Interior/Exterior VIS CF front lip?
#3
My little dose of LITHIUM
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 2
From: Albuquerque New Mexico
I also couldn't find that one, but the VIS Racing website lists a CF lower lip, looks like a replacement for the entire lower black plastic element. Part no. is 02BMMCS2DET-011C for $550. Their products always look nice in the photos, and I've seen one on a race MINI up close. Looked like a race part, not a concours street part, but maybe that's not the goal.
The one shown here looks cool, especially if it replaces the entire lower section on the front bumper.
The one shown here looks cool, especially if it replaces the entire lower section on the front bumper.
#5
it was on ebay and on some website...
http://cgi.ebay.com/ebaymotors/MINI-...QQcmdZViewItem
http://www.majesticmodifications.com...94bdae882a44da
http://cgi.ebay.com/ebaymotors/MINI-...QQcmdZViewItem
http://www.majesticmodifications.com...94bdae882a44da
#7
Trending Topics
#8
#9
#10
yah i dont think thats the actual picture of the piece meant for the MINI....it doesnt seem like it would fit on our bumper.
Interested in seeing what the actual piece is though
#15
#18
i just emailed DUZ takayanagi@design-unit-zone.com and sorted out the details....your cost will vary depending on type of shipping you choose....also, it's not an easy install...i needed a professional to do it
#19
#20
i just emailed DUZ takayanagi@design-unit-zone.com and sorted out the details....your cost will vary depending on type of shipping you choose....also, it's not an easy install...i needed a professional to do it
#22
Interesting...
So that's a longer lower lip?
Can a slitter be attached under that?
Also, What happens with the fenders, that version looks like it takes up part that the lower lip would have a fender attached to...
So that's a longer lower lip?
Can a slitter be attached under that?
Also, What happens with the fenders, that version looks like it takes up part that the lower lip would have a fender attached to...
#23
In all honesty, it looks like it just sits over the lower plastic spoiler (stuck on with adhesive?). My fathers Project Answer lip for his SC430 was the same way, except it was a urethane, and we molded it into his front bumper.
In regards to the splitter comment, it may work. I'd probably use M7 standard splitter, not the aero for this.
In regards to the splitter comment, it may work. I'd probably use M7 standard splitter, not the aero for this.
#24
True....I see what your saying.
Caps it all with Double sided.
So if you need to drill holes to but in a lower grille, I'm sure a splitter is no problem either.
Caps it all with Double sided.
So if you need to drill holes to but in a lower grille, I'm sure a splitter is no problem either.
In all honesty, it looks like it just sits over the lower plastic spoiler (stuck on with adhesive?). My fathers Project Answer lip for his SC430 was the same way, except it was a urethane, and we molded it into his front bumper.
In regards to the splitter comment, it may work. I'd probably use M7 standard splitter, not the aero for this.
In regards to the splitter comment, it may work. I'd probably use M7 standard splitter, not the aero for this.