Interior/Exterior How to: Schroth Quick Fit Harness w/Pics
#1
04-27-2006 | 01:06 PM
Thread Starter
|
5th Gear
Joined: Feb 2006
Posts: 753
Likes: 0
From: Scottsdale, Arizona
How to: Schroth Quick Fit Harness w/Pics
For those of you who have questions about the install
These are pictures of a passenger side install:
The inside lap harness connects directly to the factory fastener.
Bolt the outside lap harness bracket to the front factory belt lower mount.
The rear inside harness piece connects directly to the factory fastener.
Bolt the outside rear harness bracket to the rear outside seat belt mount.
There are the 2 pieces that remain in the car when you remove the harness.
Please do not hesitate to call us if you have any question
thanks
Victor
These are pictures of a passenger side install:
The inside lap harness connects directly to the factory fastener.
Bolt the outside lap harness bracket to the front factory belt lower mount.
The rear inside harness piece connects directly to the factory fastener.
Bolt the outside rear harness bracket to the rear outside seat belt mount.
There are the 2 pieces that remain in the car when you remove the harness.
Please do not hesitate to call us if you have any question
thanks
Victor
Last edited by Mini Works; 04-28-2006 at 12:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ebowling
R50/R53 :: Hatch Talk (2002-2006)
90
08-04-2019 09:15 AM