Interior/Exterior LCI2 Side Indicators: Installed
#1
LCI2 Side Indicators: Installed
Hi all,
I took advantage of the 40 degree temperature today and installed the new style side indicators. I'm very impressed with them and would highly recommend this upgrade
: Quick Review :
- Compared to the '14-'21 side indicators the build quality has definitely improved.
- The gasket around the indicator makes a tight seal and there's three clips now instead of one.
- With the addition of the two clips the fitment is better and they don't have any movement/play.
* With my original side indicators and third-party ones they had a slight movement to them
- I love the mesh style/pattern they have, it mimics the same pattern on the grill and bumpers which ties in the design
- The LED is very bright and evenly lit/uniform
* The third-party dynamic ones I previously had installed had issues with some of the LEDs being dim/faded
- I wish that the DOT information wasn't printed directly on the lens but I'm sure its there for regulatory reasons...
Yes, I will miss the "37" scuttle inserts but now I don't have to worry about them getting damaged. After installation I used BimmerCode to code them.
Here are some pictures:
Have a great weekend,
Rich
I took advantage of the 40 degree temperature today and installed the new style side indicators. I'm very impressed with them and would highly recommend this upgrade
: Quick Review :
- Compared to the '14-'21 side indicators the build quality has definitely improved.
- The gasket around the indicator makes a tight seal and there's three clips now instead of one.
- With the addition of the two clips the fitment is better and they don't have any movement/play.
* With my original side indicators and third-party ones they had a slight movement to them
- I love the mesh style/pattern they have, it mimics the same pattern on the grill and bumpers which ties in the design
- The LED is very bright and evenly lit/uniform
* The third-party dynamic ones I previously had installed had issues with some of the LEDs being dim/faded
- I wish that the DOT information wasn't printed directly on the lens but I'm sure its there for regulatory reasons...
Yes, I will miss the "37" scuttle inserts but now I don't have to worry about them getting damaged. After installation I used BimmerCode to code them.
Here are some pictures:
Have a great weekend,
Rich
Last edited by RichsMINI; 02-18-2022 at 12:14 PM.
The following 3 users liked this post by RichsMINI:
#2
#3
I did order them from ECS and they had them in-stock at the time so I didn’t want to miss out.
The dynamic ones I had needed to go… fast. Some of the LEDs we’re going out and the “37” scuttle inserts were loose.
I tried to put 3M adhesive behind the “37” inserts but they never sat flush and I was always afraid of loosing them.
I cannot wait for you to receive them. The build quality is really incredible!
Rich
#4
I ordered the LCI2 side blinkers
S logo with Chrome tops.
https://www.ecstuning.com/b-genuine-...a/63179879003/
https://www.ecstuning.com/b-genuine-...a/63179879004/
It didn't have free shipping, but a quick chat with Jared at ECS, cleared that up!!
S logo with Chrome tops.
https://www.ecstuning.com/b-genuine-...a/63179879003/
https://www.ecstuning.com/b-genuine-...a/63179879004/
It didn't have free shipping, but a quick chat with Jared at ECS, cleared that up!!
Last edited by TVPostSound; 02-18-2022 at 06:07 PM.
The following users liked this post:
ECSTuning (02-23-2022)
#5
#6
#7
Sure, no problem
I’m off this coming Tuesday and will update this thread with multiple pictures.
Those 60th anniversary scuttle surrounds are sweet looking and it’s a nice MINI edition too.
My neighbor almost purchased one but it sold before he arrived
Until Tuesday,
Rich
The following users liked this post:
steelrat (02-20-2022)
Trending Topics
#8
The 60th doesnt have sheet metal changes.
Which one is yours?
Last edited by TVPostSound; 02-19-2022 at 03:57 PM.
#9
@TVPostSound Yes, that is correct photo of a 60th. I am worried about the shape changes on the lci2 ones.... The 60th markings around the scuttles, look too "fitted" to allow for the back edge of lci2......
@RichsMINI Thanks. Much appreciated. It's still too cold around here for installing stuff anyway. So I am not in a rush..... We got very lucky when I found ours. It was a bit of a drive to the dealership, but basically I saw on friday night, by saturday afternoon, the deal was done, and picked up the following weekend. only 19500kms on it..... They had several interested parties on the week in between.
Borrowed from ebay.... but it's the clearest photo
@RichsMINI Thanks. Much appreciated. It's still too cold around here for installing stuff anyway. So I am not in a rush..... We got very lucky when I found ours. It was a bit of a drive to the dealership, but basically I saw on friday night, by saturday afternoon, the deal was done, and picked up the following weekend. only 19500kms on it..... They had several interested parties on the week in between.
Borrowed from ebay.... but it's the clearest photo
Last edited by steelrat; 02-20-2022 at 12:08 PM.
#10
@TVPostSound Yes, that is correct photo of a 60th. I am worried about the shape changes on the lci2 ones.... The 60th markings around the scuttles, look too "fitted" to allow for the back edge of lci2.......
Last edited by TVPostSound; 02-20-2022 at 10:35 AM.
#11
@steelrat
Hi, I apologize for not being able to take the pictures today.
