North American Motoring

R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 OBD test port

Thread Tools
 
Search this Thread
 
  #1  
Old 09-03-2013 | 09:43 AM
Blayne's Avatar
Blayne
Thread Starter
|
2nd Gear
Joined: Nov 2012
Posts: 55
Likes: 0
From: Sudbury, Ontario Canada
OBD test port
Where is the test plug in for the scan tool on the Mini? Never had to use it before. It doesn't seem to be in the normal location for most cars.

Thanks
 
Reply Like
  #2  
Old 09-03-2013 | 11:39 AM
Wheetie's Avatar
Wheetie
1st Gear
Joined: May 2013
Posts: 28
Likes: 0
From: MO
down near the Bonnet release latch under the dash. Mine has a plastic cover on it so you have to look for it...cant feel around to find it
 
Reply Like
  #3  
Old 09-03-2013 | 12:01 PM
JAB 67's Avatar
JAB 67
6th Gear
iTrader: (1)
Joined: Oct 2006
Posts: 2,659
Likes: 60
From: Fairfax, VA
Not sure about that location suggested by Wheetie - I seem to recall it being under the dash above the left knee.
 
Last edited by JAB 67; 09-03-2013 at 12:01 PM. Reason: typo
Reply Like
  #4  
Old 09-03-2013 | 01:15 PM
Wheetie's Avatar
Wheetie
1st Gear
Joined: May 2013
Posts: 28
Likes: 0
From: MO
(@ Jab)I think we are saying the same thing with different words.
 
Reply Like
  #5  
Old 09-03-2013 | 01:20 PM
JAB 67's Avatar
JAB 67
6th Gear
iTrader: (1)
Joined: Oct 2006
Posts: 2,659
Likes: 60
From: Fairfax, VA
Wheetie - no we aren't because on my 2004 MCS the bonnet release is on the passenger's side, not driver's. Note that the original poster put this in the First Generation forum.
 
Last edited by JAB 67; 09-03-2013 at 01:21 PM. Reason: typo
Reply Like
  #6  
Old 09-03-2013 | 01:23 PM
Wheetie's Avatar
Wheetie
1st Gear
Joined: May 2013
Posts: 28
Likes: 0
From: MO
you are right...good catch.
 
Reply Like
  #7  
Old 09-03-2013 | 01:49 PM
ECSTuning's Avatar
ECSTuning
Platinum Sponsor
Joined: Jan 2013
Posts: 35,393
Likes: 2,135
From: Wadsworth, Ohio
Yep its on the driver side ( foot well ) right at the bottom left behind the panel #19.



Trim Panel Below Panther Black - Driver Side #19


http://www.ecstuning.com/Search/SiteSearch/51167064419/

Thankls
 
__________________

MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Reply Like

Trending Topics

  #8  
Old 09-03-2013 | 03:27 PM
joylove's Avatar
joylove
5th Gear
Joined: Sep 2012
Posts: 699
Likes: 7
By regulation it has to be close to the driver's side footwell.
 
Reply Like
  #9  
Old 09-03-2013 | 05:09 PM
Blayne's Avatar
Blayne
Thread Starter
|
2nd Gear
Joined: Nov 2012
Posts: 55
Likes: 0
From: Sudbury, Ontario Canada
Ok thanks guys. I did take a look but didn't see it. I will take another look. I know it's suppose to be in there. But before the Mini I had never seen a good release on the pass side either lol.
 
Reply Like
  #10  
Old 09-03-2013 | 06:15 PM
ZippyNH's Avatar
ZippyNH
6th Gear
iTrader: (1)
Joined: Sep 2009
Posts: 12,605
Likes: 36
From: Southern NH
Originally Posted by Blayne
....... But before the Mini I had never seen a good release on the pass side either lol.
Lol....sounds kinda dirty!!
Oh...HOOD RELEASE......

The odb2 port is kinds hard to spot.... The cover makes it kinda hidden...
 
Reply Like
  #11  
Old 09-03-2013 | 07:33 PM
OldGameFreaK's Avatar
OldGameFreaK
4th Gear
iTrader: (1)
Joined: Feb 2011
Posts: 477
Likes: 1
From: Tempe, AZ
@ECStunning what panel is #15?
 
Reply Like
  #12  
Old 09-03-2013 | 09:43 PM
rkw's Avatar
rkw
OVERDRIVE
Joined: May 2005
Posts: 8,233
Likes: 123
From: San Francisco
Originally Posted by OldGameFreaK
@ECStunning what panel is #15?
It's the European version that has a storage cubby. Not available in the U.S.

 
Reply Like
  #13  
Old 09-04-2013 | 06:11 AM
ZippyNH's Avatar
ZippyNH
6th Gear
iTrader: (1)
Joined: Sep 2009
Posts: 12,605
Likes: 36
From: Southern NH
Which is even different than the euro parcel shelf....
 
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Navigation & Audio HK Replacement With New Components
Filmy
Navigation & Audio
15
06-06-2023 06:27 AM
Unable to Read ECU
JLSM511
Stock Problems/Issues
2
02-25-2016 01:02 PM
Rebuild and ported Superchargers starting at 950.00
SneedSpeed
Vendor Announcements
0
09-10-2015 07:22 AM
MINI Cooper Turbo Porting Benefits
Mini Mania
Drivetrain Products
0
09-02-2015 11:15 AM
Back to Subforum
R50/R53 :: Hatch Talk (2002-2006)
View Next Unread
15% SC pulley and 2% Crank pully = 11.5 psi :-(




Advanced Search
Quick Reply: R50/53 OBD test port


Reply Closed Thread Share
Forum Jump

All times are GMT -7. The time now is 10:22 PM.