scratch on the PS door shouldn't be deep. You should be able to buff it out.
When it comes to pulling those mirrors off, you can't be timid about it. They require some elbow grease. But they will come off, even the ones that seem like they won't.
Hey... I remember back about a year, or so, ago that you were talking about doing mods on your MINI but you were either unsure of yourself. I believe you were worried about your creativity (correct me, if I'm wrong). Anyway... good to see you are giving it a shot !
So far I'm doing things that can be undone, not much.. mirror caps, actual size sticker, my car's name on the side in chrome letters, probably stripes soon.. oh and the $600 ventureshield on the front that protected everything but the lens cap on the fog light :-(
#60
#61
If you have to resort to taking off the mirror cap (or for any other job that requires prying 2 pieces of plastic apart) here's a handy tool I keep in my tool box. I used it when I put on my chrome mirror caps before I learned of the "remove the mirror" method. Using 3 of these came in very handy to keep the cap from popping back on last clip I just released while working on the next one.
It's quite strong and has a good fine edge to get between plastic stuff without marring it like a screwdriver will.
The best thing about it is the cost.
FREE
Go to the dairy department of your grocery store or your local drugstore and if you don't find one still attached to the 1/2 gallon milk jugs, look around the bottom of the dairy case. If you can't find one, ask the guy that stocks the dairy department. While you're at it, get two or three. The price is right.
It's quite strong and has a good fine edge to get between plastic stuff without marring it like a screwdriver will.
The best thing about it is the cost.
FREE
Go to the dairy department of your grocery store or your local drugstore and if you don't find one still attached to the 1/2 gallon milk jugs, look around the bottom of the dairy case. If you can't find one, ask the guy that stocks the dairy department. While you're at it, get two or three. The price is right.
#62
2nd Gear
iTrader: (5)
Join Date: Apr 2007
Location: So Calif
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Mirror Caps
After reading how to pop off the caps I picked up a set of carbon fiber caps...however I can't get my fingers under the mirror as described to start the process. I will try a method a friend used successfully, a spork from Taco Bell is stiff enough to unclip the tabs yet flexible enough to bend around the mirror. Wish me luck.
#64
After reading how to pop off the caps I picked up a set of carbon fiber caps...however I can't get my fingers under the mirror as described to start the process. I will try a method a friend used successfully, a spork from Taco Bell is stiff enough to unclip the tabs yet flexible enough to bend around the mirror. Wish me luck.
#66
New here, but trying to figure out how to replace the mirror glass on my driver's side mirror.
My husband had an unpleasant encounter with a buzzard on the road. The whole mirror sprang toward the window, didn't break, but the glass fell out. I got a replacement mirror glass and attached it, but it is not staying firmly in place. It rotates up and down but not side to side. Is there a pivoting mechanism that could have broken on impact?
Mary Anne
My husband had an unpleasant encounter with a buzzard on the road. The whole mirror sprang toward the window, didn't break, but the glass fell out. I got a replacement mirror glass and attached it, but it is not staying firmly in place. It rotates up and down but not side to side. Is there a pivoting mechanism that could have broken on impact?
Mary Anne
#67
The mirror glass is held on by a ring of plastic clips that snap into a moving "puck" inside the mirror housing. If all the clips are engaged, but the glass still moves around, all I can think is that the linkage that holds the "puck" into the housing was also damaged. I'd have your local MINI dealer take a look and suggest a fix.
Also, if you can't get your fingers into the lower edge of the glass try this: press on the upper edge of the mirror, and while pressing, see if your fingers will then fit under the lower edge. You can also press in on the INNER top edge - there seems to be a bit more travel i that direction. My hand's not huge, to be sure, but there's plenty of room for my index and middle finger to slip in, hook the glass and pull.
Also, if you can't get your fingers into the lower edge of the glass try this: press on the upper edge of the mirror, and while pressing, see if your fingers will then fit under the lower edge. You can also press in on the INNER top edge - there seems to be a bit more travel i that direction. My hand's not huge, to be sure, but there's plenty of room for my index and middle finger to slip in, hook the glass and pull.
#68
#71
I tried taking my mirrors off before actually buying anything today. I could not get my fingers underneath the mirror! I dont think I have fat fingers I have an 07 MC has anyone else had problems getting their SLIM fingers underneath? Also the cheapest I have found mirrors (I want checkered) is $134.... anyone have them for less?
Edit: Nevermind I got it! I still might have fat fingers but I know how to take the mirrors off!
Edit: Nevermind I got it! I still might have fat fingers but I know how to take the mirrors off!
Last edited by Dory the Cooper; 05-14-2008 at 09:01 PM.
#73
#74