WTB:: Joey Mod RH ‘05-‘08 Headlight
#1
Joey Mod RH ‘05-‘08 Headlight
Category: Lights
Price: $259
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R50, R52, R53
Location (Region): Texas
Item Condition: Used
Looking for a Joey Mod RH post-facelift headlight in VG- Excellent condition.
Alternatively, will buy a pair at $500
if none can be sourced in 3 months, I will sell my LH unit which is in excellent condition, and the RH unit which has broken internals for $400, plus shipping.
Alternatively, will buy a pair at $500
if none can be sourced in 3 months, I will sell my LH unit which is in excellent condition, and the RH unit which has broken internals for $400, plus shipping.
#2
Did you see these: https://www.northamericanmotoring.co...eadlights.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#3
Joey Mod
Did you see these: https://www.northamericanmotoring.co...eadlights.html
Thank you for the tip. I would like to stay with OE headlights, including headlight washers. The Joey Mod lights look awesome on my triple-black '05 R53, except that the internals of one of them is busted (don't know how.)
#4
Welcome, understand. Whats busted about it, do you have a pic?
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#5
I don't have pictures but the tabs attaching the lower rings and bulb holder to the main light body are broken, and the sub-assembly is dangling inside. I disassembled the headlight but could not remove and repair the sub-assembly. It can be a good spare for someone.
#6
Oh ok, yes i know what you mean, there is a pivot ball joint also in there that can pop out or break, you could bake it and take it apart and gorilla glue it.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Trending Topics
#8
Possible fix
Bachman,
not sure if this will be helpful to you, but I had an own xenon assembly that I bought, where the bulb was facing down and was loose.
i fished some string around the front of the bulb inside the housing. I did not remove the lens. So the loop of string went in from the back and also came out the back. I then yanked up on the string to pull the assembly back on the ball socket post. I then pulled out the sting.
maybe this is helpful or maybe it is not. I either case, best of luck to you.
not sure if this will be helpful to you, but I had an own xenon assembly that I bought, where the bulb was facing down and was loose.
i fished some string around the front of the bulb inside the housing. I did not remove the lens. So the loop of string went in from the back and also came out the back. I then yanked up on the string to pull the assembly back on the ball socket post. I then pulled out the sting.
maybe this is helpful or maybe it is not. I either case, best of luck to you.
#9
Cruiser77,
Thank you for the great innovation and advice. Unfortunately in my case, the plate with 4 screws that attaches the bulb housing to the frame is broken in two places and cannot be secured. Probably cracked/broken during the initial Joey Mod procedure.
I appreciate your considerate suggestion.
Bahman
Thank you for the great innovation and advice. Unfortunately in my case, the plate with 4 screws that attaches the bulb housing to the frame is broken in two places and cannot be secured. Probably cracked/broken during the initial Joey Mod procedure.
I appreciate your considerate suggestion.
Bahman
Thread
Thread Starter
Forum
Replies
Last Post
Interior/Exterior Joey Mod 03' Xenon Headlight Help!
GumbyLara
Interior/Exterior
44
03-02-2011 08:04 PM
Interior/Exterior Half Joey Mod On PW/B Mini (just headlight rings)
futureal33
Interior/Exterior
8
10-21-2008 10:29 PM
Interior/Exterior Painting Headlight Housing (aka Joey Mod)
chikmagnet
Interior/Exterior
252
01-06-2008 07:17 PM