Hi All, I was hoping some here might be able to help me with pricing some NM RSe05 wheels. I had purchased a Mini GP new from a Chicago dealer in December of 2014, and had planned on using it for both Autocross and Track Day events in place of a track only 914-6 I had just sold. I did autocross first and found the car extremely enjoyable in that setting, as I did for street driving. Unfortunately when I first tried the car on track at one of the SCCA track night events, I found that there was a bit of and old dog learning new tricks thing when driving the car on track. Rather than fight it, I went ahead and sold the car and ordered a rear drive vehicle more in keeping with my previous track experience, but unfortunately not until I had already purchased some really nice NM Engineering RSe05 wheels in red for track use. I never mounted tires on the wheels or even actually opened the second box, so they are realistically new wheels, except I am a private seller rather than a dealer. I also got some TPMS sensors from ECS to use with the wheels, as well as a couple of 5mm spacers in case I wanted to move the wheels out in the fenders slightly.


I paid right at $1000 for the wheels and $235ish for the sensors. Not sure what the spacers were, but I figure I would just throw them in with the wheels anyway.

They are 17 x 7.5" +45mm offset


Do you feel I would be better off selling the entire package together or splitting the wheels and sensors? I was thinking that somewhere around $850. for the entire package plus actual shipping might be a realistic price for the whole package, but I really don't know.


Also, better to try and sell them on the forum, or go to eBay motors??


I would really appreciate any assistance and suggestions you might have!!


Here are a couple of pic's of the Wheels.

 

Well, rather than wait for a response, I have impatiently posted the Wheels etc on the marketplace for an asking price of $800 for everything. Take a look if you are in the market.


Thanks Again!!