Interior/Exterior Oracle body kit, looks like Orciari kit
#27
09-20-2007 | 04:30 PM
OVERDRIVE
Joined: May 2003
Posts: 7,914
Likes: 35
From: Greensboro, NC
ssssshhh....it's gotten a whole lot more refined...wait till you see...
BTW...what you saw was just the black trim replacement which will be refined...I'm now going after the "END GAME" kit design which will cover complete redesign of the bonnet/vents, front air dam + splitter, rear facia + diffusers/ground effects, fender swells way beyond just lips, companion skirts and radical wings...by the time this is shown to the investors, the design will already be in 3D and ready for tooling...
BTW...what you saw was just the black trim replacement which will be refined...I'm now going after the "END GAME" kit design which will cover complete redesign of the bonnet/vents, front air dam + splitter, rear facia + diffusers/ground effects, fender swells way beyond just lips, companion skirts and radical wings...by the time this is shown to the investors, the design will already be in 3D and ready for tooling...
Last edited by MSFITOY; 09-20-2007 at 04:39 PM.
#29
09-20-2007 | 05:11 PM
OVERDRIVE
Joined: May 2003
Posts: 7,914
Likes: 35
From: Greensboro, NC
, i did send and resent you a reply and outlook says it was sent 
Will try again right now!
#31
09-20-2007 | 06:49 PM
5th Gear
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: USA
you have to paint the fenders anyways.....any bodyshop could fill those holes easy
rear looks like this....on either the cooper or Cooper S bumper, they both have center exit exhaust.
The cooper version has a less agressive front lip....and with filled holes, i think its the best kit avaible besides the OEM ones.
rear looks like this....on either the cooper or Cooper S bumper, they both have center exit exhaust.
The cooper version has a less agressive front lip....and with filled holes, i think its the best kit avaible besides the OEM ones.
#35
09-20-2007 | 08:16 PM
Former Vendor
Joined: Jan 2004
Posts: 8,337
Likes: 4
From: oh10
filled holes and flat black paint...... you're talking about an OEM-looking widebody kit.
Only thing holding me back is importing it, and the cost of switching to center exhaust.
#44
09-21-2007 | 03:45 PM
2nd Gear
Joined: May 2004
Posts: 116
Likes: 0
From: YORKTOWN, VA.
That’s my silver MCS on the VIS website just to start off. I can tell you that the stuff from VIS fits rather good. My MCS was rear ended last year, and when I went to replace my Orciari rear bumper I found that I could not replace just the bumper I would have to order a complete kit. $1300 I was not going to spend, so I started looking around and found that VIS had a look a like kit. I ordered the rear bumper and the fit was just as good as the original… In fact I would say that it’s actual better than the orginal because it’s thicker and can take more of an impact without cracking. Lastly I would have to disagree with those who say that the Orciari kit is ugly or doesn’t look good on the car, but that’s just my .02
#46
09-21-2007 | 04:58 PM
Former Vendor
Joined: Jan 2004
Posts: 8,337
Likes: 4
From: oh10
#47
09-21-2007 | 04:59 PM
Former Vendor
Joined: Jan 2004
Posts: 8,337
Likes: 4
From: oh10
That’s my silver MCS on the VIS website just to start off. I can tell you that the stuff from VIS fits rather good. My MCS was rear ended last year, and when I went to replace my Orciari rear bumper I found that I could not replace just the bumper I would have to order a complete kit. $1300 I was not going to spend, so I started looking around and found that VIS had a look a like kit. I ordered the rear bumper and the fit was just as good as the original… In fact I would say that it’s actual better than the orginal because it’s thicker and can take more of an impact without cracking.
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
Mini Mania
Drivetrain Products
0
08-25-2015 01:28 PM
Mini Mania
Vendor Announcements
0
08-19-2015 09:12 AM
Mini Mania
Vendor Announcements
0
08-11-2015 09:01 AM