JCW 2012 R58 JCW Shifting problem after manic tune
#1
2012 R58 JCW Shifting problem after manic tune
Hello all,
I'm having a problem shifting up while under load after manic stage 2 tune. One of two things happen, the shifter either feels heavy while engaging, or it wont go into gear at all (locked out). I've had this happen in every gear and only under heavy acceleration. I don't know if this could be self inflicted by shifting too slow or before the clutch fully disengages. Will try double clutching when I get a chance. Has anyone experience this? or does anyone have an idea of what the issue might be? Thanks in advance!
I'm having a problem shifting up while under load after manic stage 2 tune. One of two things happen, the shifter either feels heavy while engaging, or it wont go into gear at all (locked out). I've had this happen in every gear and only under heavy acceleration. I don't know if this could be self inflicted by shifting too slow or before the clutch fully disengages. Will try double clutching when I get a chance. Has anyone experience this? or does anyone have an idea of what the issue might be? Thanks in advance!
#2
Have an R58 JCW also, I would check the reservoir fluid and also check the slave cylinder first. If you have a leak or for some reason bled or flushed the system and still have air.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#3
Thanks for the advise! The reservoir is full and I physically inspected the slave cylinder and did not show sings of leaking. Ordered some ATE brake fluid to bleed the slave cylinder...figure it wont hurt to do so.
Last edited by rtorres253; 03-20-2018 at 07:37 AM.
#4
ok, thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
IQRaceworks
JCW Garage
9
02-13-2019 09:18 AM
randeez
Drivetrain (Cooper S)
48
04-03-2017 11:28 AM
HighSchoolzMINI
R50/R53 :: Hatch Talk (2002-2006)
15
10-21-2006 11:47 AM