R50/53 PS Leak DIY?
#2
Where is the pump leaking? From the hose connection or the hose itself.
Here is a diagram so you can point to the location.
Thanks
Here is a diagram so you can point to the location.
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#3
#4
#5
Looks like the #1 line .
The lines can be squeezed a little and indented and then with you add a new MINI part hose clamp it will leaks again.
Its the intake line and should be the short hose.
Here is a link to check for additional leaks:
https://www.northamericanmotoring.co...hose-pics.html
Check both lines to be sure they are not both leaking. Here is the clamps also , best to check both and replace also.
#1
http://www.ecstuning.com/Search/32416754498/ES54931/
Clamps top and bottom #2
http://www.ecstuning.com/Search/32111131345/ES51766/
&
#11
http://www.ecstuning.com/Search/32416781744/ES55231/
Here is the top clamp: for #11
http://www.ecstuning.com/Search/16121180242/ES36557/
Thanks
Hope that helps and let know what you want.
The lines can be squeezed a little and indented and then with you add a new MINI part hose clamp it will leaks again.
Its the intake line and should be the short hose.
Here is a link to check for additional leaks:
https://www.northamericanmotoring.co...hose-pics.html
Check both lines to be sure they are not both leaking. Here is the clamps also , best to check both and replace also.
#1
http://www.ecstuning.com/Search/32416754498/ES54931/
Clamps top and bottom #2
http://www.ecstuning.com/Search/32111131345/ES51766/
&
#11
http://www.ecstuning.com/Search/32416781744/ES55231/
Here is the top clamp: for #11
http://www.ecstuning.com/Search/16121180242/ES36557/
Thanks
Hope that helps and let know what you want.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#6
shop told me #11 hose was leaking. Checked back with my buddy who discovered it. #11a the most expensive. Now, are there any instructionals on how to perform the swap? I'm guessing a lift is preferred and other than that it is' just removing and replacing.then refilling with new fluid. The post you provided was very helpful visually! Thanks for your help!
Last edited by RHcoopers; 04-25-2013 at 03:36 PM. Reason: added notes
#7
Where can I find the tool to install those clamps? Or can I use the regular hose clamps that screw tighten. I am getting ready to replace the #1 hose after I place my order with you. Even with the #11 hose dry as a bone (no leaks) should I replace that hose at the same time. My 06S just flipped 65,000 miles. Thanks
Looks like the #1 line .
The lines can be squeezed a little and indented and then with you add a new MINI part hose clamp it will leaks again.
Its the intake line and should be the short hose.
Here is a link to check for additional leaks:
https://www.northamericanmotoring.co...hose-pics.html
Check both lines to be sure they are not both leaking. Here is the clamps also , best to check both and replace also.
#1
http://www.ecstuning.com/Search/32416754498/ES54931/
Clamps top and bottom #2
http://www.ecstuning.com/Search/32111131345/ES51766/
&
#11
http://www.ecstuning.com/Search/32416781744/ES55231/
Here is the top clamp: for #11
http://www.ecstuning.com/Search/16121180242/ES36557/
Thanks
Hope that helps and let know what you want.
The lines can be squeezed a little and indented and then with you add a new MINI part hose clamp it will leaks again.
Its the intake line and should be the short hose.
Here is a link to check for additional leaks:
https://www.northamericanmotoring.co...hose-pics.html
Check both lines to be sure they are not both leaking. Here is the clamps also , best to check both and replace also.
#1
http://www.ecstuning.com/Search/32416754498/ES54931/
Clamps top and bottom #2
http://www.ecstuning.com/Search/32111131345/ES51766/
&
#11
http://www.ecstuning.com/Search/32416781744/ES55231/
Here is the top clamp: for #11
http://www.ecstuning.com/Search/16121180242/ES36557/
Thanks
Hope that helps and let know what you want.
Trending Topics
#8
#9
Funny how your garage will fill up with so many "spare" parts from swapmeets that were great deals for "if or when" you need them....
Thread
Thread Starter
Forum
Replies
Last Post