R55 How do I know the LSD is installed?
#1
#3
Guest
Posts: n/a
Armed with a torque wrench, jack up on side, leaving the other planted firmly on pavement (secure MINI with blocks, as you leave it in neutral and NO HANDBRAKE!). Try to turn the lifted wheel using the torque wrench, and note at which setting the 'click' actually begins to move the wheel..this is the torque required to overcome the clutch (typically less than 30ft/lbs but the manual should indicate the exact torque required). If both wheels jacked in the air, both should spin the same direction.
Thread
Thread Starter
Forum
Replies
Last Post