R56 :: Hatch Talk (2007+) MINI Cooper and Cooper S (R56) hatchback discussion.
Sponsored by:
Sponsored by:

R56 Passenger Windindow Won't Stay Up

Thread Tools
 
Search this Thread
 
  #1  
Old 02-21-2013, 11:09 PM
Sandwalk3r's Avatar
Sandwalk3r
Sandwalk3r is offline
1st Gear
Thread Starter
Join Date: Mar 2010
Posts: 44
Likes: 0
Received 6 Likes on 2 Posts
Passenger Windindow Won't Stay Up

Anyone else had either their driver or passenger side window go all the way up and then decide to ride 50% of the way back down?

Whereas I used to flip the toggle once and get it all the way up, now it comes halfway back down. It takes some playing with for me to manually stop it just shy of 100% up while still being enough to seal from rain.

I'm auto mechanically challenged, but I'd rather find a DIY solution. Anyone have similar problems?
 
  #2  
Old 02-22-2013, 06:50 AM
Chimera's Avatar
Chimera
Chimera is offline
5th Gear
iTrader: (1)
Join Date: Jun 2006
Location: Barre, VT
Posts: 610
Likes: 0
Received 0 Likes on 0 Posts
Mine did that, and while there are some DIY fixes none of them worked for me and it required a computer reflash at the dealer to reset everything.
 
  #3  
Old 02-22-2013, 08:08 AM
strobeyprobey's Avatar
strobeyprobey
strobeyprobey is offline
6th Gear
Join Date: Apr 2008
Location: Twin Cities, Minnesota
Posts: 1,303
Likes: 0
Received 11 Likes on 10 Posts
MINI has a service bulletin on this is issue.

Yes as stated above, you need to get your FRM module updated to fix this particular window issue. Some independent shops can do this if they have access to ISTA/P.
 
  #4  
Old 02-22-2013, 09:15 AM
Kenny the kid's Avatar
Kenny the kid
Kenny the kid is offline
2nd Gear
Join Date: Dec 2006
Location: Wichita is
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
Try this procedure from the Bentley manual .
Close doors and windows
Switch ignition on
Move window approx half way down
Disconnect power to window motor - remove window motor fuse
Actuate power window switch several times to clear previous initialization
Reconnect window motor power - replace fuse
With window motor powered open window fully
After reaching lower position, move window without interruption to upper position and hold switch for at least 2 seconds in close position. This completes initialization.

Hope this works for you. Let us know
 
  #5  
Old 02-22-2013, 01:49 PM
strobeyprobey's Avatar
strobeyprobey
strobeyprobey is offline
6th Gear
Join Date: Apr 2008
Location: Twin Cities, Minnesota
Posts: 1,303
Likes: 0
Received 11 Likes on 10 Posts
That procedure won't work when the window bounces to the half-open position.
 
  #6  
Old 02-22-2013, 04:42 PM
CLAG's Avatar
CLAG
CLAG is offline
3rd Gear
Join Date: Mar 2008
Location: King George, Virginia
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
it's a PITA problem -- get the dealer to re-program the windows. it takes a while.

some think that if you put the window all the way down (instead of half or part-way down), then up, will help keep the sensors calibrated.
 
  #7  
Old 02-23-2013, 09:55 AM
strobeyprobey's Avatar
strobeyprobey
strobeyprobey is offline
6th Gear
Join Date: Apr 2008
Location: Twin Cities, Minnesota
Posts: 1,303
Likes: 0
Received 11 Likes on 10 Posts
Cycling the windows up and down fully was recommended in that is supposedly resets the counter that keeps track of the window position.
 
  #8  
Old 03-23-2014, 05:24 PM
vbmike's Avatar
vbmike
vbmike is offline
1st Gear
Join Date: Aug 2013
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
I've read a few other threads that this is a common problem and that going to the deal for reprogramming is the only fix. Do they charge for this, if so how much? My car is no longer under warranty and the passenger windows just started doing this.
 
  #9  
Old 03-24-2014, 12:13 PM
DOtheDEW's Avatar
DOtheDEW
DOtheDEW is offline
4th Gear
Join Date: Apr 2012
Location: Boston, MA
Posts: 361
Likes: 0
Received 6 Likes on 5 Posts
My 12 mcs does this all the time to my driverside window, ive been to the dealer 5 times about this amd all they do is reprogram the computer which works for a few hours then does the same thing. Also my driverside window is noticeably slower than the passenger.
 
  #10  
Old 03-24-2014, 09:06 PM
thebutternutter's Avatar
thebutternutter
thebutternutter is offline
2nd Gear
Join Date: Jan 2014
Location: Upstate NY
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DOtheDEW
My 12 mcs does this all the time to my driverside window, ive been to the dealer 5 times about this amd all they do is reprogram the computer which works for a few hours then does the same thing. Also my driverside window is noticeably slower than the passenger.
'11 MCS. I've experienced putting the window auto-up, only to have it come back down to 50%. Then one morning I walked out of the house to bring the car in to the dealer for a totally unrelated issue and found both windows all the way down. I mentioned this to my service advisor and he gave me a look like I had 3 heads. All they did was reset the window synchronization. I just picked the car up yesterday, so we'll see....

My driver side window is slower than the passenger as well.
 
  #11  
Old 03-25-2014, 12:09 PM
Spridget's Avatar
Spridget
Spridget is offline
4th Gear
Join Date: Jun 2008
Posts: 425
Likes: 0
Received 0 Likes on 0 Posts
Makes the old window cranks look pretty clever, doesn't it?

;-)

Spridget
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Witsticka
1st Gear
32
09-15-2015 01:33 PM
Tinklespout
R50/R53 :: Hatch Talk (2002-2006)
16
09-06-2015 11:39 AM
Ntety
MINIs & Minis for Sale
0
09-02-2015 08:39 PM
spackletooms
MINI Parts for Sale
0
09-01-2015 10:12 PM



Quick Reply: R56 Passenger Windindow Won't Stay Up



All times are GMT -7. The time now is 12:53 PM.