R56 Catch Can Differences
#1
#2
NM make great hardware....I have a few of their stuff on my MINI. I went with the BSH for two reasons. First it has a dipstick which is real convenient, second, it has a accumulator screen that helps trap the oil vapor so it collects in the OCC. Not sure if NM has the screen as the literature doesn't say so, but they don't have a dipstick.
I've had it installed (with the PCV block) for about 2 months and have not used any oil at all and couldn't be happier with the purchase.
I've had it installed (with the PCV block) for about 2 months and have not used any oil at all and couldn't be happier with the purchase.
#3
#4
NM-Engineering took the engineering time and research to provide a two bolt mounting surface both on the OEM hood sensor tab, and the firewall.
They also include the block off plug for the passenger side PCV port.
But agree with others above, and myself being a BSH catch can owner: the easy-access dipstick allows for quick, clean evacuation of the can.
- Erik
They also include the block off plug for the passenger side PCV port.
But agree with others above, and myself being a BSH catch can owner: the easy-access dipstick allows for quick, clean evacuation of the can.
- Erik
Thread
Thread Starter
Forum
Replies
Last Post
patsum
R50/R53 :: Hatch Talk (2002-2006)
26
05-29-2021 06:29 PM
larryd96
R50/R53 :: Hatch Talk (2002-2006)
11
09-08-2015 05:01 AM