R55 Clubman with TSW lower chassis brace ?
#26
Here’s a copy of a post from 10/26/19 elsewhere:
Drove the front up on Rhino ramps
and put on some Ultra Racing chassis
braces on this am. Lower front and lower mid.
Feels a bit more solid on rough roads
and a little quicker steering response on
good roads. You have to take the
plate under the mid exhaust off to put the
mid brace’s back 4 bolts on, but it’s much
more solid than the OEM plate that you
remove.
About 2-2.5” tall, but tucked up so
I’m only losing a little more than an
inch of ground clearance, and I’m
not lowered, so no worries there.
pics are a bit limited as not much room to
get a good view on ramps.
Note: I tried loading these pics
several times, and each time it
flipped the images upside down.
Go figure...I give up.
Drove the front up on Rhino ramps
and put on some Ultra Racing chassis
braces on this am. Lower front and lower mid.
Feels a bit more solid on rough roads
and a little quicker steering response on
good roads. You have to take the
plate under the mid exhaust off to put the
mid brace’s back 4 bolts on, but it’s much
more solid than the OEM plate that you
remove.
About 2-2.5” tall, but tucked up so
I’m only losing a little more than an
inch of ground clearance, and I’m
not lowered, so no worries there.
pics are a bit limited as not much room to
get a good view on ramps.
Note: I tried loading these pics
several times, and each time it
flipped the images upside down.
Go figure...I give up.
Last edited by cristo; 12-24-2019 at 08:51 PM.
The following users liked this post:
ECSTuning (12-27-2019)
Thread
Thread Starter
Forum
Replies
Last Post
astroBlackMetallic_Mini
R50/R53 :: Hatch Talk (2002-2006)
3
05-15-2013 02:59 PM