When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They look great! I also like how the white looks against the astro black. Been thinking about getting stripes and was torn between flat black and white.
After seeing yours I think I'll go with white.
I like these from Aesthetic Creations on the Astro Black. Just on the bonnet though, don't love it down the grill.
or these, not necessarily CF, but silver Shelby is cool.
Nice, love those stripes. Hard to see but are they matte?
Annette
Right, they are matte, as in not glossy. They actually had to replace the stripes as the valve to keep the windshield washer spray was missing? the fluid dripped over the strip and left a stain.
mental note, don't let washer fluid sit idle on the hood or stripe...
Both look great! Aesthetic Creations has a really good selection of stripes. I'll probably get mine from them.
Did you apply them yourself? If so, was it difficult?
I don't have the stripes on my '11 yet. I'm having Aesthetic Creations put them on at the Dragon. I did the pinstripes on my '06 and some other graphics. It wasn't difficult, just time consuming as I wanted them to be perfect. There are quite a few people who do their own, and if I still had my '06 my plan was to remove the old stripes and put some new ones on myself, but alas it wasn't to be. If Mike wasn't going to be at the Dragon, I'd just do them myself.
Annette
Hey has anyone ever tried polishing/waxing gloss vinyl? I know it sounds strange but I have micro scratches and swirls on my stripes now. The meguairs wax says not to use on vinyl, rubber, plastic or anything that isn't painted. So I am wondering what to do? Any suggestions are welcome. Same thing for my JCW CF Hood scoop, how do you guys keep that thing shiny as well?
I can't speak to the CF hood scoop... but wrt the vinyl; it depends. If they are the factory bonnet stripes I wouldn't wax them... because they are "printed" vinyl. I had factory bonnet stripes for about 6 months, before a hail storm came through & caused enough damage that required the hood to be repainted. Afterwards, I had some custom "Cut Vinyl" installed by Todd Pearson (www.toddsmods.com), of WhiteRoofRadio fame.
He explained to me, that the printed vinyl doesn't take to being waxed because it will break down the thin ink, used to give you the pattern/colors you paid for, and you'll either wax it right off... or smear the poo out of it. His method of using the "Cut Vinyl" (for solid color stripes) is much more durable, because the vinyl IS the color you see; therefore, no chance of bleeding it down. He actually recommended that I wax the vinyl (with a good carnuba) to help it last.
(now, whether its just a good way for him to get repeat business or not... I'm not 100% sure. But one things for sure, I don't have to worry about the ink chipping, flaking, or smearing off of my stripes!)
Went from this:
to this:
Last edited by masavacool; 03-30-2011 at 04:45 PM.
Thump, I feel your climate pain! Moved out west for a few years (Vegas x 2/Tucson x 1) and much prefer our wet heat here in the South. Sweet wheels! Actually I dig the whole look. Good job.
I can't speak to the CF hood scoop... but wrt the vinyl; it depends. If they are the factory bonnet stripes I wouldn't wax them... because they are "printed" vinyl. I had factory bonnet stripes for about 6 months, before a hail storm came through & caused enough damage that required the hood to be repainted. Afterwards, I had some custom "Cut Vinyl" installed by Todd Pearson (www.toddsmods.com), of WhiteRoofRadio fame.
He explained to me, that the printed vinyl doesn't take to being waxed because it will break down the thin ink, used to give you the pattern/colors you paid for, and you'll either wax it right off... or smear the poo out of it. His method of using the "Cut Vinyl" (for solid color stripes) is much more durable, because the vinyl IS the color you see; therefore, no chance of bleeding it down. He actually recommended that I wax the vinyl (with a good carnuba) to help it last.
(now, whether its just a good way for him to get repeat business or not... I'm not 100% sure. But one things for sure, I don't have to worry about the ink chipping, flaking, or smearing off of my stripes!)
Went from this:
to this:
Those stripes are badass!, Nice job...very unique Yeah, I taped off my stripes and other vinyl because I was unsure. I don't have any flaking or paint coming off as of yet, but I'll look out for that. Probably get some upgraded stripes like you did down the line.
Those stripes are badass!, Nice job...very unique Yeah, I taped off my stripes and other vinyl because I was unsure. I don't have any flaking or paint coming off as of yet, but I'll look out for that. Probably get some upgraded stripes like you did down the line.
The new stripes are some of the most unique I've seen, looks real good!