FS:: OEM JCW 380cc Injectors
#1
11-13-2012, 01:37 PM
OEM JCW 380cc Injectors
Category: Drivetrain
Price: $300
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R53
Location (Region): West
Item Condition: Used
Comes complete with original dust seals, wrapping, and boxes.
Price includes shipping within lower 48.
PayPal payment preferred.
Please inquire via bahmoni1@gmail.com
Last edited by bahman; 11-13-2012 at 02:07 PM. Reason: Corrected price
#6
12-22-2012, 08:33 AM
1st Gear
Join Date: Nov 2012
Location: Littleton CO
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
will these work on a 05 stock S that is getting a pully and colder plugs? What else would I need to do.
#7
12-22-2012, 02:20 PM
I had these on an '06 MCS with 15% pulley, Dinan CAI, and colder plugs, and worked great; however, it was optimized by an RMW dyno tune, which I highly recommend.
Trending Topics
#8
12-24-2012, 11:57 AM
1st Gear
Join Date: Nov 2012
Location: Littleton CO
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Where is RMW Dyno located? I'm in SW littleton so an hour or so. I plan on doing what you dud but a 17* pulley instead. What was the cost for the Dyno?
#9
12-24-2012, 12:39 PM
Hi, Tom.
RMW stands for Revolution Motor Works (they have a web site), and the owner/person who performs the tuning is Jan Bruggeman(?). The MINI5280 guys (Don Suter, current president) had him come over here from CA to do it over 2 days for some 15 people, including me. My car produced 210 HP at the wheel. If you are into modding, I highly recommend a dyno tune - it sort of optimizes everything together.
The place where the dyno was is called MAC Autosport in Parker, CO. They charged $150 for 3 dyno pulls, and Jan charged $350 for software mods, total $500.
You may want to contact Don and he can get you more info.
Please use my email address bahmoni1@gmail.com going forward. Much easier format, and I check it more often.
Good luck,
Bahman
RMW stands for Revolution Motor Works (they have a web site), and the owner/person who performs the tuning is Jan Bruggeman(?). The MINI5280 guys (Don Suter, current president) had him come over here from CA to do it over 2 days for some 15 people, including me. My car produced 210 HP at the wheel. If you are into modding, I highly recommend a dyno tune - it sort of optimizes everything together.
The place where the dyno was is called MAC Autosport in Parker, CO. They charged $150 for 3 dyno pulls, and Jan charged $350 for software mods, total $500.
You may want to contact Don and he can get you more info.
Please use my email address bahmoni1@gmail.com going forward. Much easier format, and I check it more often.
Good luck,
Bahman
Thread
Thread Starter
Forum
Replies
Last Post
blackie
MINI Parts for Sale
52
10-02-2015 07:41 PM
