When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
10/6/21 update...complete part out. Check back here for more parts before I scrap it.
The Getrag 6 speed has an MFactory helical LSD installed.
The engine has a newly rebuilt head, new Facet thermostat, Facet ignition coils, VNE oil pump, Forge hoses, CP pistons and AEM intake.
The car has 112k miles but there is less than 20 miles on many of these parts.
I believe there is an issue with the block. It currently runs and drives but uses coolant and eventually starts to overheat.
Buyers are welcome to inspect and try before you buy.
I have added videos of the startup and engine running as parts are now being removed.
If you are looking for something in the engine bay that's not listed, message me.
I will be adding to this listing, prices are OBO.
GS6-53BG
Transmssion with LSD, fits 07-10 cars for sure.
The Mfactory MF-TRS-05MIN limited slip
fits ALL years 07-14, and could be removed.
The only difference is the newer cars use a different
flywheel, but this one fits those engines.
(Clutch, axles, starter, shift linkage are the same 07-14.)
Sold
Carillo CP forged pistons SC7515
Engine - Internals
$400
Standard 77mm, 10.5 compression ratio
Sold
42mm Alta K03 turbo
Engine - Intake/Fuel
$250
Germany made, Borg Warner K03.
This is supposed to be an Alta 42MM
You can see the machined billet turbine wheel.
There is some visible wear, working when removed.
Sold
PLM catless downpipe 2.5"
Engine - Exhaust
$100
Hi flow downpipe 2.5"
Heat wrapped, new oem clamp.
Add $50 for both o2 sensors.
one is a new NTK.
Includes spacers.
Sold
AEM intake
Engine - Intake/Fuel
$300
AEM ram air cold air intake
Like new Bosch MAF add $70
Sold
Forge turbo to intercooler hose, black
Engine - Intake/Fuel
$80
Hot side hose, 'resonator delete' price includes shipping.
Sold
Forge noise delete intake hose, blue
Engine - Intake/Fuel
$50
Cold side intake hose, deletes noise maker and metal
coupling.
Price includes shipping.
Sold
Reman Head
Engine - Internals
$600
Done by the most reputable machine shop in the area, Benning Auto Parts in Columbus. Has timing holder tools in place.
Timing tools and ARP hardware included.
Last edited by zrickety; 10-06-2021 at 09:09 AM.
Reply
you sure it is the block and not the thermostat housing or a oring? Mine was going down and it turned out to be the housing was leaking.
Yes, thanks. I replaced the housing, the pipe, the o-rings, etc etc. On top of that there is a P1497 with new gaskets, hoses and valve cover. I'm done throwing money at this engine.
Got the turbo off and added more pics above. You can see the machining on the wheel. I have attached a pic from Alta for comparison. My turbo Alta pic ALTA Billet 56 Turbo Upgrade | PERRIN Performance
I tried to reply to your message but your mailbox is full.
The car was running and driving, there were no turbo related engine codes. I don't think it needs a rebuild.
I took some measurements and estimate shipping at $40 with FedEx. I'll include the copper washers and bolts that go to the cooling and oil lines. Also the exhaust manifold gasket was new and torqued properly, you could probably reuse that too.
Ricky
02-11-2021 | 09:34 AM
