|
Originally Posted by Dr Obnxs
(Post 1961820)
Edge motor works in Dublin, A&E in cupertino, Bay Bridge in Oakland (I think... PM Jimz68 for a few more).
Where do you live? Matt ps, add me to the list..... |
edit. double post.
|
Originally Posted by mikenaron
(Post 2021067)
is there still room on this one? looks like our mid-cal tune may be pushed out a bit. If there is, I'd like to squeeze in.. :)
|
Sharo,
Thanks for doing the leg-work and coordinating with the shops. :thumbsup: Please let us know if you need some help. Was the price/hour of the dyno discussed with this shop?
Originally Posted by SharoSC02
(Post 2021049)
OK Rose :) I fixed it.
OK so the latest update is the shop that I have contacted has to let us know when and if they can host this event. So waiting for their response. Here is the link for this particular shop: http://www.goodies-speedshop.com/2007/index.html Hopefully this will work with them but if not we have to find another one. I know there are few shops mentioned earlier and I will try contacting them one at a time If this doesn't work with the above linked shop. |
Originally Posted by latte hiatus
(Post 2021698)
Sharo,
Thanks for doing the leg-work and coordinating with the shops. :thumbsup: Please let us know if you need some help. Was the price/hour of the dyno discussed with this shop? The shop's owner is suppose to contact me with possible dates and hourly dyno charge. I have talked to Jan, his tunning price is $350.00 per car then there is the price of the 1 hour per car/member we have to pay the shop for the dyno use, whatever that price is, is yet to be determined by the shop owner. |
The rates at Goodies Speed Shop: http://www.goodies-speedshop.com/200..._Services.html. What would apply to an RMW tune?
Dyno Prices Basic Dyno Test including Horsepower and Torque printouts (up to 3 pulls) $130 Dyno Tuning for Carburetor and Ignition $150/hour + $80 Load/Unload fee for over 1 hour of total time Dyno Tuning/Programming EFI$175/hour + $80 Load/Unload fee for over 1 hour of total time Add $40 per session/day for Wide band 02 usage/readings Add $45 install fee weld-in 02 bung for wide band sensor |
Originally Posted by rkw
(Post 2021776)
The rates at Goodies Speed Shop: http://www.goodies-speedshop.com/200..._Services.html. What would apply to an RMW tune?
|
Originally Posted by SharoSC02
(Post 2021781)
I think those would be for per one car basis pricing. However, I'm thinking/hoping that the pricing could be different/lower when there are multiple cars in a package deal. :grin:
|
You can pull me from the list. I'm going to wait on the tune. Need the $$$ for camera gear.
Jim |
Originally Posted by JIMINNI
(Post 2022081)
Hi, I'm just wondering if you guy's actually have a set date that Jan is comming up there? We are kinda in limbo down here in Fresno. Just wondering, thanks.
I feel like koo koo clock. :lol: |
Originally Posted by jimz68
(Post 2022092)
You can pull me from the list. I'm going to wait on the tune. Need the $$$ for camera gear.
Jim |
Originally Posted by SharoSC02
(Post 2022341)
Please read through the recent posts in this thread. As I have stated few times already in earlier posts above, no dates confirmed yet. The shop and Jan need to get the timing down. :)
I feel like koo koo clock. :lol: |
Would it be too optimistic for me to presume that Jupiter has aligned with Mars and this will be happening in the latter part of this week? I'm just itching to see what Jan can do with our cars!
|
OK some updates,
The shop is ready to go as long as we can get them one week notice. Therefore Jan needs to let us all know when he can come up here in the next 2-3 weeks perhaps and we are good to go. The cost and deposits issue I will leave to Jan in how he wants to have this taken care of. Also, I know this has taken more time to develop than expected but by the way Jan is being asked to travel all over country, just like as a ROCK STAR, :lol: to bless everyone with his tune we have to be patient and grateful that this will hopefully come to fruitation soon. |
Thanks, Sharo!
Since you're the de facto contact person with Jan for this group, would you mind coordinating with his schedule for our tune? Jan doesn't need all of us impatient types bombarding him with individual messages. :lol: Got a new serpentine belt, new engine oil, new spark plugs, and a slightly used W2A IC, and I am rearing for the tune and rooting for next week if possible! :thumbsup: |
Originally Posted by latte hiatus
(Post 2032825)
Thanks, Sharo!
Since you're the de facto contact person with Jan for this group, would you mind coordinating with his schedule for our tune? Jan doesn't need all of us impatient types bombarding him with individual messages. :lol: Got a new serpentine belt, new engine oil, new spark plugs, and a slightly used W2A IC, and I am rearing for the tune and rooting for next week if possible! :thumbsup: OK kidding aside, I'm not sure about being the de facto thingi, but I'm on top of everything right now. Just need Jan to tell us when and we're good to go. :thumbsup: |
OK just hung up the phone with Jan. He is very very busy as usual. Planning on going to Hawaii tomorrow and will be back on Monday the 18th. He said he is also working on some racing stuff and after that he would like to take few days off.