Yesterday my MINI went in for service and was told I needed to have the ECU updated... Now my MINI does not connect to MINI Connected Services so now the MINI shop foreman is reaching out to MINI/BMW HQ.
Here is the information from my paperwork: "Campaign Service Action SIM 12-01-21: Program Control Units (DME) 0012710500"
After this issue is resolved I will definitely have those pictures for you.
Have a great night,
Rich
Hi, I apologize for not being able to take the pictures today.
Yesterday my MINI went in for service and was told I needed to have the ECU updated... Now my MINI does not connect to MINI Connected Services so now the MINI shop foreman is reaching out to MINI/BMW HQ.
Here is the information from my paperwork: "Campaign Service Action SIM 12-01-21: Program Control Units (DME) 0012710500"
After this issue is resolved I will definitely have those pictures for you.
Have a great night,
Rich
#12
@RichsMINI
No worries. Use this as an opportunity. Tell them to upgrade your carplay to the new 2022 one while you are at it.
For mini connected the app for me works. I have found logging to the web site is a complete pain in the ***. On the .ca, it will let me login with my same account as the app. But it basically crashes, because it thinks I should have a lease or financing, but I don't. So try logging into the connected website, and see if that helps or hurts + upgrade your app?
Although your work order thing is talking about the sim card. Maybe you need a 5g upgrade on the car?
When I go for service before my stuff runs out in summer I was going to get them to "update" everything.... hopefully they will have this worked out by then....
No worries. Use this as an opportunity. Tell them to upgrade your carplay to the new 2022 one while you are at it.
For mini connected the app for me works. I have found logging to the web site is a complete pain in the ***. On the .ca, it will let me login with my same account as the app. But it basically crashes, because it thinks I should have a lease or financing, but I don't. So try logging into the connected website, and see if that helps or hurts + upgrade your app?
Although your work order thing is talking about the sim card. Maybe you need a 5g upgrade on the car?
When I go for service before my stuff runs out in summer I was going to get them to "update" everything.... hopefully they will have this worked out by then....
#13
#14
Yeah, realistically it upsets me that after the MINI technician did the update a functional test was not performed.
- It was just a long day, dropping off the MINI, picking it up, finding out it did not function then dropping it off again.
MINI still has no solution other than trying to reinstall the update. I guess we shall see...
Rich
- It was just a long day, dropping off the MINI, picking it up, finding out it did not function then dropping it off again.
MINI still has no solution other than trying to reinstall the update. I guess we shall see...
Rich
#15
Yeah, realistically it upsets me that after the MINI technician did the update a functional test was not performed.
- It was just a long day, dropping off the MINI, picking it up, finding out it did not function then dropping it off again.
MINI still has no solution other than trying to reinstall the update. I guess we shall see...
Rich
- It was just a long day, dropping off the MINI, picking it up, finding out it did not function then dropping it off again.
MINI still has no solution other than trying to reinstall the update. I guess we shall see...
Rich
Had the same issue with my 17, failed twice, third pass, I saw my car on the weekend, lights on, battery charger hooked up, with
their computer doing an update to the DME.
Apparently it takes hours to update.
Had a rental for a week on their gas and dime.
#16
@RichsMINI
No worries. Use this as an opportunity. Tell them to upgrade your carplay to the new 2022 one while you are at it.
For mini connected the app for me works. I have found logging to the web site is a complete pain in the ***. On the .ca, it will let me login with my same account as the app. But it basically crashes, because it thinks I should have a lease or financing, but I don't. So try logging into the connected website, and see if that helps or hurts + upgrade your app?
Although your work order thing is talking about the sim card. Maybe you need a 5g upgrade on the car?
When I go for service before my stuff runs out in summer I was going to get them to "update" everything.... hopefully they will have this worked out by then....
No worries. Use this as an opportunity. Tell them to upgrade your carplay to the new 2022 one while you are at it.
For mini connected the app for me works. I have found logging to the web site is a complete pain in the ***. On the .ca, it will let me login with my same account as the app. But it basically crashes, because it thinks I should have a lease or financing, but I don't. So try logging into the connected website, and see if that helps or hurts + upgrade your app?
Although your work order thing is talking about the sim card. Maybe you need a 5g upgrade on the car?
When I go for service before my stuff runs out in summer I was going to get them to "update" everything.... hopefully they will have this worked out by then....
Thanks, hopefully tomorrow I will get those pictures and the issue will be resolved...
Here's the deal:
The MINI app on iOS functions every now and then. Intermittently remote functions like lock/unlock do not work
- I cannot locate the MINI or send directions to the built-in navigation
- The miles on the car and remaining gas amount does not match the MINI's gauges
Inside the MINI I cannot turn on automatic date/time, vehicle tracking, get weather or news information
- I cannot change my service center, create a teleservice call or update MINI Services
I called MINI CR and was told they have a built-in SIM and it uses LTE. I did find out that the update was to fix a problem when codes not being stored in memory (example a CEL would be on but there would be no code details. This was told to me by my Service Advisor)
I should have four years no charge for MINI Connected Services and after there would be an annual fee
What's the MINI Connected website? I only new about MINI's Owners Lounge
Have a great day,
Rich
#17
Keeping my fingers crossed!
