Interior/Exterior Ram intake project
#76
They're mounted to factory mounts.
Skuzy, don't know about shipping anywhere yet as we haven't decided on production. Stuff underhood? The usual suspects...WMS head/valve/Schrick cam, 62mm TB, Alta TMIC/15% pully, M7 AGS/OCC, Miltek header, modified Borla, Spec clutch, Fidanza FW, Quaife LSD...
Skuzy, don't know about shipping anywhere yet as we haven't decided on production. Stuff underhood? The usual suspects...WMS head/valve/Schrick cam, 62mm TB, Alta TMIC/15% pully, M7 AGS/OCC, Miltek header, modified Borla, Spec clutch, Fidanza FW, Quaife LSD...
Originally Posted by chows4us
MSFIToy
I know this is OT a bit but your Fogs (assuming their fogs). what are they mounted to?
I know this is OT a bit but your Fogs (assuming their fogs). what are they mounted to?
#77
#78
They're mounted to a set of 3x3 L stainless steel brackets that is bolted to the bumper beam. Very rigid. I got it from McMasters but haven't been able to locate them again. Might've been discontinued.
Originally Posted by chows4us
OK, not the fogs, the BIG lights down low. I assumed they were fogs because fogs go low, driving lights go high. How about the big lights, what are they mounted to?
#80
#81
Originally Posted by MSFITOY
They're mounted to a set of 3x3 L stainless steel brackets that is bolted to the bumper beam. Very rigid. I got it from McMasters but haven't been able to locate them again. Might've been discontinued.
same idea, bolt directly to the bumper. Solid as a rock!
#82
I like those Mine was around $12:smile:
Originally Posted by chows4us
Very nice. I got a pair of these http://outmotoring.com/mini_cooper_d..._brackets.html
same idea, bolt directly to the bumper. Solid as a rock!
same idea, bolt directly to the bumper. Solid as a rock!
#85
Originally Posted by MSFITOY
I found it online a while back but don't know where now. They had a difficult time getting it and told me that it was discontinued.
Second, in the picture underhood of the the bonnet, do you usually store a quart of oil in the space between the engine and firewall??
#86
#87
#88
Originally Posted by MSFITOY
Skuzy, don't know about shipping anywhere yet as we haven't decided on production. Stuff underhood? The usual suspects...WMS head/valve/Schrick cam, 62mm TB, Alta TMIC/15% pully, M7 AGS/OCC, Miltek header, modified Borla, Spec clutch, Fidanza FW, Quaife LSD...
well ill be watching this thread closely to see if production does happen.
Cheers mate and g'luck!
#93
I want one too !
Once you finish the design work maybe you should contract it out to ALTA or one of the other aftermarket companies? I think alot of people would be interested in this mod. Unlike the M7 scoop, it really fits the design of the car, and enhances it. It looks great, nice job!
#95
#99