R56 R56 oil leak
#26
#27
#29
set of these will help…
the goal is to spin it as fast as possible to create the heat needed to help melt the plastic. So air wrench might do it. You can probably find these at a local automotive store as well.
the goal is to spin it as fast as possible to create the heat needed to help melt the plastic. So air wrench might do it. You can probably find these at a local automotive store as well.
#31
#32
#35
#38
#40
https://www.ecstuning.com/b-genuine-...h/63122752224/ - you're welcome 😁
We have aftermarket and a kit also.
https://www.ecstuning.com/Search/Sit...h/63122752224/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#43
#45
#46
All the heat protection is removed with the down pipe now to figure what I am seeing.
I did evidently not disconnect batter when I should have the front heat protector touched the alternator once, one spark.
do not know if that would cause any damage?
What is that in upper right of photo?
I did evidently not disconnect batter when I should have the front heat protector touched the alternator once, one spark.
do not know if that would cause any damage?
What is that in upper right of photo?
#47
#50
Thier was a recall on them a while back and everyone should have gotten the updated part number 11538843817 . If you are out of the recall then just get a new one. They buzz after the car cools down, thats how you know they work and they run for a couple minutes. If no buzz or noise when car shuts off then they are not working or they can run for a long time and never stop(failed unit). The older design was a fire risk.
https://www.northamericanmotoring.co...lant-pump.html
https://www.northamericanmotoring.co...lant-pump.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172