#18
Hi steelrat,
Here are the original style scuttles vs the newer style ones and yes the newer ones have a different shape to them and are a little larger
- With your MINI being the 60 years edition I would not want to remove those awesome scuttle surround plates
: Update of the MINI Connected Services Issue :
My Service Advisor explained to me that the shop foreman reached out to MINI HQ because there was another MINI with the same issue and it appears to be a server side problem that needs to be resolved and there's no ETA.
They would like to keep my MINI for four days, create an escalation, have an engineer look at the logs and reinstall the update again.
I'm going to hold off for a week and see if MINI resolves the server issue then proceed...
Have a great weekend and hope the pictures help,
Rich
Here are the original style scuttles vs the newer style ones and yes the newer ones have a different shape to them and are a little larger
- With your MINI being the 60 years edition I would not want to remove those awesome scuttle surround plates
: Update of the MINI Connected Services Issue :
My Service Advisor explained to me that the shop foreman reached out to MINI HQ because there was another MINI with the same issue and it appears to be a server side problem that needs to be resolved and there's no ETA.
They would like to keep my MINI for four days, create an escalation, have an engineer look at the logs and reinstall the update again.
I'm going to hold off for a week and see if MINI resolves the server issue then proceed...
Have a great weekend and hope the pictures help,
Rich
Last edited by RichsMINI; 02-25-2022 at 05:07 PM.
#19
Why thanks @RichsMINI for taking the time to get the comparo photos for me. I agree. I'd really love to get those 2022..... but I guess I'll have to wait to see if somebody aftermarkets a similary design in the old shape.
Hopefully mini can go ahead and fix it. Much like the logon server side issues, I hope.
Hopefully mini can go ahead and fix it. Much like the logon server side issues, I hope.
#20
@steelrat no problem and hopefully the aftermarket companies will come through
I’m happy to report that after eight days BMW/MINI resolved their server issue and this afternoon my MINI was able to connect to MINI Connected Services
I really did not want to leave my MINI with the service department for four/five days. So happy it’s over
Rich
*ps there’s a great company www.smps2012.com and they make great MINI accessories. Maybe reach out to them and inquire about the side markers
I’m happy to report that after eight days BMW/MINI resolved their server issue and this afternoon my MINI was able to connect to MINI Connected Services
I really did not want to leave my MINI with the service department for four/five days. So happy it’s over
Rich
*ps there’s a great company www.smps2012.com and they make great MINI accessories. Maybe reach out to them and inquire about the side markers
#22
Mine are finally in the mail!!!
https://www.ecstuning.com/b-genuine-...a/63179879003/
Knowing ECS, those are the pictures above of mine, because they always inspect and photgraph
the first ones in!!
ECS, using a white drop, causes the chrome to reflect as white!!!
(They better be chrome!!)
https://www.ecstuning.com/b-genuine-...a/63179879003/
Knowing ECS, those are the pictures above of mine, because they always inspect and photgraph
the first ones in!!
ECS, using a white drop, causes the chrome to reflect as white!!!
(They better be chrome!!)
#23
They look like the chrome on top. Thats just shot on a white background.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#25
Hi all,
I took advantage of the 40 degree temperature today and installed the new style side indicators. I'm very impressed with them and would highly recommend this upgrade
: Quick Review :
- Compared to the '14-'21 side indicators the build quality has definitely improved.
- The gasket around the indicator makes a tight seal and there's three clips now instead of one.
- With the addition of the two clips the fitment is better and they don't have any movement/play.
* With my original side indicators and third-party ones they had a slight movement to them
- I love the mesh style/pattern they have, it mimics the same pattern on the grill and bumpers which ties in the design
- The LED is very bright and evenly lit/uniform
* The third-party dynamic ones I previously had installed had issues with some of the LEDs being dim/faded
- I wish that the DOT information wasn't printed directly on the lens but I'm sure its there for regulatory reasons...
Yes, I will miss the "37" scuttle inserts but now I don't have to worry about them getting damaged. After installation I used BimmerCode to code them.
Here are some pictures:
Have a great weekend,
Rich
I took advantage of the 40 degree temperature today and installed the new style side indicators. I'm very impressed with them and would highly recommend this upgrade
: Quick Review :
- Compared to the '14-'21 side indicators the build quality has definitely improved.
- The gasket around the indicator makes a tight seal and there's three clips now instead of one.
- With the addition of the two clips the fitment is better and they don't have any movement/play.
* With my original side indicators and third-party ones they had a slight movement to them
- I love the mesh style/pattern they have, it mimics the same pattern on the grill and bumpers which ties in the design
- The LED is very bright and evenly lit/uniform
* The third-party dynamic ones I previously had installed had issues with some of the LEDs being dim/faded
- I wish that the DOT information wasn't printed directly on the lens but I'm sure its there for regulatory reasons...
Yes, I will miss the "37" scuttle inserts but now I don't have to worry about them getting damaged. After installation I used BimmerCode to code them.
Here are some pictures:
Have a great weekend,
Rich