R56 Please post pictures of your R56 here...
#7752
http://www.amazon.com/Small-Deceptic.../dp/B002MLM684
That one in the link is out of stock, but I found lots of them when I searched small decepticon car emblem
#7753
3rd Gear
iTrader: (1)
Join Date: Jan 2010
Location: SA, Tx.
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
..I was browsing at some others recently on another site (zazzle)...these would be funny..
#7754
Or, I just remembered, if you're looking for something like J&M'sMini's MINI logo, e-mail Owen at 5zero4Designs (5zero4designs@gmail.com). He can make the logo look however you want, and it's automotive vinyl, so it just goes right over top of the MINI on your MINI emblem.
#7755
Bored so I dug up and edited an older shot of mine. Enjoy!
High-Res: http://www.flickr.com/photos/2467323...in/photostream
-G.B.
High-Res: http://www.flickr.com/photos/2467323...in/photostream
-G.B.
#7756
Bored so I dug up and edited an older shot of mine. Enjoy!
High-Res: http://www.flickr.com/photos/2467323...in/photostream
-G.B.
High-Res: http://www.flickr.com/photos/2467323...in/photostream
-G.B.
#7757
#7758
From this evening
Had a nice thunderstorm in Reno this evening.
High-res: http://www.flickr.com/photos/24673238@N07/5989252369/
-G.B.
High-res: http://www.flickr.com/photos/24673238@N07/5989252369/
-G.B.
#7771
3rd Gear
iTrader: (1)
Join Date: Dec 2008
Location: Fayetteville, AR
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I'm down about 1", maybe a hair more. I was only looking for a very mild drop to get rid of some of the gap. I went coilovers because I wanted to be able to go lower later if I wanted to. And, my choice in ST coilovers was because of KW's reputuation. The ST coilovers are made/owned by KW and the shocks/springs are essentially KW V1 with less warranty.
I also didn't want to do just springs. I've never had good results just changing the springs. Most of the time, for me, the initial ride is great but it degrades quickly. I didn't want to have to do another suspension job in a year. I wanted to do it all at once.
Also, this coilover was less than $1K shipped. I was originally going to go with NM springs and Koni's, but that combo was more than this setup.
I also didn't want to do just springs. I've never had good results just changing the springs. Most of the time, for me, the initial ride is great but it degrades quickly. I didn't want to have to do another suspension job in a year. I wanted to do it all at once.
Also, this coilover was less than $1K shipped. I was originally going to go with NM springs and Koni's, but that combo was more than this setup.