R55 Show us your pictures of your R55 (Clubman) here
#3262
#3264
Grendl, only one thing I can say...
ZOIKES!
In a previously life I recall a Suzuki-designed and built 2.0L 32v DOHC normally aspirated 220HP V8 in a then-new Chevy Cavalier Z24. Great sleeper. I cannot help but wonder if it could be squeezed into an R55/56/57 motor compartment.
Nice logo!
ZOIKES!
In a previously life I recall a Suzuki-designed and built 2.0L 32v DOHC normally aspirated 220HP V8 in a then-new Chevy Cavalier Z24. Great sleeper. I cannot help but wonder if it could be squeezed into an R55/56/57 motor compartment.
Nice logo!
#3265
Grendl, only one thing I can say...
ZOIKES!
In a previously life I recall a Suzuki-designed and built 2.0L 32v DOHC normally aspirated 220HP V8 in a then-new Chevy Cavalier Z24. Great sleeper. I cannot help but wonder if it could be squeezed into an R55/56/57 motor compartment.
Nice logo!
ZOIKES!
In a previously life I recall a Suzuki-designed and built 2.0L 32v DOHC normally aspirated 220HP V8 in a then-new Chevy Cavalier Z24. Great sleeper. I cannot help but wonder if it could be squeezed into an R55/56/57 motor compartment.
Nice logo!
#3267
#3269
http://www.ausmotive.com/images/MINI-Cooper-D-02.jpg
#3270
Diesel, noob That's the D engine, and you'll notice the different hood and front bumper as well.
http://www.ausmotive.com/images/MINI-Cooper-D-02.jpg
http://www.ausmotive.com/images/MINI-Cooper-D-02.jpg
#3271
The lights were fairly straight forward once I figured out how to mount the extra two in the middle. The outer two were fitted by the dealer before I got the car.
Some pics on how it was done. The wiring was just a replica of the one fitted by dealer.
http://www.flickr.com/photos/1131363...03139648/show/
#3272
Our 2009 Clubman S
2 months later...
----------- ------------- ----------------
Shaved rear badges
Satin black grille surrounds
Satin black door handles
Satin black headlight rings
Light gray headlight tint
Amber blinker delete
Carbon fiber JCW mesh side scuttles
Carbon fiber gas cap
Carbon fiber license plate frame
Smoked markers & third brake
Xenon bulbs (interior & exterior)
Ruby red tail lights
Craven Speed stubby antenna
Gloss black wrapped C-pillars
17 x 7 Enkei RPM2's
NM springs
20 / 35% window tint
Coming soon:
Dry carbon roof wrap
NM exhaust
Interior wraps
and car seats
2 months later...
----------- ------------- ----------------
Shaved rear badges
Satin black grille surrounds
Satin black door handles
Satin black headlight rings
Light gray headlight tint
Amber blinker delete
Carbon fiber JCW mesh side scuttles
Carbon fiber gas cap
Carbon fiber license plate frame
Smoked markers & third brake
Xenon bulbs (interior & exterior)
Ruby red tail lights
Craven Speed stubby antenna
Gloss black wrapped C-pillars
17 x 7 Enkei RPM2's
NM springs
20 / 35% window tint
Coming soon:
Dry carbon roof wrap
NM exhaust
Interior wraps
and car seats
#3274
Here is my MB Factory JCW. 1st two pictures are from the pick up day. Last one is just after I got my custom vinyl roof design. Nothing else much has changed except the orange indicators have now gone. Future mods are strut brace and lowering. Also booked in for some detailing in a couple of weeks to get rid of some of the holgrams and swirls and give me a good base to maintain the finish.
Thanks for looking!
Thanks for looking!