We will revisit the timing issue next week when he comes back to set the date. I'm only going to guess and say that it looks as if it "could", don't hold me on this" be the end of this month and perhaps even the 1st week of March. So, cross your fingers everyone and thank you for being patient. Sharo |
It seems I've heard something like this before, but there were flying monkeys in the story & it went something like this "No one gets into see the wizard, not no how,not no way.:lol: :nod: hope it happens before AMVIV.
|
Can you please add me to the list :)
Do we have a general location... or, narrowed down to a couple locations? Just wondering what kind of drive to prepare for, :grin: |
Originally Posted by TWON
(Post 2039708)
Can you please add me to the list :)
Do we have a general location... or, narrowed down to a couple locations? Just wondering what kind of drive to prepare for, :grin: Here is the link: http://www.goodies-speedshop.com/2007/index.html |
Originally Posted by SharoSC02
(Post 2039604)
We will revisit the timing issue next week when he comes back to set the date. I'm only going to guess and say that it looks as if it "could", don't hold me on this" be the end of this month and perhaps even the 1st week of March.
...Unfortunately, I'm not quite sure what that means... :sly: Thanks for coordinating with Jan's schedule! |
Weekend of 2/29-30 could work for me.
|
. . . one more for the list??
Hi,
latte hiatus just told me about this upcoming SF Bay Area tuning opportunity. Cool! :thumbsup: If there are still slots left, please add me to the list! Thanks! |
Location??
- San Jose is closest to me, so getting in on one of the sessions at Goodies would be best for me.
|
Once I get a final commitment from Jan I will redo the list. I like to know if everyone on the list will be ready once we get Jan to confirm the date with us.
|
Originally Posted by SharoSC02
(Post 2056130)
Once I get a final commitment from Jan I will redo the list. I like to know if everyone on the list will be ready once we get Jan to confirm the date with us.
can we do the 6th and 7th of March? If so..... let's do it:thumbsup: |
7th of March should work for me. 6th is out.
|
Originally Posted by SharoSC02
(Post 2056130)
Once I get a final commitment from Jan I will redo the list. I like to know if everyone on the list will be ready once we get Jan to confirm the date with us.
|
I am available both the 6th and 7th, so you can work me around others needs, :thumbsup:
|
Either the Sixth or Seventh is good for me
|
Hey sandini, I live about 5 minutes from you. If we end up going about the same time, we can meet up and caravan down together.
|
Thanks for setting the dates, Jan!
Either the 6th or 7th works great for me. Let's do it! :thumbsup: |
Originally Posted by Revolution Mini Works
(Post 2056516)
can we do the 6th and 7th of March?
If so..... let's do it:thumbsup: |
RMW Bay Area Tuning Session
Sharo,
March 6 or 7 works for me. Thanks!! |
Few posters that for some reason I can't find in this thread are:
Nabshin brownflyer custard howsoonisnew A4blur jrlombard Posers mentioned above, if you can still make it be sure to post a reply here since I can't find you in this thread. The dates are tentatively on March 6th & 7th. |
So here is the entire list with members that have confirmed the dates and that they can make it:
1-SharoSC02--->Confirmed 2-Nabashin 3-tazio 4-brownflyer---->Confirmed 5-70spop 6-custard 7-howsoonisnow1985 8-A4blur--------->Confirmed "Friday March 7th Session" 9-kmickey------->Confirmed 10-sandini------->Confirmed 11-rkw----------->Confirmed "Friday March 7th session" 12-kazlot-------->Confirmed 13-yumhaggis--->Confirmed 14-latte hiatus--->Confirmed 15-MINICHEF----->Pending confirmation 16-Checkers------>Confirmed 17-SCA 18-chengchiro----->pending confirmation "Friday March 7th session" 19-pattorres 20-Dr O. 21-mikenaron---->Confirmed 22-Twon---------->Confirmed 23-Mikenaron---->Confirmed |
Originally Posted by Revolution Mini Works
(Post 2056516)
can we do the 6th and 7th of March?
If so..... let's do it:thumbsup: Unfortunately I'll be traveling March 4 thru 19, and won't be able to make a tune session on March 6-7. :cry: |
Originally Posted by Mini_Crazy
(Post 2057558)
This started out as a January tune session, and February was fine too. :confused:
Unfortunately I'll be traveling March 4 thru 19, and won't be able to make a tune session on March 6-7. :cry: Jan has been super super busy and it's been very hard to get him to come up here. We would have loved to have you make the event however. And again, I do apologize for having this take longer than expected. Jan is a super star now and is wanted everywhere. Jan, can we clone you by any chance?? :lol: Thanks everyone for being patient enough to do this. I can't thank everyone enough for hanging in there. We still need to get more confirmations from everyone. I have sent everyone a PM accept for couple of people and you know who you are. :grin: Sharo |
No can do for this guy. Just got confirmation that I have jury duty on Thurs (6th), which may spill over in to Friday.
:sad: I certainly understand Jan's limitations, but I was hoping that we could have gotten this done sooner.... |
I'm in Checkers is up and running. Just let me know what day 6th or 7th. All I have to do is get the new RMW cam installed and put 500 miles on the new motor.
|
| All times are GMT -7. The time now is 08:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands